1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your ludengchaoshi XG-Ceiling Fan with Lights. Please read this manual thoroughly before installation and use, and keep it for future reference.
Important Safety Warnings
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been supervised or instructed on its use.
- Children should be supervised to ensure they do not play with the appliance.
- To reduce the risk of electric shock, ensure the supply line is connected between the fan and an all-pole disconnect switch with a minimum 3mm opening distance between contacts. If you lack electrical knowledge, please consult a professional electrician.
- Always turn off the power before installing or removing the ceiling fan. Ensure proper grounding.
- Do not use non-local governors or switch products.
- Ensure all screws are securely latched during installation.
- The rotating blades should not touch any object to avoid danger.
- Install the ceiling fan in an appropriate location, ensuring the fan blades are at least 2.3 meters (7.5 feet) above the ground to prevent accidental collision.
- If unusual oscillating movement is observed, immediately stop using the ceiling fan and contact the manufacturer or a suitably qualified service agent.
- Replacement of parts of the safety suspension system device must be performed by the manufacturer or its service agent.
- If it is necessary to replace the live or neutral brushes to ensure motor operation, both brushes and the earth brush must be replaced simultaneously by a suitably qualified person.
2. Package Contents
Carefully unpack the ceiling fan and check the contents against the list below. If any parts are missing or damaged, please contact customer service.
Video: Unboxing and overview of the ceiling fan components, including blades, motor, light kit, remote control, and mounting hardware.
Parts List (Figure 1)
| No. | Part Name |
|---|---|
| 1 | Ceiling fan body (including motor, housing, switch boxes) |
| 2 | Hanger |
| 3 | Bell |
| 4 | Hanging tube assembly |
| 5 | Glass shade |
| 6 | Leaf frame |
| 7 | Splice closure |
| 8 | Lamp units |
| 9 | Blade |
| 10 | Parts screw package (contains expansion screws, wood screws, flat washers, and wiring tablets) |
| a | Bag hanger mounting screws |
| b | Sling bag |
| c | Balanced package |
| d | Leaf frame screws package |
| e | Blade screw package |
3. Installation
3.1 Hanger Locking Mode
Note: Do not install the hanger on a roof that is leaking or damp. The hanger must be able to withstand a weight of 40 kg (88 lbs) or more to prevent detachment.
For Concrete Ceilings (Figure 2)
- Drill holes in the ceiling for two expansion screws (distance between holes should be appropriate).
- Insert the expansion screws into the holes, then place the hanger, flat washers, and nuts, and tighten with a spanner wrench.
For Wooden Ceilings (Figure 3)
- Secure the hanger to the ceiling with wood screws and flat washers using a screwdriver.
Note: Do not install on an uneven ceiling. The ceiling-mounted hanger must be firmly secured.
3.2 Suspension System Installation (Figures 4, 5, 6)
- Pass the connector housing boom through the bell.
- Insert the boom into the lifting boom head, aligning the holes.
- Insert the pin and R-pin through the bolt holes.
- Screw on the side of the head hanging locking.
- Hang the ceiling fan on the hanger, ensuring the hanger slot aligns with the card.
3.3 Power Cord Connection (Figure 10)
Connect the fan according to the wiring diagram. Ensure the fixed wiring is connected with an all-pole disconnect device with a contact separation of at least 3mm.
Wiring Diagram:
- Ground wire (yellow-green)
- Lamps Fire Wire (blue)
- Fan Fire Wire (black)
- Input power fire wire
- Input power zero line
3.4 Locking Bell and Blade Installation (Figures 11, 12, 13)
- Align the bell cast hanger, hanger hole, and side holes, then lock the screws.
- Align the Yasha and blade alignment holes, then tighten the screws.
- Align the fork hole leaf blade and lock Yasha bit with the holes of the motor and the screw holes on the lock.
Image: ludengchaoshi XG-Ceiling Fan with brown blades in a cafe setting.
Image: ludengchaoshi XG-Ceiling Fan with black blades in a gym/office setting.
Image: ludengchaoshi XG-Ceiling Fan with white blades in a dining room.
3.5 Lighting Installation
Depending on the style with lamps, ceiling fan light can be installed as multiple lamp or single lamp series.
Multi-Light Installation (Figures 14, 15, 16)
- Connect the fixture white and blue lines to the switch box white and blue lines respectively. Tighten the connection wiring beans, then shade lock.
- Neatly place the lamp lines into the switch box, then install the switch cover. Ensure the notch on the cover aligns with the switch box.
- Loosen the screws on the lamp cup by hand. Set the glass shade into the lamp cup. Hand-tighten the three screws on the side of the lamp cup to avoid the risk of falling. Ensure the three screws are firmly screwed in place but not too tight to avoid breaking the glass lampshade. Secure with the shade card lock snap ring clamp.
