1. Introduction
The ZK-APTX3 is a high-performance 2.1 channel Bluetooth amplifier board designed for theater audio and stereo equalization. It features two TPA3255 amplifier chips and six JRC2068 op-amps, delivering powerful output for both stereo channels and a dedicated subwoofer. The integrated QCC3034 Qualcomm Bluetooth module supports advanced audio codecs including APTX, APTX-LL, and APTX-HD, ensuring high-quality wireless audio transmission. This board is equipped with robust thermal management and multiple protection mechanisms for reliable operation.
2. Product Features
- High-performance 2.1 channel Bluetooth amplifier board.
- Utilizes two TI original TPA3255 amplifier chips and six JRC2068 op-amps.
- Integrated QCC3034 Qualcomm Bluetooth module supporting SBC, AAC, APTX, APTX-LL, and APTX-HD codecs.
- High power digital amplifier dedicated inductor for improved sound quality and anti-electromagnetic interference.
- Efficient heat dissipation with a thickened heat sink, copper strip heat conduction, and a quiet fan.
- Comprehensive protection mechanisms: input undervoltage, overheating, overcurrent, and short circuit protection.
3. Specifications
| Parameter | Value |
|---|---|
| Product Name | 2.1 Channel Qualcomm BT Amplifier Board |
| Product Model | APTX3 |
| Working Voltage Range | 18-50VDC (No sound below 16V) |
| Recommended Voltage/Current | 36V-48VDC, 12A or above |
| Left/Right Channel Max Power | 300W@50V, 4Ω; 160W@50V, 8Ω |
| Subwoofer Max Power | 600W@50V, 2Ω; 300W@50V, 4Ω; 160W@50V, 8Ω |
| Compatible Left/Right Speakers | 3-8 ohms, up to 300W |
| Compatible Subwoofer Speakers | 2-8 ohms, up to 600W |
| Bluetooth Chip | QCC3034 |
| Bluetooth Transmission Distance | 15 meters |
| Input Method | Bluetooth + AUX (Bluetooth priority) |
| Number of Channels | 2.1 (Left, Right, Subwoofer) |
| Amplifier Chip | Two TI original TPA3255 |
| Protection Mechanisms | Input undervoltage, overheating, overcurrent, short circuit protection |
| Product Size (Integrated) | 152 x 120 x 37mm |
| Product Size (External Lead Type) | 131 x 120 x 37mm |
4. Safety Precautions
- WARNING: Use DC power supply ONLY. AC power is NOT supported.
- CAUTION: Reversing the positive and negative poles of the power supply will cause permanent damage to the board.
- If using a DC/DC boost module, adjust its output to no more than 80% of the limit voltage to prevent damage from overshoot or ripple overvoltage.
- Ensure proper ventilation to prevent overheating, especially during high power operation.
- Do not short-circuit the output terminals.
5. Setup Instructions
5.1 Power Supply Connection
Connect a DC power supply within the 18-50VDC range. The recommended voltage is 36V-48VDC with a current of 12A or above. Ensure correct polarity (positive to +DC, negative to -DC). The board will not produce sound if the voltage is below 16V.
Important: Only use DC power. AC power is not compatible and will damage the board.
5.2 Speaker Connection
The ZK-APTX3 supports a 2.1 channel setup (Left, Right, Subwoofer). Refer to the diagram below for proper speaker wiring.
- Left and Right Channels: Connect 3-8 ohm speakers (up to 300W each) to the corresponding output terminals.
- Subwoofer Channel: Connect a 2-8 ohm subwoofer (up to 600W) to the subwoofer output terminals.
- Optional: For low-frequency or full-range speakers, they can be directly connected. For tweeters, connect them in series with a 2.2uF capacitor to the subwoofer output.
5.3 Audio Input
The board supports both Bluetooth and AUX audio input. Bluetooth has priority. If you wish to use AUX input, ensure that the Bluetooth connection is disconnected.
5.4 AMP Extension Interface (Optional)
The board features an extension interface for connecting a microphone front stage board (e.g., ZK-AMP). When using this interface, the dial switch (labeled 1, 2, 3) on the amplifier board must be turned to the OFF position.
- Power Supply for Extension: Connect an 8-26VDC power supply to the microphone socket board.
- Expansion Port 1: Connects to the microphone front stage board reverb input.
- Expansion Port 2: Connects to the microphone front stage board reverb output.
6. Operating Instructions
6.1 Power On/Off
Once all connections are secure, apply DC power. The board will power on automatically. Disconnect the DC power to turn off the board.
6.2 Bluetooth Connection
- Ensure no AUX cable is connected.
- On your audio source device (smartphone, tablet, etc.), search for Bluetooth devices.
- Select "ZK-APTX3" from the list of available devices to pair.
- Once paired, audio will be streamed wirelessly to the amplifier board.
6.3 AUX Input
To use AUX input, connect your audio source via a 3.5mm audio cable to the AUX IN port on the board. Ensure any active Bluetooth connection is disconnected, as Bluetooth has priority.
6.4 Adjusting Audio
The board features several control knobs for fine-tuning your audio experience:
- SUB FREQ: Adjusts the cutoff frequency for the subwoofer.
- SUB VOL: Controls the volume level of the subwoofer.
- TRE: Adjusts the treble (high frequencies) for the left and right channels.
- BASS: Adjusts the bass (low frequencies) for the left and right channels.
- MAIN VOL: Controls the overall master volume.
7. Maintenance
- Keep the amplifier board clean and free from dust. Use a soft, dry cloth for cleaning.
- Ensure adequate airflow around the board to prevent overheating. Do not block the fan or heatsink.
- Avoid exposing the board to moisture, extreme temperatures, or direct sunlight.
- Regularly check all connections for tightness and ensure no wires are frayed or damaged.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output |
|
|
| Distorted sound |
|
|
| Board overheats |
|
|
| Bluetooth connection issues |
|
|
| Subwoofer gain seems low |
|
|
9. User Tips
- For optimal sound, ensure your power supply provides stable voltage and sufficient current, especially when driving high-power speakers.
- Experiment with the SUB FREQ and SUB VOL knobs to find the best subwoofer balance for your listening environment and speakers.
- If using the amplifier in a car setup, note that some users have observed a Bluetooth/Aux input switching relay and speakers turning off after a 5-second pause when audio is paused.
- Always verify the authenticity of your board by checking for the Wuzhi Audio copyright logo on the fan, laser-engraved heatsink, and trademark on large capacitors.
10. Warranty and Support
For warranty information and technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
A user manual in PDF format is available for download: View User Manual (PDF)