1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Prelingcar LCD Digital Cluster. This advanced dashboard instrument panel offers a 12.3-inch anti-glare screen with 1920*720 resolution, running on a stable LinuxOS. It is designed to enhance your driving experience with modern digital displays and various synchronization features.
The system features a Linux-based operating system for smooth performance and supports integration with Android 13.0 for enhanced navigation and user interface customization. It also allows for synchronization with various external devices and cameras.
2. Safety Information
⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Always ensure the vehicle is turned off and the battery is disconnected before attempting any installation or maintenance. Professional installation is recommended.
3. Package Contents
Upon opening the package, please verify that all components are present and undamaged:
- Prelingcar LCD Digital Cluster Unit
- Wiring Harness
- User Manual (this document and a PDF version)
- Assembly Tools (as indicated by 'GIFT' on product image)
- Necessary connection cables (e.g., for rear cam, 360 cam, DVR, CarPlay/Android Auto)
4. Specifications
| Feature | Specification |
|---|---|
| Screen Size | 12.3 inches |
| Resolution | 1920*720 |
| Screen Type | Anti-Glare LED Digital |
| Operating System | LinuxOS |
| Material | ABS |
| Item Weight | 3.5 kg |
| Item Dimensions (L x W x H) | 40cm x 30cm x 20cm |
| Special Features | 9 inch LED digital display, supports various UI themes, CarPlay/Android Auto, rear cam, 360 cam, DVR sync. |
| Placement on Vehicle | Dashboard |
| Origin | Mainland China |
| OEM NO. Compatibility | For VW Polo 6R 2008-2016, Amarok 2010-2016 Years |
5. Setup and Installation
The Prelingcar LCD Digital Cluster is designed for Plug & Play installation, but some pre-installation steps and specific connections are required. Professional installation is highly recommended.
5.1. Pre-Installation Steps
- Turn off Vehicle Alarms: For Volkswagen devices, it is crucial to turn off the speed limit alarm and winter tire settings in your original car's multifunctional display before dismantling or replacing the car's instrument panel.
- Motherboard Transfer: Regardless of your VW model, you must remove the original motherboard from your existing instrument cluster and install it into the new digital cluster.
To do this: Enter settings on the multifunctional display, turn off the vehicle speed alarm, and then return. A video guide for this process is available: How to turn off video teaching.
5.2. Specific Installation for VW GOLF5 / EOS / Caddy / Touran
If your vehicle (VW GOLF5 / EOS / Caddy / Touran) has a "4 Out Circle Red instrument cluster", please follow the specific connection method below:
A video guide for this installation is available: Installation video for VW GOLF5 / EOS / Caddy / Touran.
5.3. Media Connection and Synchronization
The digital cluster supports various media connections and synchronization features:
- Rear Cam / 360 Cam / DVR / CarPlay / Android Auto: After connecting the middle cable, the digital cluster can synchronize and display content from your Android player. When choosing the theme, digital mode can be set to full screen from the Android player to the digital cluster.
- Wireless/Wired iPhone or Android Phone Connection: For detailed instructions, refer to the video: How to wireless/wire connect the iPhone or android phone for VW digital cluster.
- HDMI Cable Connection: To connect the HDMI cable for the Volkswagen digital cluster with the radio Android player, watch this video: How to connect the HDMI cable.
- CarPlay/Android Auto Synchronization: For iPhone (Apple) or Huawei (Android) phone connection via HDMI cable for CarPlay/Android Auto synchronization, refer to: CarPlay/Android Auto sync video.
5.4. Video Installation Guides
For visual guidance on installation, please refer to the following official videos:
- VW Passat (2017) Installation: https://youtu.be/D8tlx6h0Svw
- VW Golf 6 Mechanical Instruments Modification: https://youtu.be/K9JSKCPHikc
- VW Golf 7 Mechanical Instrument Modification: https://youtu.be/WLpN78sgNgY
- VW Tiguan/Sciricco Mechanical Instrument Modification: https://youtu.be/ySrg55XC30E
- VW Passat B8/Jetta Mechanical Instrument Modification: https://youtu.be/bylYaPyUa24
- Audi TT Mechanical Instrument Modification: https://youtu.be/DDE39FJGePY
6. Operating Instructions
This section details how to configure and operate your digital cluster.
6.1. Digital Function Settings
- Kilometer Setting:
- Click on the main interface settings -> Advanced settings.
- Enter password "123456" and click "OK" to confirm.
- In the total mileage column, enter the mileage value displayed on the original instrument panel.
- Press the confirm button.
- Model Settings:
- Click on the main interface settings -> Advanced settings.
- Enter password "123456" and click "OK" to confirm.
- Select the corresponding model in the model selection bar.
- VW Fuel Tank Capacity Setting:
- Click on the main interface settings -> Advanced settings.
- Enter password "123456" and click "OK" to confirm.
- Enter "93L" in the main fuel tank capacity column.
