WESA EP-06-BM

Contents

WESA Wood Power Sockets AC 250V Wall Embedded Electrical Outlets User Manual

Model: EP-06-BM

1. Introduction

Thank you for choosing the WESA Wood Power Sockets. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new electrical outlets. Please read this manual thoroughly before installation and keep it for future reference.

These wall-embedded electrical outlets are designed for residential and general-purpose applications, featuring a classic EU standard design with a flame-retardant plastic construction and an aesthetic wood finish. They are rated for AC 250V and 16A, and include standard grounding for enhanced safety.

2. Safety Information

WARNING: Installation should only be performed by a qualified electrician in accordance with all local and national electrical codes. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Always turn off power at the circuit breaker or fuse box before installing, servicing, or cleaning the socket.
  • Do not install in wet or damp locations unless specifically rated for such environments.
  • Ensure all wiring connections are secure and properly insulated.
  • Do not exceed the rated current (16A) or voltage (AC 250V) of the socket.
  • This product is made from high-temperature flame-retardant material to prevent fire hazards.
Illustration of flame retardant material protecting against fire
High Temperature Flame Retardant Material: Designed to prevent fire hazards.

3. Installation

The WESA Wood Power Sockets are designed for wall-embedded installation. Refer to the dimension diagrams below to ensure proper fit and preparation of the wall box.

Detailed dimensions for 1-socket and 2-socket versions of the wall outlet
Dimensions for 1-Socket and 2-Socket configurations. Ensure your wall box matches these measurements.

Installation Steps:

  1. Turn Off Power: Locate the circuit breaker or fuse that controls the power to the installation area and turn it OFF. Verify power is off using a voltage tester.
  2. Prepare Wall Box: Ensure the wall box is clean and free of debris. The dimensions for the socket are provided in the diagram above.
  3. Connect Wiring: Connect the live (L), neutral (N), and ground (PE) wires to the corresponding terminals on the back of the socket. Ensure connections are tight and secure. The product video below shows the rear of the socket for reference.
  4. Mount the Socket: Carefully insert the wired socket into the wall box. Secure it using the mounting screws provided.
  5. Attach Faceplate: Place the wood-finish faceplate over the socket and secure it.
  6. Restore Power: Turn the power back ON at the circuit breaker or fuse box.
  7. Test: Test the socket with a known working appliance to ensure proper functionality.
Product rotation video, showing the front and back of the socket, useful for understanding the mounting mechanism and wiring terminals.

4. Operation

The WESA Wood Power Sockets are designed for straightforward operation. Once properly installed and powered, simply insert your EU standard plug into the socket to draw power. The sockets are suitable for residential and general-purpose electrical appliances within the specified voltage and current limits.

WESA Wood Power Socket with wood grain finish and multiple color options
The WESA Wood Power Socket, available in various wood grain finishes.

5. Maintenance

To ensure the longevity and safe operation of your WESA Wood Power Sockets, follow these simple maintenance guidelines:

  • Cleaning: Disconnect power before cleaning. Wipe the surface with a soft, dry cloth. For stubborn marks, use a slightly damp cloth with mild soap, then dry thoroughly. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic and wood finish.
  • Inspection: Periodically inspect the socket for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is found, turn off the power and have the socket inspected and replaced by a qualified electrician.
  • Environmental Conditions: Avoid exposing the socket to extreme temperatures or high humidity, which can affect its performance and lifespan.

6. Troubleshooting

If you encounter issues with your WESA Wood Power Socket, consider the following troubleshooting steps:

  • No Power:
    • Check the circuit breaker or fuse for the affected circuit. Reset the breaker or replace the fuse if tripped/blown.
    • Ensure the appliance you are trying to power is working correctly by testing it in another known working outlet.
    • If the issue persists, there may be a wiring problem. Turn off power and consult a qualified electrician.
  • Loose Plug: If a plug feels loose in the socket, it may indicate wear or damage. Discontinue use and have the socket replaced by a qualified electrician.
  • Overheating: If the socket feels warm to the touch, immediately unplug any devices and turn off power. Overheating can be a sign of an overloaded circuit or faulty wiring. Consult a qualified electrician.

Do not attempt to repair the socket yourself if you are not qualified. Always prioritize safety.

7. Specifications

Feature Specification
Model Number EP-06-BM
Brand Name WESA
Rated Current 16A
Voltage AC 250V
Material Plastic (Flame Retardant)
Installation Type Wall Embedded
Grounding Standard Grounding
Number of Slots 1 or 2 (variant dependent)
Socket Type EU Standard (Socket 220V)
Application Residential / General-Purpose
Standard Dimensions (2-socket) 115mm x 82mm x 40mm (approx.)
Backlight/Indication Not present
Extension Cable Length None
Shape Rectangular
Origin Mainland China
Certification CE, RoHS, WEEE
Package Weight 0.092 kg
Package Dimensions 10cm (L) x 9cm (W) x 5cm (H)

8. User Tips

  • Aesthetic Integration: The natural wood colors and delicate hand feel of these sockets make them a stylish addition to any room. Consider matching them with existing wood finishes for a cohesive look.
  • Durability: The firm shell and quality construction provide anti-drop and impact resistance, ensuring long-term durability in daily use.
  • Professional Installation: For optimal safety and performance, always have electrical outlets installed by a certified professional.
Illustration of the socket's firm shell and impact resistance
Firm shell and quality switch design provide anti-drop and impact resistance.

9. Warranty and Support

WESA products are manufactured to high standards and are certified with CE, RoHS, and WEEE, ensuring compliance with European safety, health, and environmental protection requirements.

For detailed warranty information or technical support, please refer to the official product documentation or contact your retailer. A comprehensive user manual in PDF format is also available for download: Download User Manual (PDF).

© 2024 WESA. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.