EARUELETRIC PC321-TY

Contents

Tuya Smart Life 3 Phase WiFi Energy KWH Meter

Model: PC321-TY | Brand: EARUELETRIC

1. Welcome

The PC321-TY Power Clamp is designed to help you monitor electricity usage in your facility by connecting the clamp to the power cable. It can measure Voltage, Current, Power Factor, and Active Power in real-time. This guide provides an overview of the product and assists with initial setup and installation.

Tuya Smart Life 3 Phase WiFi Energy KWH Meter with features listed
Product overview showing the meter, current transformers (CTs), antenna, and key features like bi-directional measurement and real-time monitoring.

Features:

  • Tuya compliant, supporting Tap-to-Run and automation with other Tuya devices.
  • Compatible with Single and 3-phase electricity systems.
  • Includes three current transformers for single-phase applications.
  • Measures real-time Voltage, Current, Power Factor, Active Power, and total energy consumption.
  • Displays the current temperature of the device on the App.
  • Suitable for both residential and commercial applications.
  • Lightweight and easy to install.

2. Safety Handling

WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Power Clamp and other property. Read all the safety notices below before using the Power Clamp.

  • Avoid high humidity or extreme temperatures.
  • Avoid long exposure to direct sunlight or strong ultraviolet light.
  • Do not drop or expose the unit to intense vibration.
  • Do not disassemble or try to repair the unit on your own.
  • Do not expose the unit or its accessories to flammable liquids, gases, or other explosives.

3. Get to Know Your Device

Familiarize yourself with the main components of the Power Clamp:

Diagram showing the Power Clamp device with LED indicator, CT ports, AC input, and reset button.
The Power Clamp device, highlighting the LED indicator, CT (Current Transformer) cable ports (CT1, CT2, CT3), AC Input cable connection, and the Reset Button.

Reset Button:

Press and hold the reset button for 5 seconds until the LED indicator flashes 3 times quickly to restore the power clamp to default factory settings (energy data will be cleared). This will put the device into EZ mode for 3 minutes.

LED Indicator Status:

LED Status Meaning
Green LED (Rapidly blink) EZ pair mode
Green LED (Slowly blink) AP pair mode
Green LED (Solid on) Device has connected with router
No light Device cannot connect with router

4. Installation

Important safety information! The power clamp must be installed and serviced only by a qualified electrical personnel.

  • Do not touch the terminals of the device during testing.
  • Turn off all power supply for this equipment before installing.
  • Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
  • Always use a properly rated voltage sensing device to confirm power is off.
  • Replace all devices, doors, and covers before applying power to the equipment.
  • Failure to follow these instructions will result in death or serious injury.

Getting Started:

Please ensure the main power in your facility is off before installing. Follow the schematics below as an example to wire the Power Clamp for different phases.

4.1. Wiring Diagrams

Bi-directional measurement wiring diagram for solar and grid systems
Bi-directional Measurement Technology: This diagram illustrates how to connect the CT clamps for measuring energy production (from inverter to grid) and usage (from grid to load). Clip Clamp1 onto Grid, Clamp2 onto Inverter, and Clamp3 onto Load, ensuring the clamp direction points correctly.

For detailed wiring for 3-phase and single-phase electricity, refer to the diagrams in the official user manual (PDF) linked in the 'Warranty & Support' section.

4.2. Connecting Current Transformer (CT) Cables

  1. Connect the AC Input cable to a socket near the Electrical Box to power on the Power Clamp according to the corresponding phase wiring diagram.
  2. Attach both ends of the Current Transformer Cables as shown in the image below. Then, spin the waterproof latch clockwise until both ends are tightened and secured.
Close-up of CT cable connection
Proper connection of the Current Transformer (CT) cables, showing the waterproof latch being secured.

4.3. Applying the Clamp

  1. Open the clamp as shown below and apply it to the electric meter cable. The arrow on the clamp (P1→P2) should face the correct direction of the electricity current flow. If the arrow faces the reverse direction, the reading meter will display 0.
Illustration of CT clamp application on a cable
Illustration demonstrating how to open and apply the CT clamp to a cable, indicating the correct direction of current flow (P1 to P2).

Tips about the clamp:

  • Cable diameter does not affect usage as long as the cable can pass through the clamp hole.
  • The meter has three clamps which can be applied to cable devices for separate measurement. If applied to the same cable, all clamps will produce the same reading.

5. Configure Network

5.1. Requirements:

  • Connect your phone to a 2.4Ghz Wi-Fi network.
  • A mobile phone with the 'SmartLife' APP installed.

5.2. Adding Devices (EZ Pair Mode - Default):

  1. Power on the power clamp.
  2. Ensure the LED indicator is flashing green rapidly. If not, reset the device.
  3. Open the SmartLife App. Log in or create an account.
  4. Click the '+' button at the top right corner of the App to add devices.
  5. Select 'Switch Module' under the 'Energy' list to add the Power Clamp manually.
  6. Enter your home Wi-Fi (2.4Ghz only) account and password, then tap "Next".
  7. Place the router, mobile phone, and Power Clamp as close as possible. Confirm the green indicator on your device is rapidly blinking, then tap 'Next' in the app to wait for connection.
  8. After successful connection, you can rename the device and click "Done".

5.3. Adding Devices (AP Pair Mode):

Use AP pair mode if you want to pair one specific device among many, or if EZ pair mode fails.

