CNSPEED YC102483-WTC

Contents

CNSPEED 2" (52mm) Water Temperature Gauge Instruction Manual

Model: YC102483-WTC

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your CNSPEED 2-inch (52mm) Water Temperature Gauge. This high-performance gauge is designed for universal application in 12V vehicles, offering precise temperature monitoring with a vibrant 7-color LED backlight and a smooth stepper motor movement.

CNSPEED 2-inch Water Temperature Gauge with sensor and wiring
Figure 1: CNSPEED Water Temperature Gauge and included components.

2. Package Contents

Please verify that all items listed below are included in your package:

  • 1x Stepper Motor Water Temperature Gauge (2" / 52mm)
  • 1x Water Temperature Sensor (Thread size: 1/8NPT)
  • 1x Power Wire (Length: 60cm)
  • 1x English Installation Manual
  • 1x Retail Box
All components of the water temperature gauge kit laid out
Figure 2: Contents of the package including the gauge, sensor, wiring, and manual.

Video 1: Unboxing and overview of the water temperature gauge components.

3. Specifications

FeatureSpecification
Item NameWater Temperature Gauge
Model NumberYC102483-WTC
Diameter2 inches (52mm)
Temperature Range40-140 Degrees Celsius
Power SupplyDC (10-15V) 12V Professional
CurrentIGN MAX 0.3A, ILM 0.3A
Sensor Thread Size1/8 NPT
MaterialABS, Steel, Glass
Item Weight0.2kg
Item Dimensions (L x W x H)57mm x 53mm x 52mm
Special Features7 Colors Backlight, Stepper Motor
FitmentUniversal for all 12V Cars
OriginMainland China
Diagram showing the dimensions of the water temperature gauge: 57mm length, 53mm width, 52mm height
Figure 3: Gauge dimensions for installation planning.

4. Installation

IMPORTANT: Professional installation is highly recommended. The manufacturer is not responsible for guiding installation.

Follow these general steps for installing your water temperature gauge. Refer to the included English Installation Manual for more detailed instructions.

4.1 Wiring Diagram (Oil/Water Temperature Gauge)

Electrical wiring diagram for Oil/Water Temperature Gauge. Red wire to Ignition Switch 12V(+), Yellow wire to Ignition Switch 12V(+), Green wire to Sensor, Black wire to Battery(-).
Figure 4: Wiring diagram for the Oil/Water Temperature Gauge. Ensure correct connections to avoid damage.
  • Red Wire: Connect to Ignition Switch 12V(+)
  • Yellow Wire: Connect to Ignition Switch 12V(+)
  • Green Wire: Connect to the Water Temperature Sensor
  • Black Wire: Connect to Battery(-) / Ground

Note: The color of the gauge wires may sometimes differ from the general installation diagrams. Please refer to the specific wiring instructions provided in your physical manual if discrepancies are found.

4.2 Sensor Installation

Install the 1/8 NPT water temperature sensor into an appropriate location in your vehicle's cooling system. This typically involves using a T-fitting in a radiator hose or a dedicated sensor port.

Water temperature gauge with icons indicating stepper motor, smooth run, and accurate data. Below it, a triple gauge setup in a car dashboard.
Figure 5: The gauge features a stepper motor for smooth and accurate data display. Example of a multi-gauge setup.

5. Operation

Once properly installed and powered, the water temperature gauge will display the engine's coolant temperature. The gauge features a clear and bright LED display with 7 selectable colors.

5.1 Changing Backlight Color

To change the backlight color, locate the button on the lens of the gauge. Pressing this button will cycle through the 7 available colors, allowing you to customize the display to your preference or match your vehicle's interior lighting.

Seven different backlight colors of the water temperature gauge: white, red, green, blue, yellow, purple, light blue
Figure 6: The gauge offers 7 distinct backlight colors for personalization.

Video 2: Demonstration of the 7-color backlight feature (starts around 2:14).

6. Maintenance

The CNSPEED Water Temperature Gauge is designed for durability and requires minimal maintenance. Keep the gauge face clean using a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the lens or housing.

Regularly check the wiring connections to ensure they remain secure and free from corrosion. Inspect the sensor for any signs of damage or leaks.

7. Troubleshooting

  • Gauge not powering on: Check all power connections (Red, Yellow, Black wires) to ensure they are securely connected to the correct terminals. Verify the vehicle's 12V power supply is active.
  • Incorrect temperature readings: Ensure the green wire is properly connected to the sensor. Check the sensor for proper installation and ensure it is making good contact with the coolant. Verify the sensor's thread size (1/8 NPT) is compatible with your vehicle's port.
  • Backlight not changing colors: Ensure the gauge is powered on. Press the button on the lens firmly to cycle through colors. If it still doesn't change, check the wiring for any loose connections.
  • Wire color discrepancies: The gauge wire colors may sometimes differ from the general installation diagrams. Always prioritize the specific wiring instructions provided in your physical manual.

8. User Tips

  • Many users appreciate the clear display and accurate readings provided by this gauge.
  • The 7-color backlight feature is a great way to match the gauge to your vehicle's interior or personal preference.
  • When installing the sensor, ensure the correct thread size (1/8 NPT) is used to prevent leaks. If you have questions about thread sizes, consult a professional or your vehicle's manual.

9. Warranty and Support

For detailed warranty information and further support, please refer to the official user manual provided with your product. A digital version of the user manual (PDF) can be accessed here.

If you encounter any issues not covered in this manual, please contact the seller or a qualified automotive technician.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.