1. Introduction
The BENETECH GM8901+ is a multi-functional digital anemometer designed for precise measurement of wind speed, wind temperature, and air flow. This instrument is ideal for various applications including environmental monitoring, HVAC system analysis, outdoor sports, and industrial settings. It features a large LCD display, data storage capabilities, and a retractable drag rod for convenient use.
Video: Overview of the BENETECH GM8901+ Digital Anemometer.
2. Product Features
- Measurement of wind velocity, temperature, and flow.
- Unit conversion for wind velocity, temperature, and flow.
- Measurement of maximum and minimum wind velocity.
- Measurement of 2/3 Vmax and average wind flow.
- Data holding, storing (up to 500 records), and deleting functions.
- Low battery indication.
- Automatic power-off function (after 10 minutes of inactivity).
- Backlight for improved visibility.
- PC connectivity via USB cable.
- Audio key pressing alert.
- Large LCD display.
- Retractable drag rod for extended reach.
Image: BENETECH GM8901+ Digital Anemometer and its key features.
3. Setup
3.1 Battery Installation
- Locate the battery compartment on the back of the device.
- Open the battery cover.
- Insert a 9V battery (not included), ensuring correct polarity.
- Close the battery cover securely.
Image: Rear view of the anemometer with the battery compartment open.
3.2 Extending the Retractable Rod
The anemometer features a retractable drag rod for measuring wind speed at different heights or distances. Gently pull the rod to extend it to the desired length. The rod can extend up to 55.3 cm (approximately 21.7 inches) from its base.
Image: Diagram illustrating the retractable rod's extension capabilities, showing it can stretch to 140cm (total length including handle) and the probe part can stretch to 55cm.
4. Operating Instructions
4.1 Device Layout and Buttons
Image: Detailed view of the anemometer's display and control buttons, including Power, Unit, Hold, C/F LED, Up/Down arrows, and Max/Min/Avg.
4.2 Basic Operation
- Power On/Off: Press the Power button (usually marked with a circle and vertical line) to turn the device on or off. The device will automatically power off after 10 minutes of inactivity to conserve battery.
- Measurement: Point the wind wheel (vane) towards the air flow. The current wind speed and temperature will be displayed on the LCD.
- Unit Conversion: Press the UNIT button to cycle through different wind velocity units (m/s, ft/min, knots, km/hr, mph).
- Temperature Unit: Press the ℃/℉ LED button to switch between Celsius and Fahrenheit temperature units. This button also typically controls the backlight.
- Data Hold: Press the HOLD button to freeze the current reading on the display. Press it again to release.
- Max/Min/Avg: Press the MAX MIN AVG button to view the maximum, minimum, or average wind speed/temperature recorded during the current measurement session.
- Backlight: The ℃/℉ LED button usually activates or deactivates the display backlight.
4.3 PC Connection
The GM8901+ can connect to a PC via a USB cable for data transfer and analysis. Connect the USB cable to the device's port and your computer. Refer to the software manual (if provided) for detailed instructions on data logging and analysis.
Image: The anemometer connected to a personal computer via a USB cable.
5. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: When the low battery indicator appears on the display, replace the 9V battery promptly to ensure accurate readings and prevent data loss.
- Storage: Store the anemometer in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the retractable rod is fully retracted before storage.
- Avoid Liquids: Do not expose the device to liquids or powders, as this can damage internal components.
6. Troubleshooting
- Device not turning on: Check if the 9V battery is correctly installed and has sufficient charge. Replace if necessary.
- Inaccurate readings: Ensure the wind wheel is unobstructed and facing the airflow directly. Check for any debris in the wind wheel.
- Display issues: If the display is dim, activate the backlight using the ℃/℉ LED button. If the display is still problematic, check the battery level.
- Automatic power-off: This is a normal power-saving feature. If the device turns off unexpectedly during use, ensure the battery is not low.
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | Digital Anemometer |
| Model Number | GM8901+ |
| Wind Velocity Measurement Range | 0-45 m/s, 0-140 km/hr, 0-8800 Ft/min, 0-88 knots, 0-100 mph |
| Wind Velocity Accuracy | ±3% |
| Wind Temperature Measurement Range | 0-45℃ (32℉-113℉) |
| Wind Temperature Accuracy | ±2℃ |
| Resolution | 0.2℃, 0.1 m/s |
| Units of Velocity | m/s, ft/min, knots, km/hr, mph |
| Temperature Unit Selection | ℃/℉ |
| Beaufort Scale | Yes |
| Wind Chill Indication | Yes |
| LCD Backlight Display | Yes |
| Max/Min Reading | Yes |
| Average/Current Reading | Yes |
| Data Hold | Yes |
| Low Battery Indication | Yes |
| Manual/Auto Power Off | Yes |
| Retractable Drag Rod | Yes |
| Power Supply | 9V battery (Not INCLUDED) |
| Product Size | 145 x 72 x 35 mm |
| Product Weight | 350 g |
| Package Size | 320 x 240 x 85 mm |
| Package Weight | 1150 g |
| Certification | CE |
| Origin | Mainland China |
8. User Tips
No specific user tips are available from customer reviews or Q&A for this product at this time. Always refer to the official manual for best practices.
9. Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact the manufacturer directly. A comprehensive user manual in PDF format is available for download: