M5Stack C008-C

Contents

M5Stack ATOM Echo Smart Speaker User Manual

Model: C008-C

1. Introduction

The M5Stack ATOM Echo is a programmable smart speaker based on the ATOM design, featuring a compact size of only 24 x 24 x 17mm. It integrates an ESP32 chip with built-in Wi-Fi and Bluetooth capabilities, allowing it to connect to mobile phones, tablets, and other devices for music playback or streaming media via Wi-Fi. The ATOM Echo supports Speech-to-Text (STT) services for voice control and IoT functions. It includes a built-in microphone, speaker, and an RGB LED (SK6812) to indicate connection status. The device also retains the control capabilities of the ATOM series, offering a GROVE interface for connecting external devices and an M2 screw hole for easy mounting.

ATOM Echo Application Scenarios

Figure 1: ATOM Echo Application Scenarios (Bluetooth Speaker, IoT Node, Voice Control)

2. Setup

2.1. Device Overview

ATOM Echo Device Overview

Figure 2: ATOM Echo Device Components

  • M2-SCREW HOLE: For mounting the device.
  • I2S.Pin: Not available for user access.
  • USB-C: For power and data connection.
  • Ext.Pin: Available for external connections.
  • Button (G39): Programmable button, often used for interaction.
  • RGB-LED: Multi-color LED for status indication.
  • ESP32 PICO: The main microcontroller.
  • IR-LED: Infrared LED.
  • Reset: Reset button.
  • PH2.0-4P: GROVE expansion interface.

2.2. Connecting to a Computer

To program or update the firmware on your ATOM Echo, connect it to your computer using a USB-C cable. Ensure you have the necessary drivers installed.

2.3. Driver Installation

For Windows 10 users, connect the device to your PC and open Device Manager to install the FTDI driver. Download the driver file that matches your operating system, extract it, and install it via Device Manager (custom update). In some system environments, the driver may need to be installed twice. If the device name appears as 'M5Stack' or 'USB Serial', use the driver file directly in Device Manager for installation.

For MacOS users, before installation, navigate to System Preferences -> Security & Privacy -> General, and ensure 'Allow apps downloaded from: App Store and identified developers' is enabled.

2.4. Programming Platforms

The ATOM Echo can be programmed using:

  • Arduino IDE: For C++ based programming.
  • ESP-IDF: Espressif IoT Development Framework.
  • UiFlow: A block-based visual programming platform (for STT recognition results).

Refer to the official M5Stack documentation for detailed tutorials on connecting ATOM Echo to Home Assistant, programming with Arduino IDE, or obtaining STT recognition results via UiFlow. A user manual PDF is available for more in-depth guides: ATOM Echo User Manual (PDF).

3. Operating Instructions

3.1. Basic Functions

Video 1: ATOM Echo Product Demonstration (Recording, Playback, Voice Interaction)

  • Recording: Press and hold the main button, speak into the microphone, then release the button to stop recording.
  • Playback: The device can play back recorded audio or stream audio via Bluetooth/Wi-Fi.
  • Voice Interactive (AI): Press the main button to activate voice command mode, speak your command, and the device will process it.

3.2. Wireless Speaker Mode

The ATOM Echo uses the A2DP protocol for audio transmission. When powered on, the RGB LED will display red. When successfully connected to a wireless device (e.g., via Bluetooth), the LED will turn green, indicating that audio can be output through the speaker. Upon disconnection, the LED will return to red.

3.3. Pin Usage Precautions

  • GPIO pins G19, G22, G23, and G33 are predefined for specific functions. Do not attempt to multiplex these pins, as it may cause damage to the ATOM Echo device.

3.4. Playback Precautions

To prevent potential damage to the ATOM Echo's speaker or audio components, avoid the following operations:

  • Using the I2S channel to output DC signals.
  • Playing white noise for extended periods.
  • Playing full-amplitude square wave audio.

4. Maintenance

The M5Stack ATOM Echo is a robust device, but proper care ensures its longevity:

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Do not immerse the device in water or other liquids.
  • Handle the USB-C port and GROVE interface gently to prevent damage.

5. Troubleshooting

5.1. Device Not Responding

  • Ensure the device is properly powered via the USB-C port.
  • Press the 'Reset' button to restart the device.
  • If programming, ensure the correct baud rate is selected.

5.2. Programming/Firmware Upload Issues

  • Baud Rate Limit: When performing program download operations, it is recommended to select one of the following serial port baud rate options: 1500000 bps, 750000 bps, 500000 bps, 250000 bps, or 115200 bps. Using other speeds may prevent the program from being downloaded properly.
  • Driver Issues: Ensure the FTDI driver is correctly installed. If the device is not recognized or appears as 'M5Stack' or 'USB Serial', try reinstalling the driver or installing it twice.

5.3. Audio Playback Problems

  • Check the volume settings on the connected device.
  • Ensure the ATOM Echo is properly connected via Bluetooth or Wi-Fi (LED should be green).
  • Avoid playback operations listed in the 'Playback Precautions' section (Section 3.4).

6. Specifications

ATOM Echo Dimensions

Figure 3: ATOM Echo Dimensions

Specification Parameters
SoC ESP32-PICO-D4, 240MHz, Dual Core, Wi-Fi
Flash 4MB
Interface 1 x IR-TX, 1 x Button, 1 x Reset Button
PinOut G21/G25/5V/GND, 3V3/G22/G19/G23/G33
RGB LED SK6812
SPEAKER 0.8W/NS4168 I2S
MIC SPM1423 PDM
Housing Material Plastic (PC)
Product Weight 5g
Gross Weight 10g
Product Size 24 x 24 x 17mm
Package Size 85 x 65 x 17mm

6.1. Pin Map Details

SPK & MIC Connections:

  • NS4168 (Speaker Amplifier): SADTA (AMP DATA) to G22, BCLK (AMP BCLK) to G19, LRCK (AMP LRCK) to G33.
  • SPM1423 (Microphone): CLK (MIC CLK) to G23, DATA (MIC DATA) to G23.

HMI (Human Machine Interface) Connections:

  • RGB LED: Data connected to G27.
  • Button: Input connected to G39.

HY2.0-4P (GROVE) Interface:

  • Black: GND
  • Red: 5V
  • Yellow: G26
  • White: G32

7. User Tips

No specific user tips were available from the provided data (reviews or Q&A). For best performance, ensure your firmware is up-to-date and refer to the M5Stack community forums for shared experiences and projects.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or the official M5Stack support channels. Keep your proof of purchase for any warranty claims.

© 2024 M5Stack. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.