WESA EP-01-BM

Contents

WESA EP-01-BM Wall Rocker Light Switch User Manual

Model: EP-01-BM | Brand: WESA

1. Introduction

Thank you for choosing the WESA EP-01-BM Wall Rocker Light Switch. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new light switch. Please read this manual thoroughly before installation and keep it for future reference.

WESA EP-01-BM Light Switch with wood finish

Figure 1: WESA EP-01-BM Light Switch (Example: Light Wood Finish)

2. Safety Information

WARNING: Electrical installation should only be performed by a qualified electrician. Always turn off power at the circuit breaker before installing or servicing the switch.

  • Ensure the main power supply is disconnected before any installation or maintenance.
  • Do not install in wet or damp locations.
  • Verify that the switch's current rating (16A) is suitable for your circuit.
  • This product is designed for indoor use only.
  • The switch is made from high-temperature flame retardant plastic to prevent fire hazards.
Illustration of flame retardant material protecting against fire

Figure 2: High-Temperature Flame Retardant Material Feature

3. Product Overview

The WESA EP-01-BM is an EU Standard Push Button/Rocker Light Switch featuring a durable plastic panel with a water transfer coating for a classic wood finish. It is available in 1 Gang 1 Way and 2 Gang 1 Way configurations.

Key Features:

  • Material: High-quality flame retardant plastic with water transfer coating.
  • Design: Classic wood grain aesthetic, available in multiple colors.
  • Durability: Firm shell, anti-drop, and impact-resistant design.
  • Type: Push Button / Rocker Switch.
  • Current Rating: 16A.
  • Certifications: RoHS, LVD, CE compliant.
Assortment of WESA light switches in various wood finishes

Figure 3: Variety of WESA Switches with Different Finishes

Close-up of WESA switches showing natural colors and delicate hand feel

Figure 4: Colorful Switches with Natural Aesthetic and Delicate Feel

WESA switch demonstrating anti-drop and impact resistance

Figure 5: Firm Shell and Quality Switch Design

4. Specifications

Attribute Value
Brand NameWESA
Model NumberEP-01-BM
Item TypeSWITCHES
Switch TypePush Button Switch
Current16A
MaterialPlastic
FeaturesWater transfer coating, Flame Retardant
CertificationRoHS, LVD, CE
OriginMainland China
Warranty10 years

Package Dimensions and Weight:

  • Length: 13 cm
  • Width: 12 cm
  • Height: 6 cm
  • Weight: 0.099 kg

Product Dimensions:

The following diagram illustrates the dimensions for both 1 Gang 1 Way and 2 Gang 1 Way switch variants:

Dimensional drawing for 1 Gang 1 Way and 2 Gang 1 Way WESA light switches

Figure 6: Product Dimensions (1 Gang 1 Way and 2 Gang 1 Way)

  • Front Plate: 83mm (3.26in) x 83mm (3.26in)
  • Mounting Depth (from front plate to back of mechanism): 40mm (1.57in)
  • Mechanism Width: 53mm (2.08in)
  • Mechanism Height: 48mm (1.88in)
  • Mechanism Thickness: 24mm (0.94in)

5. Installation (Setup)

This section provides general guidance for installing the WESA EP-01-BM light switch. For detailed wiring diagrams and specific electrical requirements, please consult a qualified electrician and refer to the official PDF manual.

Tools Required:

  • Screwdriver (appropriate size for terminal screws)
  • Wire strippers
  • Voltage tester
  • Insulating tape (optional)

Installation Steps:

  1. Turn off Power: Locate the circuit breaker controlling the light fixture and turn off the power. Verify that the power is off using a voltage tester.
  2. Remove Old Switch (if applicable): Carefully remove the existing switch from the wall box. Disconnect the wires, noting their connections (e.g., Line, Load, Ground).
  3. Prepare Wires: Strip approximately 10-12mm (0.4-0.5 inches) of insulation from the ends of the electrical wires.
  4. Connect Wires: Connect the wires to the terminals on the back of the WESA switch. Ensure a secure connection for each wire.
    • Line (Live) Wire: Connect to the designated 'L' terminal.
    • Load Wire: Connect to the designated 'L1' (for 1 Gang) or 'L1', 'L2' (for 2 Gang) terminals.
    • Ground Wire: Connect to the ground terminal (if present and required by local codes).
  5. Mount the Switch: Gently push the wired switch into the wall box. Secure it with the mounting screws provided.
  6. Attach Faceplate: Snap or screw the decorative faceplate onto the switch mechanism.
  7. Restore Power: Turn the power back on at the circuit breaker.
  8. Test the Switch: Operate the switch to ensure it functions correctly.

Video 1: WESA Light Switch 360-degree View (shows front and back mechanism)

6. Operation

The WESA EP-01-BM is a simple on/off rocker switch. To operate, press the top or bottom of the rocker panel to toggle the connected light or appliance on or off.

  • 1 Gang 1 Way Switch: Controls a single light or appliance from one location.
  • 2 Gang 1 Way Switch: Controls two separate lights or appliances from one location.

7. Maintenance

The WESA EP-01-BM light switch requires minimal maintenance.

  • Cleaning: Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this may damage the finish.
  • Inspection: Periodically check for any loose connections or signs of wear. If any issues are found, turn off the power at the circuit breaker and consult a qualified electrician.

8. Troubleshooting

Problem Possible Cause Solution
Light does not turn on/off No power to the switch; Loose wiring; Faulty bulb/fixture; Faulty switch. Check circuit breaker. Turn off power, check wire connections. Test bulb/fixture. If all else fails, replace switch (consult electrician).
Switch feels loose in the wall Mounting screws are loose. Turn off power. Tighten mounting screws.
Switch is hot to the touch Overload on the circuit; Loose connection. Immediately turn off power. Consult a qualified electrician to inspect the circuit and wiring.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact a qualified electrician or WESA customer support.

9. User Tips

No specific user tips or frequently asked questions were available from provided sources. Always ensure proper installation by a qualified professional for optimal performance and safety.

10. Warranty and Support

The WESA EP-01-BM light switch comes with a 10-year warranty from the date of purchase, covering manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the official product page or packaging for contact details.

11. Additional Resources

A detailed user manual in PDF format is available for download, providing comprehensive instructions and diagrams:

Download User Manual (PDF)

© 2024 WESA. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.