- Click the confirm button.
- Enter "45L" in the secondary fuel tank capacity column.
- Click the confirm button.
Please set the details according to your specific car model and fuel tank configuration.
6.2. Dashboard Display Options
The digital cluster offers various display themes and customization options. You can navigate through these using your steering wheel controls.
Video demonstrating the digital cluster's features and UI themes, including various display modes and settings.
7. Maintenance
- Maintenance Information Clear: To clear maintenance information, navigate to "Subtotal Mileage" and select "Clear" in the settings.
- Oil Change Reminder: The cluster can display reminders for upcoming maintenance, such as oil changes. For example, it may show "Next oil change maintenance left 1300 km."
- Software Updates: The Bluetooth and WiFi functions are primarily for remote software upgrades. Do not alter these settings unless instructed by support.
8. Troubleshooting (Q&A)
8.1. Mirror Screen Related Questions
- Q: Mobile phone screen casting sometimes does not cast the screen, or cannot find the RK.
- R: If the previous connection was not completely disconnected, turn off the engine and lock the car for 5 minutes to ensure a complete disconnection. Then restart your phone and try again.
- Q: Phone casting audio is inside the dash, and there is no sound from the car navigation.
- R: This behavior is determined by the mobile phone. Android phones (e.g., Samsung, Huawei) can wirelessly cast video to the instrument via WIFI, with sound sent to the central navigation's speaker via Bluetooth. Apple's iOS system is more restricted and does not support separate audio and video output. Operation: Cast the screen to the instrument, then connect the mobile phone's Bluetooth to the central control navigation's Bluetooth.
- Q: The phone cast and navigation interface can't be found.
- R: You can see the navigation interface showing the compass. Press the multifunction steering wheel down button to bring it up.
- Q: Why is the mobile phone screen casting only a small piece in the middle and the display interface is very small?
- R: Pull down the mobile phone's notification bar (like turning on WIFI), close the vertical screen lock function. Enter the navigation map or video software, shake the mobile phone to enable horizontal screen display. In digital UI mode, you can then display full-screen navigation or video. Setting method: Press the left button on the right side of the square control to find the interface menu, press the down button to choose "digital" mode, then press the OK button.
- Q: When the phone is resting on the screen, the dash casting interface also follows the black screen.
- R: This is a mobile phone decision. Some mobile phones (e.g., Samsung, Huawei, Vivo) support screen casting. Check your phone's screen casting settings. If your phone does not have this feature, you can set the phone's off-screen time permanently or for a longer duration.
8.2. Dashboard Related Questions
- Q: Bluetooth and WiFi functions.
- R: The Bluetooth and WiFi functions of the meter are for remote upgrade of the catchprotocol use. Do not make settings unless instructed by support.
- Q: Vehicle Selection.
- R: Setting method: Press the left button on the right side of the multifunctional reassurance disc to find the "Settings" menu. Press the down button to find "Model Selection". Press the OK button to enter. Press the down button to find the model of your own vehicle. Press the OK button to confirm. Turn off the engine and lock the car for two minutes after power on to apply the changes successfully.
- Q: Time setting.
- R: The PQ system does not have year, month, and day settings. MQB systems handle time settings within the "Settings" -> "Time settings" menu.
- Q: PQ turn signals not showing.
- R: In settings -> physical lights -> off, lock the car with the engine off for a few minutes.
- Q: PQ tanks are not allowed.
- R: In Settings -> Configuration Calibration -> Manual, adjust downward with the actual tank a little bit until the tank is full.
- Q: No speed allowed.
- R: In Settings -> Configuration Calibration, faster car speed is adjusted to -3, slower to +3.
- Q: The car dings at some fixed speed above 30.
- R: Set the speed limit alarm in the original mechanical instrumentation to 250 before switching it off.
9. User Tips
- Installation, while requiring attention to detail, is generally manageable. Refer to the provided video guides for assistance.
- The digital cluster offers good functionality, though some translations in the UI might be slightly awkward.
- The product provides a modern and visually appealing upgrade to the car's interior.
- Keep an eye out for software updates to improve functionality and address any minor issues.
- If experiencing issues with the HDMI cable, try disconnecting and reconnecting, or ensure it's properly seated.
10. Support and Contact Information
For any technical problems or questions, please contact our engineering support team. We offer professional engineering help for installation and troubleshooting.
- Sale Contact Phone: +86 13360093498
- Email Address: candicesong1985@163.com
- Skype ID: live:.cid.fd83a6a056155b8f
- WhatsApp Number: +905010825798
Please download the Skype app and add our engineer's Skype ID for direct assistance. We kindly request that you contact us before leaving any negative feedback if you encounter issues. Your satisfaction is important to us, and we are committed to providing good service.
Company Address: Third floor, No.56 of Anxing Road, Dakang community, Henggang town, Longgang district, Shenzhen city, Guangdong province, China.