Introduction
The M5Stack M5StickC PLUS2 is a compact, versatile IoT development board based on the ESP32-PICO-V3-02 chip. It features a 1.14-inch TFT color screen, a 6-axis IMU, RTC, infrared transmitter, and a digital microphone, making it suitable for a wide range of IoT applications, wearable devices, and educational projects. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your M5StickC PLUS2 device.
Video: Overview of M5StickC PLUS2 features and capabilities.
Product Overview
The M5StickC PLUS2 is an upgraded version of the M5StickC Plus, offering enhanced resources and capabilities. Below is a detailed diagram highlighting its key components and interfaces.

Image: M5StickC PLUS2 component diagram, showing buttons (A, B, C), USB-C port, HY2.0-4P port, Ext. 8-Pin, IR, LED, MIC, Buzzer, and internal components like ESP32-PICO, Flash, PSRAM, IMU, RTC, and Battery.
Key Features:
- Display: 1.14-inch TFT ColorLCD (135x240 resolution)
- Microcontroller: ESP32-PICO-V3-02
- Memory: 8MB Flash, 2MB PSRAM
- Sensors: MPU6886 6-axis IMU (for real-time posture monitoring), SPM1423 digital microphone
- Timekeeping: Built-in BM8563 RTC chip for precise timekeeping and low-power timing wake-up
- Communication: Integrated infrared emitter (IR G19) for easy control of home appliances
- Connectivity: USB-C (charging/programming), HY2.0-4P, Ext. 8-Pin @2.54mm (for DuPont wire testing and M5Stack HAT compatibility)
- Power: 200mAh battery
- User Interface: Programmable Buttons (A, B), Power Switch Button (C)
Setup Instructions
1. Initial Firmware Flashing and Driver Installation
The M5StickC PLUS2 is an open-source development board. If you encounter issues such as a black screen or failure to boot, it is often due to incorrect firmware or missing drivers. Re-flashing the official factory firmware is the recommended solution.
- Download M5Burner: Obtain the M5Burner firmware flashing tool from the official M5Stack documentation.
- Install USB Drivers: Download and install the appropriate USB drivers for your operating system.
- Windows (CH9102 version): CH9102_VCP_SER_Windows.exe
- MacOS (CH9102 version): CH9102_VCP_SER_MacOS_v1.7.zip
- If you experience program download issues (e.g., timeout, "Failed to write to target RAM" errors), reinstall the device driver.
- Connect Device: Connect your M5StickC PLUS2 to your computer using a USB-C cable.
- Select Port (MacOS): On MacOS, ensure you select the port named "wchmodem" if multiple ports are available.
- Download Firmware in M5Burner:
- Open M5Burner.
- Search for and select the "M5StickCPlus2 UserDemo" official firmware.
- Burn Firmware: Click the "Burn" button in M5Burner to start the flashing process.

