Introduction
The Flydigi APEX 4 is an elite gaming controller designed for a superior gaming experience across multiple platforms. It features advanced force feedback triggers, stepless damping adjustment for joysticks, and precise rebound technology to enhance gameplay. This manual provides instructions for setup, operation, troubleshooting, and specifications for your APEX 4 controller.
Package Contents
Upon unboxing your Flydigi APEX 4 controller, please ensure all the following items are present:
- Flydigi APEX 4 Game Controller
- Replaceable Thumbsticks (various heights)
- USB Wireless Dongle
- Phone Holder
- Charging Cable (USB)
- Carrying Case
Setup Guide
1. Charging the Controller
Before initial use, ensure your controller is fully charged using the provided USB charging cable. Connect the cable to the controller's USB-C port and a power source.
2. Connecting to PC (Wired)
For wired gameplay on PC, follow these steps:
- Connect the controller to your PC using the USB cable.
- Confirm the controller's mode is set to XInput. The controller's light or screen will indicate the current mode.
- Ensure your PC's USB ports are properly configured. Using a direct motherboard USB port (preferably USB 2.0) is recommended over third-party USB docks to prevent connection issues.
- Verify the controller is recognized as an "Xbox 360 Controller for Windows" in your PC's Device Manager. Navigate to Control Panel > Hardware and Sound > Device Manager.
3. Connecting to PC (Wireless via 2.4G Dongle)
For wireless gameplay on PC using the 2.4G dongle:
- Plug the USB wireless dongle into a USB port on your PC. It is recommended to use a direct motherboard USB port (preferably USB 2.0) and avoid USB docks.
- Ensure there are no obstructions or other wireless devices (like other dongles, HDMI cables, Wi-Fi, Bluetooth devices) too close to the dongle, as this can cause interference.
- Turn on the controller. It should automatically pair with the dongle.
- Confirm the controller is recognized as an "Xbox Wireless Controller" in your PC's Devices and Printers.
4. Connecting via Bluetooth
The controller supports Bluetooth connection. For optimal performance, ensure your PC's Bluetooth card is compatible (Intel 200 series or better is recommended).
- Enable Bluetooth on your device (PC, Mobile, Switch, TV).
- Put the controller into Bluetooth pairing mode (refer to the controller's specific instructions for button combinations, usually indicated by a flashing light).
- Select the Flydigi APEX 4 from the list of available Bluetooth devices on your system to pair.
5. Software Installation (Flydigi Space Station)
To unlock the full potential of your APEX 4 controller, including customization, calibration, and firmware updates, install the Flydigi Space Station software. You can download the necessary programs from the official Microsoft website or use the following links:
After installation, plug in your controller and ensure it is recognized by the software.
Operating Instructions
1. Basic Controls
The APEX 4 controller features standard gamepad layouts with two joysticks, a D-pad, action buttons (A, B, X, Y), shoulder buttons (L1, R1), and triggers (L2, R2). Additional back paddles and customizable buttons are available for advanced configurations via the Flydigi Space Station software.
2. Force Feedback Triggers
The ultra-precise force feedback servos motor and micron-level gear structure in the triggers provide dynamic physical feedback, enhancing immersion in games. These triggers deliver various tactile effects based on in-game actions.
3. Stepless Damping Adjustment
The joysticks feature a 30-100gf stepless damping adjustment, allowing you to fine-tune the resistance for precise control. The Xbox standard damping is 55gf, providing a reference point for customization.
4. Precise Rebound and No Drift
The APEX 4 is engineered for swift movement without drift, offering a 0 dead zone and less than 0.5% rebound deviation, significantly outperforming ordinary joysticks.
5. Customization
Utilize the Flydigi Space Station software to customize button mappings, joystick curves, trigger sensitivity, and other advanced settings to tailor the controller to your preferences.
Maintenance
- Keep the controller clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Store the controller in a cool, dry place, away from direct sunlight and extreme temperatures.
- When not in use for extended periods, ensure the controller is fully charged before storage to maintain battery health.
- Avoid dropping the controller or subjecting it to strong impacts.
Troubleshooting
1. Controller Not Connecting/Recognized on PC
- Wired Connection: Ensure the USB cable is securely connected to both the controller and a functional USB port on your PC. Verify the controller is in XInput mode. Check Device Manager for proper recognition as an "Xbox 360 Controller for Windows."
- Wireless (2.4G Dongle): Re-plug the dongle. Try different USB ports, preferably directly on the motherboard (USB 2.0 ports are often more stable). Ensure no other wireless devices are causing interference near the dongle.
- Bluetooth Connection: Unpair the controller from your device's Bluetooth settings and attempt to pair it again. Restart your system. Check for updated Bluetooth drivers or firmware for your PC's Bluetooth card.
2. Resetting the Controller to Factory Settings
If you experience persistent issues, a factory reset can often resolve them:
- For Apex Series: In the power-on state, press and hold the SELECT + START + HOME keys simultaneously for five seconds. The RGB light will flash, indicating a reset and clearing of pairing information.
- For Vader Series: In the power-on state, press and hold the SELECT + START + HOME keys. The RGB light on the handle will dim and then turn on again.
- For Direwolf Series: In the power-on state, press and hold the LB + RB + SELECT keys for five seconds. The handle will vibrate to confirm the reset.
3. Joystick/Trigger Calibration
If you notice issues with joystick or trigger accuracy, calibration may be required. This is typically done through the Flydigi Space Station software. Refer to the software's documentation or the following links for detailed calibration guides:
- Apex Series Calibration: Apex Calibration Guide
- Direwolf Series Calibration: Direwolf Calibration Guide
Note: Do not calibrate the trigger in a micro-motion state; it needs to be in a linear state.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | FLYDIGI |
| Model Number | APEX 4 (also known as Flydigi Vader 4 Pro) |
| Compatible Platforms | Nintendo Switch, PC, iOS, Mobile Device (Android Smartphones) |
| Interface Type | USB, Bluetooth, 2.4G Wireless |
| Trigger Button Type | Hall-Linear |
| Hall Effect | Yes |
| Battery Included | Yes |
| Joystick Damping Adjustment | 30-100gf Stepless Adjustment |
| Joystick Rebound Deviation | <0.5% |
| Package Dimensions (L x W x H) | 20 cm x 15 cm x 10 cm |
| Package Weight | 1.2 kg |
User Tips
- For competitive gaming, a wired connection often provides the most stable and lowest latency experience.
- Experiment with the stepless damping adjustment for joysticks to find the sensitivity that best suits your playstyle and game genre.
- Regularly check the Flydigi Space Station software for firmware updates to ensure optimal performance and access to new features.
- When using the phone holder, ensure your mobile device is securely fastened to prevent accidental drops.
Warranty and Support
For detailed warranty information and customer support, please refer to the official Flydigi website or contact your retailer. An electronic version of the user manual is also available in PDF format for comprehensive guidance: