1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your RACBOX Mini H4 LED Projector Headlight Lenses. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Figure 1: RACBOX Mini H4 LED Projector Headlight Lenses and packaging.
2. Safety & Warnings
Important Safety Information:
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture during installation or operation beyond its IP67 rating.
- Ensure the engine is off and the original lamps are cool before handling.
3. Package Contents
Please check the package for the following items:
- 2 x RACBOX Mini H4 LED Projector Headlight Lenses (50W/piece, 100W/pair)
- Integrated LED Drivers
Video 1: Unboxing and overview of the RACBOX Mini H4 LED Projector Headlight Lenses.
4. Specifications

Figure 2: Product Specification Diagram.
| Feature | Detail |
|---|---|
| Light Type | H4 (Hi-Lo Beam) |
| Operating Voltage | DC 10-16V |
| Nominal Power | 50W/piece, 100W/pair |
| Color Temperature | 6000K White |
| Lumen Output | 50000LM (per pair) |
| Body Materials | Aviation Aluminum 6063, PC Lens |
| Waterproof Grade | IP67 |
| Operating Temperature | -40°C ~ +80°C |
| Lifespan | >50,000 Hours |
| Cooling System | Integrated Turbo Fan (15,000 RPM) and Aluminum Heatsink |
| CANBUS Compatibility | Integrated CANBUS driver for 99% vehicle compatibility (may require additional decoder for some sensitive vehicles) |
5. Setup (Installation Guide)
These LED headlight lenses are designed for plug-and-play installation. Follow these steps carefully:
- Preparation: Turn off your vehicle's engine and ensure the original halogen lamps are cool to the touch before beginning.
- Disconnect Power: Disconnect the power connector from the original halogen bulb.
- Remove Original Bulb: Carefully remove the factory halogen bulb from the headlight housing.
- Install LED Bulb: Insert the RACBOX Mini H4 LED lens into the headlight housing. Ensure it is seated correctly and secure it with the original clip mechanism.
- Connect Driver: Connect the integrated LED driver to the vehicle's headlight wiring harness. Ensure a secure connection.
- Test Functionality: Reconnect the vehicle's power (e.g., turn on ignition and headlights) to test the low beam and high beam functions.
- Adjust Beam (if necessary): If the light beam is not optimal, gently adjust the position of the LED lens within the housing until the desired cutoff line and beam pattern are achieved.
- Reassemble: Once satisfied with the light function and beam pattern, reassemble any removed headlight covers or components.
Note:
- If the LED light does not turn on during testing, please reverse the plug polarity and retest.
- For vehicles with sensitive CANBUS systems (e.g., some Dodge, BMW, Volvo, Mercedes-Benz, Jeep, Ford models), an additional decoder may be required if flickering or dashboard error messages occur.

Figure 3: Step-by-step installation guide.
Video 2: Installation demonstration of the RACBOX Mini H4 LED Projector Headlight Lenses.
6. Operation
The RACBOX Mini H4 LED Projector Headlight Lenses provide both low beam and high beam functionality, controlled by your vehicle's standard headlight switch.
- Low Beam: Provides a clear, flat cutoff line to illuminate the road ahead without dazzling oncoming traffic. This is suitable for regular driving conditions.
- High Beam: Projects a more powerful and focused light further down the road for maximum visibility in dark or rural areas.

Figure 4: Low Beam and High Beam patterns.
Video 3: Demonstration of low beam and high beam performance in a night driving scenario.
7. Maintenance
The RACBOX Mini H4 LED Projector Headlight Lenses are designed for durability and minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Cleaning: Periodically clean the outer lens surface with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners or harsh chemicals that could damage the lens.
- Inspection: Regularly inspect the wiring and connections for any signs of wear, damage, or corrosion. Ensure the lenses are securely mounted.
- Cooling System: The integrated turbo fan and aluminum heatsink are designed for efficient heat dissipation. Ensure that the rear of the headlight assembly has adequate ventilation and is not obstructed.
- Water Exposure: While rated IP67 waterproof, avoid prolonged submersion or high-pressure water jets directly on the headlight assembly.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED does not light up | Incorrect polarity; Loose connection; Faulty bulb/driver | Reverse the plug polarity; Check all connections; Test with another known good bulb/driver if available. |
| Flickering or dashboard error | Vehicle's CANBUS system incompatibility | Install an additional CANBUS decoder (resistor) to resolve compatibility issues. |
| Dim light or uneven beam | Improper installation; Dirty lens | Ensure the LED lens is fully seated and correctly oriented in the housing; Clean the outer lens surface. |
| Radio interference | Electrical noise from LED driver | Ensure proper grounding; For persistent issues, consult a professional auto electrician. |
9. User Tips
- Always verify your vehicle's headlight socket type (H4/9003/HB2) before purchasing to ensure compatibility.
- When installing, ensure the LED chips are oriented correctly (usually horizontally) for the best beam pattern.
- After installation, perform a quick night test to check the beam pattern and cutoff line, adjusting as needed to prevent blinding other drivers.
10. Warranty & Support
RACBOX provides a standard warranty for its products. Please refer to your purchase documentation for specific warranty terms and duration. The warranty typically covers manufacturing defects in components and workmanship.
What is Covered:
- Manufacturing defects in components or workmanship during the warranty period.
- Replacement parts and shipping costs for covered warranty claims.
What is Not Covered:
- Damage due to abuse, wrong installation, neglect or misuse.
- Damage from extreme environment, unusual physical or electrical stress or interference.
- Exposure to flooding, fire, or electrical problems associated with incoming power or other acts not the fault of RACBOX.
- Accessory parts.
- Damage arising from end-user error and failure to follow instructions relating to product's use.
For warranty service or technical support, please contact your seller or RACBOX customer support through the provided channels at the time of purchase.