1. Product Overview
The Niditon 3D Digital Alarm Clock is a versatile LED clock designed for home, kitchen, or office use. It features a large digital display, multiple alarm settings, temperature display, and automatic brightness adjustment. It can be placed on a desk or mounted on a wall.

Figure 1: Niditon 3D Digital Alarm Clock (White Display)
Main Functions:
- LED Clock Display
- Display Time, Date, and Temperature by turn
- Temperature range: 0℃-50℃ (32°F-122°F)
- Automatic brightness adjustment (50% darker from 19:00-06:00)
- 3 sets of Alarms (AL1, AL2, AL3)
- Power: 1 x CR2032 for memory time, DC 5V via USB Cable
- Mounting options: On table (with removable bracket) / On wall (with hanging hole)

Figure 2: Key Features Overview
2. Setup
Package Contents:
- 1 x 3D Digital Alarm Clock
- 1 x USB Power Cable
- 1 x CR2032 Battery (for memory time)
- 1 x Removable Bracket
Power Connection:
- Insert the CR2032 battery into the battery compartment on the back of the clock. This battery is for time memory during power outages and does not power the display.
- Connect the provided USB cable to the DC 5V input port on the back of the clock.
- Plug the other end of the USB cable into a standard USB power adapter (not included) or a USB port on a computer/power bank.
Placement:
The clock can be placed on a flat surface or mounted on a wall.
- Desk Placement: Attach the removable bracket to the bottom of the clock for stable desk placement.
- Wall Mounting: Use the hanging hole on the back of the clock to mount it on a wall using a suitable screw (not included).

Figure 3: Hanging Hole and Removable Bracket
Initial Power On / Default Settings:
When the clock is first powered on or reconnected to power, the LED display will show the time with the following default settings:
- Default Year: 2015.01.01
- Default Time: PM 12:00 (12/24 Hour Format)
- Default Alarm Modes: AL1 AM 12:00, AL OFF; AL2 AM 12:00, AL OFF; AL3 AM 12:00, AL OFF
3. Operating Instructions
Buttons Introduction:

Figure 4: Clock Buttons
- SET Key:
- Under Time Mode: Press to cycle through Time-Date-Temperature-AL1-AL2-AL3 mode choice.
- Long Press: Enter adjustment mode for the current display.
- UP Key:
- Short Press: Adjust value upwards.
- Long Press: Fast adjustment.
- Under Alarm Mode: Short press to open/close alarm function.
- Under Non-Alarm/Non-Clock/Non-Setting Mode: Press to choose display mode (dp-1/dp-2/dp-3).
- DOWN Key:
- Short Press: Adjust value downwards.
- Long Press: Fast adjustment.
- In normal mode: Used to open/save power saving mode.
- RESET Key: Resets the clock to factory default settings.
Clock Function (Time Setting):
- In Time Display Mode, Long Press the SET key for 2 seconds to enter Clock Setting.
- Press UP/DOWN keys to adjust the hour. Long press for fast adjustment.
- Press SET again to move to minute adjustment. Adjust with UP/DOWN keys.
- Press SET again to choose 12/24Hr display format. Adjust with UP/DOWN keys.
- Press SET again to save and exit.
Date Function:
- In Date Display Mode (Month/Date), Long Press the SET key to enter Date Setting.
- Press UP/DOWN keys to adjust the year (range: 2000-2099). Long press for fast adjustment.
- Press SET again to move to month adjustment. Adjust with UP/DOWN keys.
- Press SET again to move to day adjustment. Adjust with UP/DOWN keys.
- Press SET again to save and exit.
Alarm Function:
The clock has 3 independent alarms: AL1, AL2, AL3.
- In Alarm Mode (AL1, AL2, or AL3), press the UP key to toggle the alarm ON/OFF.
- Long Press the SET key to enter Alarm Setting.
- Press UP/DOWN keys to adjust the hour. Long press for fast adjustment.
- Press SET again to move to minute adjustment. Adjust with UP/DOWN keys.
- Press SET again to save and exit.
- When an alarm rings, press any key to stop it. If no key is pressed, the alarm will ring for 1 minute with a "BIBI" sound.
Display Modes (dp-1, dp-2, dp-3):
Under Non-Alarm / Non-Clock / Non-Setting Mode, press the UP key to cycle through the display modes:
- DP-1 Mode: Displays Time, Date, and Temperature in exchange. Time is displayed for 10 seconds, then cycles to Date, then Temperature, and then back to Time.
- DP-2 Mode: Default display is Time. If you switch to another mode (Date or Temperature), it will stay on that mode.
- DP-3 Mode: Default display is Time. If you switch to another mode, it will revert to Time display mode after 15 seconds of no operation.
Automatic Brightness Adjustment:
The clock automatically adjusts its brightness:
- 70% Darker: From 7:00 PM to 5:59 AM.
- 100% Brightness: From 6:00 AM to 6:59 PM.
Voice Control:
In normal mode, the DOWN key is used to activate the power saving mode. The display will turn off 15 seconds later. When the ambient sound reaches 75 dB, the LED display will re-light for 15 seconds. Note that the sound control mode does not work when powered by button batteries only.
4. Maintenance
- Cleaning: Wipe the clock surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Power: Ensure the USB cable is securely connected. If the display is dim or flickering, check the power source.
- Battery: The CR2032 battery is for memory backup only. Replace it periodically (e.g., every 1-2 years) to ensure time and settings are retained during power interruptions.
- Environment: Avoid placing the clock in direct sunlight, extreme temperatures, or high humidity, as this may affect its performance and lifespan.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is off or dim. | Power saving mode active, power disconnected, or low power. | Press any button to exit power saving mode. Check USB power connection. Ensure the power adapter provides sufficient power. |
| Alarm does not sound. | Alarm is not set or is turned off. | Verify alarm settings (AL1, AL2, AL3) and ensure they are set to ON. |
| Time/Date resets after power loss. | CR2032 memory battery is dead or missing. | Replace the CR2032 battery. |
| Cannot adjust brightness manually. | Brightness is automatically adjusted. | The clock features automatic brightness adjustment based on time of day. Manual adjustment is not available. |
| Voice control not working. | Running on button battery only. | Voice control only functions when the clock is powered via USB. |
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | NIyw01 |
| Display Type | Digital LED |
| Motivity Type | Digital |
| Material | Plastic |
| Function | Temperature Display, Alarm, Time, Date, Auto Dimming, Time Memory |
| Temperature Range | 0℃-50℃ (32°F-122°F) |
| Dimensions (Length x Width) | 230mm (9 inches) x 94mm |
| Weight | 260g (Product), 221g (Package) |
| Power Source | DC 5V (via USB Cable), 1x CR2032 (for memory time) |
| Form | Single Face |
| Style | Modern Style, Geometric Shape |

Figure 5: Product Dimensions
7. User Tips
- Patience with Settings: The manual can be detailed. Take your time to understand each setting step-by-step, especially for time and alarm configurations.
- Brightness: Remember that the clock has an automatic dimming feature. If you find the display too dim at night, this is by design. There is no manual brightness adjustment.
- Power Source: For full functionality, including voice control, ensure the clock is powered via the USB cable, not just the CR2032 memory battery.
8. Warranty and Support
For detailed warranty information and customer support, please refer to the official product page or contact the seller directly. A comprehensive user manual in PDF format may also be available for download from the seller's website or via this link: Niditon 3D Digital Alarm Clock User Manual (PDF).