WESA BZ-05-HUI

Contents

WESA Wall Socket Instruction Manual

Model: BZ-05-HUI

1. Introduction

Thank you for choosing the WESA Wall Socket. This manual provides essential information for the safe installation, operation, and maintenance of your new electrical outlet. Please read this manual thoroughly before installation and keep it for future reference.

WESA Wall Socket front view

Figure 1: WESA Wall Socket (Front View)

2. Safety Information

WARNING: Risk of Electric Shock. Installation should only be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring and safety standards.

  • Always turn off power at the circuit breaker or fuse box before installing or servicing the socket.
  • Do not install in wet or damp locations.
  • Ensure all wiring connections are secure and comply with local electrical codes.
  • This product is designed for indoor use only.
  • Do not exceed the specified electrical ratings (Voltage, Current).
  • The socket features a firm shell and is made from high-temperature flame-retardant material to prevent fire hazards.
High Temperature Flame Retardant Material

Figure 2: High-Temperature Flame Retardant Material for enhanced safety.

3. Package Contents

Please check the package for the following items:

  • WESA Wall Socket (BZ-05-HUI)
  • Mounting Screws (typically included with standard electrical boxes)

If any items are missing or damaged, please contact your retailer.

4. Setup and Installation

This socket is designed for wall-embedded installation. Refer to the dimension diagram below to ensure compatibility with your electrical box and wall opening.

  1. Turn off Power: Locate the circuit breaker or fuse that controls the power to the installation area and turn it OFF. Verify power is off using a voltage tester.
  2. Prepare Wiring: Carefully strip the insulation from the ends of the live, neutral, and ground wires (if applicable for your wiring system, though this model is non-grounding).
  3. Connect Wires: Connect the wires to the corresponding terminals on the back of the socket. Ensure connections are tight and secure.
  4. Mount Socket: Gently push the wired socket into the wall box. Secure it using the provided mounting screws.
  5. Install Faceplate: Attach the decorative faceplate over the socket.
  6. Restore Power: Turn the power back ON at the circuit breaker or fuse box.
  7. Test: Test the socket with a known working appliance.
WESA Wall Socket Dimensions

Figure 3: Dimensions for 1-Socket and 2-Socket Versions (Measurements in inches and millimeters).

For a visual overview of the product, you may refer to the product showcase video:

Video 1: WESA Wall Socket Product Showcase.

A detailed user manual in PDF format may also be available for further installation guidance. Please check the seller's product page for a link to the PDF document.

5. Operating Instructions

The WESA Wall Socket is designed for straightforward operation:

  1. Ensure the socket is correctly installed and power is supplied.
  2. Insert the plug of your appliance into the socket.
  3. Ensure the plug is fully inserted for a secure connection.
  4. To disconnect, firmly pull the plug straight out from the socket.
Firm shell and quality switch

Figure 4: The socket features a firm shell and quality switch for durability and impact resistance.

6. Maintenance

  • Cleaning: Disconnect power before cleaning. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture.
  • Inspection: Periodically inspect the socket for any signs of damage, loose connections, or discoloration. If any issues are found, turn off power and consult a qualified electrician.
  • No User-Serviceable Parts: There are no user-serviceable parts inside the socket. Do not attempt to disassemble it.

7. Troubleshooting

No Power from Socket:

  • Check the circuit breaker or fuse for the circuit. Reset the breaker or replace the fuse if tripped/blown.
  • Ensure the socket is correctly wired and all connections are secure. If unsure, consult a qualified electrician.
  • Test the appliance in another known working outlet to rule out appliance malfunction.

Loose Plug Connection:

  • Ensure the plug is fully inserted into the socket.
  • If the plug remains loose, the socket may be worn or damaged. Discontinue use and have it inspected or replaced by a qualified electrician.

8. Specifications

Feature Specification
Brand Name WESA
Model Number BZ-05-HUI
Rated Current 16A
Socket Type Socket 220V (EU Standard)
Installation Type Wall Embedded
Grounding Non-Grounding
Material Plastic
Application Residential / General-Purpose
Standard 105*51*35mm (for 2-socket version)
Certification CE, RoHS, WEEE

9. User Tips

  • Always ensure the plug is fully inserted to prevent arcing and ensure a stable connection.
  • Consider the total power consumption of devices plugged into a single socket to avoid overloading.

10. Warranty and Support

For warranty information and technical support, please refer to the terms provided by your retailer or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2024 WESA. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.