DRAGON GAUGE 5054-5

Contents

User Manual: 2-Inch 52mm Car Water Temperature Gauge

Model: 5054-5

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your new 2-inch (52mm) Car Water Temperature Gauge. Designed to accurately monitor your vehicle's engine coolant temperature, this gauge features a clear display with a range of 40~120℃ and white backlight for optimal visibility. Proper installation and understanding of its functions will ensure reliable performance and help you maintain your vehicle's health.

2. Safety Information

Please read and understand all safety warnings and instructions before attempting installation or operation. Failure to do so may result in property damage, injury, or improper device function.

  • Always disconnect the vehicle's battery before performing any electrical work to prevent short circuits and electrical shock.
  • Ensure all wiring connections are secure and properly insulated to avoid electrical hazards.
  • Wear appropriate personal protective equipment (PPE) such as gloves and eye protection during installation.
  • Avoid touching hot engine components during installation or when checking the gauge.
  • If you are unsure about any part of the installation process, seek assistance from a qualified automotive technician.

3. Package Contents

Verify that all components are present in your package:

  • 1x Water Temperature Gauge (40-120℃)
  • 1x Water Temperature Sensor (1/8 NPT thread)
  • 1x Wiring Harness
  • 1x Water Temperature Gauge Sensor Adapter (available in 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm sizes)
  • 2x Clamps for Sensor Adapter
  • 1x English Manual
Components of the water temperature gauge kit
Figure 1: Included components of the water temperature gauge kit.

4. Specifications

Feature Specification
Brand Name DRAGON GAUGE
Model Number 5054-5
Gauge Diameter 2 Inches (52mm)
Display Range 40~120℃
Backlight White
Power Professional 12V
Sensor Mounting Thread 1/8ZG (1/8 NPT)
Material Plastic + Metal
Item Height 33mm
Item Width 52mm
Item Length 56mm
Water Temp Joint Pipe Length 68mm
Water Temp Joint Pipe Sensor Port Diameter 10mm
Dimensions of the 52mm water temperature gauge
Figure 2: Dimensions of the 52mm Water Temperature Gauge.
Dimensions of the water temperature joint pipe
Figure 3: Dimensions of the Water Temperature Joint Pipe, showing 68mm length and 9mm (1/8NPT) sensor thread.

5. Setup and Installation

This section guides you through the installation of the water temperature gauge, sensor, and joint pipe. Ensure the vehicle is turned off and the battery is disconnected before starting.

5.1. Electrical Wiring

Follow the wiring diagram carefully for proper electrical connection:

  • RED wire: Connect to Battery 12V (+)
  • YELLOW wire: Connect to Ignition Switch 12V (+)
  • GREEN wire: Connect to Battery (-) (Ground)
  • BLACK wire: Connect to Battery (-) (Ground)
Electrical wiring diagram for the water temperature gauge
Figure 4: Electrical wiring diagram for the gauge. Connect Red to 12V battery positive, Yellow to 12V ignition switch positive, Green to battery negative, and Black to battery negative.

5.2. Water Temperature Sensor and Joint Pipe Installation

The water temperature sensor needs to be installed into the water temperature joint pipe, which is then integrated into your vehicle's cooling system.

  1. Choose the correct size water temperature joint pipe adapter that matches your vehicle's radiator hose diameter.
  2. Cut a section of your vehicle's radiator hose and insert the water temperature joint pipe. Secure it with the provided clamps.
  3. Thread the water temperature sensor into the 1/8 NPT port on the joint pipe. Ensure a snug fit to prevent leaks.
  4. Connect the sensor's wire to the gauge's wiring harness.
  5. Important: The water temperature sensor must be properly grounded. If the sensor has only one wire, ensure its body makes good contact with a grounded part of the vehicle chassis or engine block. If the sensor has two wires, connect one to the gauge and the other to ground.
Diagram showing water temperature sensor and joint pipe installation
Figure 5: Diagram illustrating the installation of the water temperature sensor into the joint pipe and its integration into the silicone hose. Note the ground wire connection for the sensor.
Assortment of water temperature joint pipes
Figure 6: Various sizes of water temperature joint pipes available to fit different radiator hose diameters.

6. Operating Instructions

Once installed and wired correctly, the water temperature gauge will display the engine coolant temperature in Celsius. The white backlight ensures readability in various lighting conditions.

  • Turn the vehicle's ignition to the 'ON' position. The gauge should power on and the needle will indicate the current coolant temperature.
  • During normal operation, observe the gauge to ensure the engine temperature remains within the optimal operating range (typically around 80-95℃).
  • Temperatures consistently above 100℃ may indicate an overheating issue and should be investigated immediately.
Water temperature gauge displaying 60 degrees Celsius
Figure 7: Gauge displaying 60℃.
Water temperature gauge displaying 80 degrees Celsius
Figure 8: Gauge displaying 80℃.

7. Maintenance

The water temperature gauge requires minimal maintenance. Regular checks can help ensure its longevity and accuracy.

  • Cleaning: Wipe the gauge face with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the display.
  • Connection Check: Periodically inspect all electrical connections and hose clamps to ensure they remain tight and free from corrosion.
  • Leak Inspection: Check around the water temperature joint pipe and sensor for any signs of coolant leaks. Address any leaks promptly to prevent engine damage.

8. Troubleshooting

If you encounter issues with your water temperature gauge, refer to the following common problems and solutions:

  • Gauge always shows 40℃: This is a common issue indicating that the water temperature sensor is not properly grounded. Ensure the sensor's ground connection is secure and has good electrical contact with the vehicle's chassis or battery negative terminal.
  • Gauge not powering on: Check the RED and YELLOW wire connections to ensure they are receiving 12V power. Verify the BLACK and GREEN wires are properly grounded. Check for blown fuses in the vehicle's electrical system.
  • Inaccurate readings: Ensure the sensor is fully submerged in coolant and that there are no air pockets around it. Verify the sensor is securely tightened in the joint pipe.
  • Gauge stopped working after a short period: Check all wiring connections for looseness or corrosion. Inspect the sensor and gauge for any visible damage. This could indicate an internal component failure or a loose connection that developed over time.

9. User Tips

  • Pre-installation check: Before final installation, temporarily connect the gauge and sensor to a 12V power source and immerse the sensor in hot water to verify it reads correctly. This can help identify faulty components before full vehicle integration.
  • Thread sealant: Use a small amount of thread sealant on the sensor threads when installing it into the joint pipe to prevent leaks.
  • Coolant level: After installing the joint pipe, ensure the coolant level is topped up and the system is bled of any air to ensure accurate temperature readings.

10. Warranty and Support

For any issues not covered in this manual or for further assistance, please contact your retailer or the manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.

A user manual in PDF format may also be available for download from the seller's website. Please refer to the product page for a link to the official PDF document if needed.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.