JINMOCYCLE Radiator Guard Engine Skid Plate Cover 800MT

Contents

User Manual: Motorcycle Radiator Guard & Engine Skid Plate Cover

Model: Radiator Guard Engine Skid Plate Cover 800MT

Brand: JINMOCYCLE

1. Important Safety Information

⚠ Warning: Improper installation may cause the decorative replacement cover to loosen or fall off during riding, leading to traffic accidents or equipment damage. Do not use if cracked, deformed, or damaged. Ensure firm mounting; do not obstruct moving parts, controls, or heat-dissipating components. Keep away from children and pets; avoid extreme temperatures, corrosive substances, and impact. Do not modify the cover or use it for non-decorative/replacement purposes. Ensure it does not interfere with riding operations.

  • Always ensure the motorcycle is stable and turned off before beginning installation.
  • Wear appropriate safety gear during installation.
  • Do not over-tighten fasteners to prevent damage to components.
  • Regularly inspect the installed cover for tightness and condition.

2. Package Contents

Please verify that all components are present before beginning installation:

  • Radiator Guard (1 unit)
  • Engine Skid Plate Cover (1 unit)
  • Mounting Hardware (screws, washers, etc. - quantity may vary based on model)
Black Radiator Guard and Engine Skid Plate Cover components

Figure 1: Black Radiator Guard and Engine Skid Plate Cover components.

3. Setup and Installation

Follow these steps for proper installation of the Radiator Guard and Engine Skid Plate Cover:

  1. Prepare the Motorcycle: Park the motorcycle on stable ground, turn off the engine, and use a stand to fix the wheels securely.
  2. Locate Mounting Position: Identify the target mounting position on the motorcycle (body, frame, or existing components). If applicable, remove any original decorative covers and clean the mounting surface thoroughly.
  3. Inspect Components: Check the new decorative replacement cover (radiator guard and skid plate) for any damage.
  4. Pre-assemble (Recommended): It is advisable to loosely assemble the radiator guard and engine skid plate cover together first, without fully securing the top radiator hooks. This can help in aligning the components, especially if working around crash bars.
  5. Align and Fit: Carefully align the radiator guard and skid plate with the designated mounting points on the motorcycle. Ensure a tight fit without pressing on wires or other critical components.
  6. Secure the Cover: Use the provided matching fixing screws or buckles. Tighten them evenly. Avoid over-tightening to prevent damage to the cover or the mounting surface.
  7. Final Check: After installation, verify that the cover is firm and not loose. Confirm that it does not interfere with any motorcycle operations (e.g., steering, suspension, controls) before riding.
Radiator guard and skid plate installed on a motorcycle, showing black and silver versions

Figure 2: Radiator Guard and Engine Skid Plate Cover installed on a motorcycle (black and silver variants shown).

4. Operating Guidelines and Restrictions

  • This product is suitable for 125cc-1000cc civilian motorcycles. Refer to the "Specifications" section for detailed applicable models.
  • Do not use on damaged or non-standard mounting positions.
  • Avoid heavy impact or scratching to the cover.
  • Ensure the cover does not block heat dissipation or interfere with wiring harnesses.
  • Always comply with local road regulations.

5. Maintenance

  • Regular Inspection: Check the cover's tightness and overall condition regularly.
  • Cleaning: Clean the surface with a soft cloth to remove dirt and prevent corrosion.
  • Damage: Replace the cover immediately if it becomes cracked, deformed, loose, or otherwise damaged.

6. Troubleshooting

  • Cover Feels Loose After Installation:
    • Ensure all mounting screws are tightened evenly and securely.
    • Verify that the cover is correctly aligned with all mounting points.
    • If the issue persists, double-check the product's compatibility with your specific motorcycle model and year.
  • Difficulty in Fitting:
    • Ensure you have removed any original covers or obstructions.
    • Try pre-assembling the guard and skid plate loosely before attempting final mounting.
    • If working around crash bars, ensure the guard can slide into position behind them.

7. Specifications

FeatureDetail
Brand NameJINMOCYCLE
Model NameRadiator Guard Engine Skid Plate Cover 800MT 800 MT 800 MT800
Item TypeCovers & Ornamental Mouldings
Material TypeAluminum
Condition100% Brand New
ColorAs the picture show (various options available)
Item Weight0.43 kg
Item Length35 cm
Item Width29 cm
Item Height5.5 cm
FunctionCools water tank, reduces damage to water tank
OriginMainland China
Fitment
  • For CFMOTO CF MOTO 800MT 800 MT Touring 2021-2026
  • For CFMOTO CF MOTO 800MT 800 MT Sport 2021-2023
  • For CFMOTO CF MOTO 800MT 800 MT Pro 2023-2026
  • For CFMOTO CF MOTO 800MT 800 MT Explore 2024-2026
  • For CFMOTO CF MOTO 800MT 800 MT Urban 2024-2026

8. User Tips

  • Enhance Fit: Some users suggest adding thin rubber strips or bands to the radiator sides for a more secure and snug fit, especially if you notice any small gaps.
  • Pre-Assembly: For easier installation, especially if your motorcycle has crash bars, try loosely assembling the radiator guard and skid plate together first. Then, position the combined unit, sliding it behind any obstructions before final tightening.
  • Check All Fasteners: After your first ride, re-check all mounting screws to ensure they remain tight. Vibrations can sometimes cause fasteners to loosen slightly.

9. Warranty and Support

Warranty: A 12-month warranty is provided for manufacturing defects only. This warranty excludes damage resulting from improper installation, impact, corrosion, scratching, or modification of the product.

For further assistance or warranty claims, please contact your retailer or the manufacturer.

A PDF version of the general product manual can be found here.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.