Introduction
Thank you for purchasing the Magcubic HY450 Projector. This manual provides detailed instructions for setting up, operating, and maintaining your projector to ensure optimal performance and longevity. Please read it carefully before use and keep it for future reference.
The Magcubic HY450 is a high-performance digital projector designed for a cinema-like viewing experience. It features 900 ANSI lumens brightness, 8K/4K/1080p support, ultra-short throw capabilities, auto offset, electronic focus, and integrated voice assistant. Powered by an Allwinner H716 chip, it offers fast and stable connectivity with WiFi 6 and Bluetooth 5.4.

Image: Magcubic HY450 Projector highlighting 900 ANSI, Auto Offset, WiFi 6, BT5.4, Electronic Focus, and 8K/4K/1080p support.
Important Safety Instructions
Please observe the following safety guidelines to prevent damage to the projector and ensure user safety:
- The projector is not dustproof or waterproof. Do not expose it to rain or fog to reduce the risk of fire and electric shock.
- Always use the original power adapter provided with the projector. Ensure the projector operates under the specified rated power supply.
- When the projector is operating, do not look directly into the lens. The strong light can cause eye strain or slight pain. Children should use the projector under adult supervision.
- Do not cover the projector's vents. Obstructed vents can lead to overheating, reducing the projector's lifespan and posing a safety hazard.
- Regularly clean the projector vents to prevent cooling malfunctions caused by dust accumulation.
- Avoid using the projector in greasy, damp, dusty, or smoky environments. Oil or chemicals can cause malfunctions.
- Handle the projector with care during daily use.
- If the projector will not be used for a long time, disconnect it from the power source.
- Unauthorized disassembly of the projector for testing or maintenance by non-professionals is strictly forbidden.
- Do not bend or drag the power cord. Do not place the power cord under the projector or any heavy objects.
- Do not cover the power cord with other soft materials.
- Avoid heating the power cord.
- Do not touch the power adapter with wet hands.
Product Overview
Projector Structure
The projector features a lens at the front, vents on the sides, and various ports for connectivity.

Image: Front-side view of the Magcubic HY450 Projector.
Ports and Controls:
Refer to the diagram below for the location of ports and controls on the projector and remote.

Image: Diagram showing the projector's headset jack, USB port, HDMI port, power input, vents, and lens. Also, a detailed layout of the BT Air Remote with buttons for ON/OFF, MUTE, Directions, OK, VOICE INPUT, RETURN, MENU, VOL+/-, and ELECTRONIC FOCUS.
- Headset Jack: For audio output.
- USB: For connecting USB storage devices.
- HDMI™: For connecting external video sources.
- ON/OFF Button: Power on/off the projector.
- Vent: Air circulation for cooling.
- Lens: Projection lens.
- Air Inlet: Air intake for cooling.
Setup Guide
1. Physical Placement
Place the projector on a stable, flat surface. Ensure there is adequate space around the vents for proper airflow.

Image: Diagram illustrating projection distances for various screen sizes: 0.9 meters for a 75-inch screen, 1.2 meters for a 100-inch screen, and 2.2 meters for a 150-inch screen. The projector has a 0.6:1 Ultra Short Throw Ratio.
2. Power Connection
Connect the original power adapter to the projector's power input port and then plug it into a power outlet.
3. Initial Setup
- Power On: Press the ON/OFF button on the projector or remote control to power on the device.
- Bluetooth Remote Controller Pairing:
- From the boot interface, press the "Voice input" button on the Bluetooth remote control.
- Follow the on-screen guide to pair the remote.
- Language Selection:
- Navigate to Settings > Language and keyboard.
- Select your preferred language from the list.
- Networking Setup (Wi-Fi):
- Go to Settings > Networking Setting.
- Turn Wi-Fi "ON".
- Select your desired Wi-Fi network ID from the list.
- Enter the password to connect to the internet.

Image: Comparison showing WiFi 6 technology providing faster and more stable transmission compared to WiFi 5.
- HDMI™ Signal Input:
- Connect your external device (e.g., Blu-ray player, game console) to the projector's HDMI port.
- Navigate to the HDMI input source from the projector's menu.
Operating Instructions
1. Basic Navigation and Control
Use the directional buttons (UP, DOWN, LEFT, RIGHT) and OK button on the remote control to navigate through menus and make selections. The VOICE INPUT button activates the voice assistant for simplified control.