Single Lamp Installation I (Figure 17)
- Remove the switch cover and connect the lamp cover (same as step 1 of multi-light installation).
- Replace the cover under the switch to the switch box (same as step 2 of multi-light installation).
- Replace the lamp. Loosen the lamp panel on three screws, fit with glass, and then tighten the screws.
Single Lamp Installation II (Figure 18)
- Remove the switch cover and connect the lamp cover (same as step 1 of multi-light installation).
- Replace the cover under the switch to the switch box (same as step 2 of multi-light installation).
- Sequentially pass lampshades, decorative covers, and decorative head through the chain. The ornaments will lock with the teeth of the sturdy glass.
4. Operation
4.1 Fan Speed and Reverse Rotation (Figure 19)
- Adjusting Fan Speed: Pull the speed switch on the switch box. The first pull is for quick file, second for medium, third for slow, and fourth stops the fan.
- Reversible Ceiling Fan Functions:
- Reverse (Winter Mode): Toggle the switch on the ceiling fan box upwards. This creates an upward airflow, suitable for circulating warm air in winter.
- Forward (Summer Mode): Toggle the switch on the ceiling fan box downwards. This creates a downward airflow, providing a cooling breeze in summer.
4.2 Remote Control
The fan features a remote control for convenient adjustment of fan speed, light settings (dimming), and fan direction. Refer to the remote control's specific instructions for pairing and function details.
5. Maintenance
5.1 Warm Tips: Ceiling Fan Maintenance
- Regularly check the hanger, blades, leaf frame, and various other parts for looseness. Tighten any loose components promptly.
- Clean the ceiling fan regularly by wiping lightly with a soft brush or lint-free cleaning cloth. Do not use a damp cloth or other destructive cleaning agents.
- Do not add lubricant to any part of this product.
- Before cleaning, the ceiling fan must be disconnected from the power switch.
6. Troubleshooting
6.1 Fan Not Rotating
- Check if the ceiling fan's external power supply circuit fuse is blown or if the automatic protection switch is off.
- Check if the fan power line contact is secure.
- Verify that the fan power supply voltage is normal.
- If issues persist after checking these points, consult a professional electrical maintenance expert.
6.2 Fan Noise
- Check if all fan screws are securely installed and tightened.
- Check whether the motor has any friction obstacles during operation.
6.3 Lamp Not Lit
- Check if the lamp wire port is loose.
- Check if the lamp is damaged.
6.4 Fan Shaking (Balance Check and Adjustment)
If the fan exhibits significant shaking:
- Carefully re-read the installation instructions and ensure all steps are correct.
- Check that all mounting screws are tight and that the lob slot is correctly engaged with the rack card points.
- Check the level of all blades. Select the same slice of each blade and measure its height from the ceiling to ensure consistency.
- If the above methods are ineffective, use the included balance adjustment package. Start by placing the balance in the middle of any clip on a blade.
Note: Be careful to avoid collision with other objects when handling blades to prevent deformation.
Image: Example of a broken light globe and the LED light module.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | ludengchaoshi |
| Model Number | XG-Ceiling fan lights |
| Item Type | Ceiling Fans |
| Installation Method | Assembly |
| Control Method | REMOTE CONTROL |
| Number of Lights | 1 pcs |
| Is Dimmable | Yes |
| Is Bulbs Included | Yes |
| Light Source | LED |
| Luminous Flux | 2000-82000 |
| Power Source | AC |
| Voltage | 110 V (Remote dimming) |
| Wattage | 42 inches (300W), 52 inches (350W) |
| Blade Color Options | White, Black, Black Walnut Wood |
| Style | Modern Style |
| Certification | CE, ROHS |
| Origin | Mainland China |
| Package Length | 55 cm |
| Package Width | 36 cm |
| Package Height | 18 cm |
| Package Weight | 4.72 kg |
8. User Tips
- Quiet Operation: The fan is generally quiet, especially at the first three speed settings.
- Blade Material: While some models may have a 'Black Walnut Wood' finish, the blades are typically made of ABS plastic. Be aware of this if you expect solid wood.
- Light Globe Fragility: The light globe can be fragile; handle with care during installation. If it arrives broken, contact customer service.
- LED Light Source: The integrated LED light source may not be user-replaceable. If the light fails, contact support for assistance.
- Cable Length: For custom installations requiring longer downrods, be prepared that the existing cables might not be long enough and may require modification by a qualified professional.
9. Warranty and Support
This product comes with a 1-year warranty. For any questions, technical support, or warranty claims, please contact the seller or customer service. Provide your model number and purchase details when contacting support.
10. Additional Resources
A detailed user manual in PDF format is available for download. You can access it via the following link: View User Manual (PDF)