Image: M5StickC PLUS2 with a black screen, often resolved by re-flashing firmware.
Important: Always use official firmware. Unofficial firmware can void your warranty, cause instability, and expose your device to security risks.
2. Power Control and Supply
- USB Power: When powered via USB, the device will remain turned on.
- Battery Power: When using the built-in battery, you may need to configure the power hold (G4) pin to a high level at the beginning of your program. Otherwise, the device might shut down automatically.
Operating Instructions
Buttons and Interfaces:
- Button A & B: Programmable buttons for custom functions.
- Button C (Power Switch): Press and hold for 6 seconds to power off the device.
- USB-C (CHG/PROG): Used for charging the device and programming/flashing firmware.
- HY2.0-4P: General purpose port for connecting peripherals.
- Ext. 8-Pin @2.54mm: Can be used for DuPont wire connection testing and is compatible with M5Stack HAT series products for plug-and-play convenience.
Special Features:
- Real-time Posture Monitoring: The MPU6886 6-axis IMU allows for real-time tracking of the device's orientation and motion.
- Precise Timekeeping: The BM8563 RTC chip ensures accurate timekeeping and supports low-power timing wake-up functions.
- Digital Microphone: The SPM1423 digital microphone enables audio input and processing.
- Infrared Control: The integrated IR transmitter (G19) allows for controlling various home appliances. Note that the IR emitter and the red LED share the same IO (G19), which may cause a flickering effect when emitting IR signals.
- Green LED Indicator: The green LED is not GPIO controllable. It serves as an indicator for the long-press shutdown state. A continuously lit green LED indicates a successful shutdown, after which you can release the power button.
Power Consumption Monitoring:
To monitor the battery voltage status of your M5StickC PLUS2, you need to use the ADC PIN (G38) in your program.
Maintenance
- General Care: Keep the device clean and dry. Avoid exposure to extreme temperatures, humidity, or direct sunlight.
- Battery Care: To prolong battery life, avoid fully discharging the device frequently. Store the device with a partial charge if not used for extended periods.
- Firmware Updates: Regularly check the official M5Stack website for firmware updates to ensure optimal performance and access to new features. Follow the flashing instructions in the Setup section.
- Cleaning: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive materials.
Troubleshooting
Common Issues and Solutions:
- Q1: My M5StickC PLUS2 has a black screen or won't boot.
A1: This is a common issue with open-source development boards, often due to incorrect or corrupted firmware. The solution is to re-flash the official factory firmware using M5Burner. Refer to the "Initial Firmware Flashing and Driver Installation" section for detailed steps.
- Q2: The device's working time is only about 3 hours, or it shows 100% charge in 1 minute and then turns off when the charging cable is removed.
A2: This behavior is typically caused by using unofficial firmware (e.g., "Bruce for StickC plus2"). Unofficial firmware can lead to instability, incorrect power management, and may void your warranty. It is strongly recommended to flash back to the official firmware. Follow the instructions in the "Initial Firmware Flashing and Driver Installation" section to install the official firmware.

Image: M5StickC PLUS2 displaying a WiFi screen, which might be indicative of unofficial firmware causing power issues.
Specifications
M5StickC PLUS2 vs. M5StickC Plus Comparison:
| Resource | M5StickC Plus | M5StickC PLUS2 |
|---|---|---|
| FLASH | 4MB | 8MB |
| PSRAM | / | 2MB |
| USB-Chip | CH552 | CH9102 |
| Battery | 120mAh | 200mAh |
| PMIC | AXP192 | Timer Power |
| Color | Orange Red | Yellow |
Image: Comparison table of M5StickC Plus and M5StickC PLUS2 specifications.
General Specifications:
- Display Resolution: 135x240 pixels
- Microcontroller: ESP32-PICO-V3-02
- IMU: MPU6886 (6-axis)
- Real-Time Clock: BM8563
- Microphone: SPM1423-PDM MIC
- Infrared: IR Transmitter (G19)
- LED: G19
- Buzzer: Integrated
- Ports: USB-C, HY2.0-4P, Ext. 8-Pin
- Battery Capacity: 200mAh
- Product Weight: Approximately 0.028 kg
- Package Dimensions: 11 cm (Length) x 8 cm (Width) x 2 cm (Height)
User Tips
- Firmware is Key: Given its open-source nature, always ensure you are running the official M5Stack firmware for stability and proper functionality. Unofficial firmware can lead to unexpected issues, including power problems and voided warranty.
- Explore Accessories: The M5StickC PLUS2 is highly versatile. If you're interested in specific form factors like a watch, check the seller's listings for available watch kits or compatible accessories.
- Community Support: M5Stack has an active community. For advanced projects or specific programming questions, consulting community forums can be very helpful.
Warranty and Support
For warranty claims and technical support, please refer to the official M5Stack documentation and support channels. Using official firmware is crucial for maintaining warranty validity and receiving proper support.
A detailed user manual in PDF format is also available for download: M5StickC PLUS2 User Manual (PDF)
For further information and tutorials, visit the official M5Stack documentation website.