1. Important Safety Instructions
Please read this manual carefully before use and keep it for future reference. Failure to follow these instructions may result in fire, electric shock, or other injuries.
- The projector is not dustproof or waterproof. Do not expose it to rain or fog.
- Use only the original power adapter. The projector should operate under its specified rated power supply.
- When the projector is operating, do not look directly into the lens. The strong light can cause eye strain or discomfort. Children should use the projector under adult supervision.
- Do not cover the projector's vents. Proper ventilation is crucial to prevent overheating and prolong the projector's lifespan.
- Regularly clean the projector vents to prevent dust accumulation, which can lead to cooling malfunctions.
- Avoid using the projector in greasy, damp, dusty, or smoky environments. Oil or chemicals can cause malfunctions.
- Handle the projector with care during daily use.
- Disconnect the power if the projector will not be used for an extended period.
- Do not attempt to disassemble the projector for testing or maintenance unless you are a qualified professional.
2. Product Overview
The Magcubic HY450 is a high-performance projector designed for home theater use, offering a vivid and immersive viewing experience.

Image 1: Magcubic HY450 Projector showcasing 8K/4K/1080P support, Auto Offset, 900 ANSI, 0.6:1 Ultra Short Throw, and Electronic Focus.
Package Contents
- Magcubic HY450 Projector
- Remote Control
- Power Adapter
- Quick Installation Guide (Refer to this manual for detailed instructions)
Component Identification

Image 2: Projector structure description showing headset jack, USB port, ON/OFF button, HDMI port, vents, power input, lens, and air inlet.
- Headset Jack: For external audio output.
- USB Port: For connecting USB storage devices.
- ON/OFF Button: Power on/off the projector.
- HDMI™ Port: For connecting external video sources (e.g., laptop, game console).
- Vents: For heat dissipation (do not block).
- Power Input: Connect the power adapter here.
- Lens: Projection lens.
- Air Inlet: Air intake for cooling.
3. Setup
3.1 Initial Power On
- Connect the power adapter to the projector's power input port and then to a power outlet.
- Press the ON/OFF button on the projector or the remote control to power on the device.
- The projector will boot up and display the main interface.
3.2 Remote Control Pairing
The remote control uses Bluetooth for connection. Follow these steps to pair it:
- Ensure the projector is powered on.
- On the projector's boot interface, press the