Introduction
Thank you for choosing the Joyroom JR-CB8 Bluetooth 5.4 Car Adapter AUX Receiver. This device is designed to upgrade your car's audio system with wireless Bluetooth connectivity, enabling hands-free calling and high-quality music streaming. Featuring enhanced dual microphones and CVC noise cancellation, it ensures clear communication on the go. Please read this manual carefully to ensure proper use and maintenance of your device.
Key Features:
- Bluetooth 5.4 for stable and fast connection
- Enhanced Dual Microphones with 2024 upgrade CVC noise cancellation for clearer calls
- Deep Bass & Hi-Fi Stereo audio experience
- Dual connection support for simultaneous device pairing
- Easy to use controls for volume, track, and calls
Package Contents
Please check the package for the following items:
- 1 x Joyroom JR-CB8 Bluetooth 5.4 Car Adapter AUX Receiver
- 1 x Type-C Charging Cable (approx. 54cm)
- 1 x 3.5mm AUX Audio Cable (approx. 93cm)
- 1 x 3M Adhesive Patch
- 1 x User Manual (this document)
Product Diagram
Familiarize yourself with the device's components and controls:
Setup Instructions
1. Initial Connection to Car Audio System
- Plug the 3.5mm AUX audio adapter (if using the short adapter) or the 3.5mm AUX audio cable into the 3.5mm AUX audio port on the JR-CB8 receiver.
- Plug the other end of the 3.5mm AUX audio adapter/cable into your car's 3.5mm AUX audio input port.
- Adjust your car's audio system to the AUX input mode.
2. Powering On and Bluetooth Pairing
- Press and hold the Power button (central button with phone icon) on the JR-CB8 for 2 seconds to turn it on manually. The indicator light will flash, indicating it's in pairing mode.
- On your mobile device (smartphone, tablet), go to the Bluetooth settings.
- Enable Bluetooth and search for available devices.
- Select "JR-CB8" from the list to connect. Once connected, the indicator light will remain steady.
3. Mounting the Device (Optional)
- Peel off the protective film from the provided 3M adhesive patch.
- Attach the adhesive patch to a clean, flat surface in your car's dashboard or console.
- Mount the JR-CB8 receiver onto the adhesive patch for secure placement.
Operating Instructions
Music Playback
- Volume Up: Press the '+' button.
- Volume Down: Press the '-' button.
- Next Track: Press the '▶▶' button.
- Previous Track: Press the '◀◀' button.
- Play/Pause: Press the central Power/Phone button.
Hands-Free Calling
- Answer/End Call: Click the central Power/Phone button.
Bass Boost
- Activate/Deactivate Bass: Use the 'BASS switch' (ON/OFF) located on the side of the device.
Light Control
- Turn On/Off Light: Long press the central Power/Phone button to toggle the backlight.
Other Uses
The JR-CB8 can also be used to add Bluetooth functionality to other audio devices:
- Speakers: Connect the JR-CB8 to a speaker with a 3.5mm AUX input.
- Wired Headphones: Connect the JR-CB8 to wired headphones with a 3.5mm AUX input to make them wireless.
Product Demonstration Video
Watch this video for a visual guide on setting up and using your Joyroom JR-CB8:
Maintenance
To ensure the longevity and optimal performance of your JR-CB8, please follow these maintenance guidelines:
- Keep Dry: Avoid exposing the device to water, moisture, or rain.
- Clean Gently: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive cleaners.
- Avoid Extreme Temperatures: Do not store or operate the device in extremely hot or cold environments.
- Handle with Care: Avoid dropping or subjecting the device to strong impacts.
- Do Not Disassemble: Do not attempt to disassemble, repair, or modify the device yourself. This will void the warranty and may cause damage.
Troubleshooting
If you encounter any issues with your JR-CB8, please refer to the following common problems and solutions:
-
Device does not power on:
- Ensure the device is sufficiently charged. Connect it to a power source using the Type-C charging cable.
- Press and hold the Power button for at least 2 seconds.
-
Unable to connect via Bluetooth:
- Make sure the JR-CB8 is powered on and its indicator light is flashing (pairing mode).
- Ensure Bluetooth is enabled on your mobile device.
- Check if the JR-CB8 is already connected to another device. Disconnect it from any other devices.
- Try forgetting "JR-CB8" from your device's Bluetooth list and re-pairing.
- Ensure your device is within the Bluetooth range (typically 10 meters/33 feet).
-
No audio output from car speakers:
- Verify that your car's audio system is set to the correct AUX input mode.
- Ensure the 3.5mm AUX audio adapter/cable is securely connected to both the JR-CB8 and your car's AUX port.
- Adjust the volume on both the JR-CB8 and your car stereo/connected mobile device.
-
Poor call quality or excessive background noise:
- Ensure the dual microphones on the JR-CB8 are not obstructed.
- The device features CVC noise cancellation, but extreme noise environments may still affect clarity.
Specifications
| Feature | Detail |
|---|---|
| Model Number | JR-CB8 |
| Brand Name | Joyroom |
| Wireless Type | Bluetooth 5.4 |
| Interface | Type-C (for charging) |
| Content | AUDIO |
| Support Memory Card | No |
| Support Apt-x | No |
| High Definition Support | None |
| Hign-concerned Chemical | None |
| Certification | CE |
| Origin | Mainland China |
| Package | Yes |
User Tips
- For optimal audio quality, ensure your car's audio system is set to AUX mode and adjust volume levels on both the receiver and your connected device.
- The device is designed to automatically reconnect to the last paired device when powered on and within range, making it convenient for regular use.
- Utilize the BASS switch for an enhanced audio experience, especially for music genres that benefit from deeper bass.
Warranty and Support
Joyroom products are manufactured to the highest quality standards. For detailed warranty information, technical support, or service inquiries, please refer to the official Joyroom website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
A user manual in PDF format is also available for download: View User Manual (PDF)