Image: Google Voice Remote control, demonstrating voice command functionality for quick access to apps and content.
2. Projection Settings
Access the Projection settings menu to adjust various display parameters:
- Projection Mode: Adjust how the image is projected (e.g., front, rear, ceiling).
- Installation Mode: Configure for different mounting positions.
- Digital Scaling: Adjust the size of the projected image.
- Manual Trapezoidal: Correct keystone distortion manually.
- Auto Correction: The projector supports automatic keystone correction.
3. App Store
The built-in App Store allows you to install various applications directly onto the projector. Applications can be used immediately after installation.
4. Wireless Screen (Screen Mirroring)
To mirror content from your Android device (phone, tablet, etc.) to the projector:
- Ensure your Android device and the projector are connected to the same local wireless LAN.
- On the projector, navigate to the Home Screen > My Apps > ScreenCast.
- Open the ScreenCast service.
- On your Android device, enable screen mirroring/casting and connect to the projector.
5. Date and Time Setting
Go to Settings > Date And Time Setting to set the current date, time, and choose between 12-hour or 24-hour format.
6. Screen Saver
The projector can enter screen saver mode after a set period of inactivity or playback. To configure, go to Settings > Other Setting > Screen saver. The screen saver can be dismissed by pressing the power button on the remote.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your Magcubic HY450 Projector.
Cleaning
- Vents: Regularly clean the projector's vents to prevent dust accumulation, which can hinder cooling performance. Use a soft brush or compressed air to gently remove dust.
- Lens: Use a soft, lint-free cloth specifically designed for optical lenses to clean the projector lens. Avoid abrasive materials or harsh chemicals.
- Exterior: Wipe the exterior surfaces with a soft, dry cloth. Do not use liquid cleaners directly on the projector.
Storage
If the projector will not be used for an extended period, disconnect it from the power source and store it in a cool, dry, and dust-free environment. Use the original packaging or a protective case to prevent damage.
Troubleshooting
This section addresses common issues you might encounter with your Magcubic HY450 Projector.
Common Issues and Solutions
- No Power:
- Ensure the power adapter is securely connected to both the projector and a working power outlet.
- Verify that the power outlet is functional.
- No Image/Signal:
- Check if the correct input source (e.g., HDMI) is selected in the projector's menu.
- Ensure the external device (e.g., laptop, game console) is powered on and sending a signal.
- Verify that the HDMI cable is securely connected to both the projector and the source device.
- Flickering Screen / Display Issues:
- Check all cable connections for looseness or damage.
- Try restarting the projector and the source device.
- If the issue persists, a factory reset might resolve software-related display glitches. (See 'Factory Reset' below).
- Remote Control Not Responding:
- Ensure the remote control's batteries are not depleted.
- Re-pair the Bluetooth remote control as described in the 'Setup Guide' section.
- Overheating Warning:
- Ensure the projector's vents are not blocked and have adequate airflow.
- Clean any dust from the vents.
- Operate the projector in a well-ventilated area.
Factory Reset
If you experience persistent issues that cannot be resolved through basic troubleshooting, a factory reset may be necessary. This will restore the projector to its original factory settings, erasing all personal data and installed applications.
- Navigate to Settings > Other settings > Restore factory settings.
- Confirm the reset when prompted.
Note: Performing a factory reset will erase all user data and settings. Back up any important information before proceeding.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Magcubic |
| Model | HY450 |
| Category | Projectors |
| Type | Digital Projector |
| Use | Cinema Projector, Home Theater Projector |
| System | ANDROID |
| CPU | Quad-core ARM Cortex-A53 (Allwinner H716 Chip) |
| GPU | Mali-G31 (Allwinner H716 Chip) |
| RAM | 2GB |
| ROM | 32GB |
| Ansi Lumens | 900 |
| Brightness | 900ansi |
| Contrast Ratio | 26000:1 |
| Projection Technology | LCD |
| Projected Dimension | 20-300 inches |
| Projection Distance | 0.55m-2.1m |
| Projective Mode | T4 |
| Screen Scale | 16:09 |
| Keystone Correction | Auto Correction |
| Light Source | Led Light |
| Power Source | AC |
| Built-in Speaker | Yes |
| Bluetooth-compatible | Yes (BT5.4) |
| Wi-Fi | WiFi 6 |
| Remote controller included | Yes |
| Inbox adaptor | Yes |
| Weight | 2.8kg |
| Certification | CE |
Image: Detailed view of the Allwinner H716 Chip, specifying CPU (Quad-core ARM Cortex-A53), GPU (Mali-G31), RAM (2GB), and ROM (32GB).

User Tips
- Screen Flickering: If you experience screen flickering or unusual colors, first check all cable connections (HDMI, power). Try restarting the projector. If the issue persists, consider performing a factory reset as described in the Troubleshooting section.
- Optimal Viewing: For the best experience, ensure your projection surface is smooth and white. Adjust the projection distance and keystone correction for a clear, rectangular image.
- Voice Control: Utilize the voice assistant feature on the remote for quick access to apps and content, enhancing ease of use.
Warranty and Support
For any assistance, technical support, or warranty inquiries, please contact Magcubic customer support.
- Support Email: support@magcubic.com
When contacting support, please provide your product model (HY450) and a detailed description of the issue you are experiencing.
A detailed user manual in PDF format is available for download. You can access it via the following link: Magcubic HY450 User Manual (PDF)
This manual is for reference only. Product specifications and functions are subject to change without prior notice as part of continuous product improvement. Magcubic reserves the right of final interpretation.