  1. Reset the device in EZ pair mode; it will then switch to AP mode. The indicator on your device will blink slowly.
  2. In the SmartLife App, switch the network configuration mode to AP mode (usually an option in the upper right corner when adding a device).
  3. Place the router, mobile phone, and Power Clamp as close as possible. Confirm the indicator on your device is slowly blinking, then tap 'Next' to wait for connection.
  4. Find and connect to the device's hotspot in your phone's Wi-Fi list (e.g., "SmartLife-XXXX").
  5. Return to the SmartLife App to complete the connection.

6. Mounting

The Power Clamp includes a mounting bracket for installation.

  1. Use the mounting bracket as a template to mark the two holes on the wall for installing screws.
  2. Screw the mounting bracket onto the wall according to the marked location. Install wall plugs if necessary.
  3. Locate the hooks of the mounting bracket and line up the hooks with the mounting holes on the Power Clamp. Fit the hooks into the mounting holes. Installation is now completed.
Mounting bracket template usage
Using the mounting bracket as a template to mark screw holes on the wall.
Mounting bracket installation
Securing the Power Clamp onto the installed mounting bracket.

7. Operating the Device

Once installed and connected to your Wi-Fi network, the Power Clamp can be operated and monitored via the Tuya Smart Life App.

Real-time Monitoring:

The app provides real-time data for Voltage, Current, Active Power, and Power Factor. You can view daily, weekly, and monthly consumption and production data with charts.

App interface for real-time monitoring and historical data
Screenshot of the Smart Life App interface showing total energy consumed, energy consumed per phase, and energy produced per phase, along with live data for voltage, current, and power factor.

Energy Production and Consumption:

The device supports bi-directional measurement, allowing you to monitor how much energy you are consuming and how much excess energy you are producing back to the grid.

Automation and Smart Home Integration:

Being Tuya compliant, the device can be integrated into smart home routines and automation scenarios with other Tuya-compatible devices.

8. Technical Specifications

Product dimensions and technical parameters table
Diagram showing the dimensions of the Power Clamp and antenna, along with a table of product parameters.
Parameter Value
Model Number PC321-TY
DIY Supplies Electrical
Operating Voltage 100-240V AC 50/60 Hz
Voltage Range Other
Wi-Fi 802.11 B/G/N20/N40
RF Characteristics Operating frequency: 2.4GHz
Calibrated Metering Accuracy ≤ 100W (Within ±2W), >100W (Within ±2%)
CT Provided 80A (default), 120A/200A/300A (optional)
Operating Temperature -20 ℃ - +55 ℃
Operating Humidity ≤ 90% non-condensing
Dimensions 86(L) x 86(W) x 37(H) mm
Accuracy Class 1%
Power Supply AC
State of Assembly Ready-to-Go
Report Cycle 5 seconds
Certification CE, RoHS
Origin Mainland China
CT clamp direction and dimensions table
CT clamp dimensions for various current ratings (80A to 1000A), including inner diameter (Φ) and outer dimensions (A, B, C, E, G).

9. Maintenance

The PC321-TY Power Clamp is designed for low maintenance. Keep the device clean and free from dust. Ensure all cable connections are secure and free from damage. Avoid exposing the device to harsh environmental conditions beyond its specified operating temperature and humidity ranges.

If the device requires cleaning, use a soft, dry cloth. Do not use liquid cleaners or solvents.

10. Troubleshooting (FAQ)

Q1: How to identify if the Power Clamp is powered on?

A: Press the reset button once. If the LED indicator flashes red 3 times, the device is powered on.

Q2: Wi-Fi configuration of the device failed. What should I do?

A:

  • Confirm the entered router password is correct.
  • Ensure that the DHCP service is enabled for your router. If not, the IP address might be occupied.
  • Confirm your Wi-Fi network is stable. Place your phone next to the device and ensure both are in the same network environment. Try opening a website to verify network connectivity.
  • If your router supports both 2.4Ghz and 5Ghz, enable the 2.4Ghz channel and add the device under the 2.4G Wi-Fi channel. You may need to configure your router settings.
  • Confirm that both the location permission for your phone system and the SmartLife App are enabled.
  • If you have upgraded your iOS system to version 14 or higher, you need to enable 'Local Network' access for the SmartLife App.
  • If it still does not work, it is recommended to change the router or try again.

Q3: Device offline. What should I do?

A:

  • Confirm whether the Power Clamp is powered on.
  • Please confirm whether the home Wi-Fi network is normal, or whether the Wi-Fi name and password has been modified.
  • If there are still problems after the above checks, it is recommended to remove the device from the app or change the router to add it again.

Q4: Does the device record voltage for all phases? Can alarm parameters for maximum and minimum voltage be set?

A: The device is designed to monitor and record real-time voltage, current, power factor, and active power. While it supports 3-phase electricity, specific details on recording individual phase voltages and setting alarm thresholds for voltage are typically managed within the Smart Life app's advanced settings or automation rules. Please consult the app's documentation for detailed configuration options regarding multi-phase voltage recording and alarm settings.

11. User Tips

  • Users have found the installation process to be very practical and the application handling to be simple.
  • The compact size of the device is ideal for various installations.

12. Warranty & Support

For detailed warranty information and further technical support, please refer to the official user manual provided by the manufacturer. A PDF version of the user manual is available for download:

Download User Manual (PDF)

This document contains comprehensive instructions and diagrams for installation, operation, and troubleshooting.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.