Mercedes Benz 2114270020

Contents

Handbrake Lever Handle Switch User Manual

For Mercedes Benz E Class W211 (2003-2006)

Product Information

This manual provides instructions for the installation, operation, and maintenance of the replacement Handbrake Lever Handle Switch for Mercedes Benz E Class W211 vehicles manufactured between 2003 and 2006.

Product Name: Auto Parts - Handbrake Lever Handle Switch
Model: Handbrake Lever

Safety & Warnings

  • Inspect the product before each use; do not use if damaged.
  • Follow all installation and operation guidelines to avoid damage to the product or vehicle.
  • CHOKING HAZARD: This product contains small parts. Keep out of reach of children under 3 years of age.

Setup and Installation

This product is designed as a direct replacement part. Ensure your vehicle is safely parked with the engine off and the wheels chocked before beginning installation.

Components Overview

Exploded view of handbrake lever assembly
Figure 1: Handbrake Lever Assembly Components. The assembly consists of the Handbrake Pedestal and the Handbrake Lever.

Installation Steps

  1. Remove Old Product:
    • Locate the existing handbrake release handle on your vehicle's dashboard.
    • Using a T20 Torx screwdriver, remove the two screws securing the old handle.
    • Gently pull the broken handle assembly towards you to disengage it from its mounting points.
    • Using long-nose pliers, carefully slide the parking brake cable out of its slot on the old handle.
  2. Inspect Mounting Area: Check the product surface and the vehicle's mounting area for any product residue, debris, or damage. Clean as necessary.
  3. Install New Product:
    • Carefully attach the parking brake cable to the new handbrake lever assembly.
    • Align the new handbrake lever assembly with the mounting points in the dashboard and push it firmly into place until it clicks.
    • Secure the new assembly with the two T20 Torx screws.
Video 1: Installation Guide. This video demonstrates the removal of the old handbrake lever and the installation of the new one.

Visual Reference

Left Hand Driving (LHD) handbrake lever
Figure 2: Left Hand Driving (LHD) Version. Front, side, and bottom views of the LHD handbrake lever.
Right Hand Driving (RHD) handbrake lever
Figure 3: Right Hand Driving (RHD) Version. Front, side, and bottom views of the RHD handbrake lever.
Handbrake lever installed in dashboard
Figure 4: Installed Handbrake Lever. The handbrake lever seamlessly integrated into the vehicle's dashboard.

Operating Instructions

The handbrake lever handle switch operates the vehicle's parking brake release mechanism.

  • To Release the Parking Brake: Press the handbrake lever handle switch firmly.
  • To Engage the Parking Brake: Use the foot pedal (if applicable to your vehicle model) or other designated mechanism to engage the parking brake. The lever is primarily for release.

Maintenance

This product requires minimal maintenance.

  • Keep the lever and surrounding area clean and free from dust and debris.
  • Avoid using harsh chemicals or abrasive cleaners, which may damage the PC&ABS material. Use a soft, damp cloth for cleaning.

Troubleshooting

If you experience issues with the handbrake lever handle switch, consider the following:

  • Lever Does Not Operate Smoothly: Check for any visible obstructions around the lever. Ensure the parking brake cable is correctly seated and not kinked.
  • Parking Brake Not Releasing: Verify that the cable is properly connected to the lever and the parking brake mechanism. If the issue persists, consult a professional mechanic.

Specifications

Part TypeHandbrake Lever Handle Switch
OEM NO. (LHD)2114270020, 2114200077
OEM NO. (RHD)2114270120, 2114200077
ApplicationMercedes Benz E Class W211 (2003-2006)
MaterialPC & ABS
ColorBlack
Length100mm
Width35mm
Height70mm
Net Weight70g
Dimensions of the handbrake lever
Figure 5: Product Dimensions. Length: 100mm, Width: 35mm, Height: 70mm.

User Tips

  • Upon receiving the product, carefully inspect the packaging and the item itself for any damage incurred during shipping.
  • Ensure compatibility: This handbrake lever is specifically designed for Mercedes Benz E Class W211 models from 2003 to 2006. It may not be suitable for other vehicle makes or models.
  • If you are unsure about the installation process, it is recommended to seek assistance from a qualified automotive technician.

Warranty & Support

For any warranty claims, technical support, or inquiries regarding this product, please contact the seller directly through your purchase platform. Keep your order details readily available for faster assistance.

© 2023 Product Manual. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.