1. Introduction
Thank you for choosing the Coolo Zigbee Smart Vibration Sensor. This device is designed to detect real-time motion, shock, and tilt, providing instant notifications to your smartphone via the Smart Life or Tuya app. It requires a Zigbee gateway to function. Please read this manual carefully before use to ensure proper operation and to avoid any damage.
For a comprehensive guide, you may also refer to the official PDF user manual: View PDF Manual
2. Key Features
- Real-time monitoring of vibration, shock, and tilt.
- Instant push notifications to your smartphone.
- Smart automation for linkage with other Zigbee smart devices.
- Customizable sensitivity settings.
- Low power consumption with low battery alarm.
- Compatible with Tuya and Smart Life applications.

3. Setup Guide
3.1. Network Configuration
- Power On: Anticlockwise rotate the battery cover to open. Remove the battery insulation film to power on the product.
- Reset for Pairing: Press the RESET button for approximately 3 seconds and then release. The red LED indicator will flash, indicating the device is ready for network configuration.
- Add Device to App: Open your Smart Life or Tuya app. Ensure your Zigbee gateway is powered on and connected to the app. Follow the app's instructions to add a new device. Search for the vibration sensor.
Note: This Zigbee sensor requires a Zigbee gateway (hub) to connect to your network and the Smart Life/Tuya app. It is compatible with Tuya/Ewelink hubs and other standard Zigbee gateways.
3.2. Installation Instructions
- Use the provided 3M adhesive sticker to affix the product to your desired target position.
- Ensure the sensor is placed in a suitable location where vibrations or tilts are expected to occur.


4. Operating Instructions
4.1. Real-time Monitoring and Alerts
Once connected to your Zigbee gateway and the Smart Life/Tuya app, the sensor will provide real-time monitoring. Whenever vibration, shock, or tilt is detected, you will receive an instant push notification on your smartphone.


4.2. Smart Automation Linkage
The sensor can be intelligently linked with other smart devices within the same Smart Life app. For example, if the sensor detects vibration or shock on a safe box, a smart switch can be triggered to turn on a light or an alarm, providing enhanced security for your property.

4.3. Customize Sensitivity Settings
You can adjust the sensitivity of the sensor through the Smart Life/Tuya app to better suit your specific monitoring needs and environment. This allows for fine-tuning detection to prevent false alarms or ensure critical events are captured.

4.4. Low Power and Low Battery Alarm
The sensor is designed for low power consumption. The app will provide a real-time battery level display and send a low battery alarm notification, prompting you for timely battery replacement.

5. Maintenance
5.1. Battery Replacement
When the low battery alarm is triggered, replace the CR2450 battery. To do this, anticlockwise rotate the battery cover, remove the old battery, insert a new CR2450 battery with the correct polarity, and then clockwise rotate the cover to close it securely.
5.2. Cleaning
Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or immerse the device in water, as it is not waterproof.
6. Troubleshooting
- Device not connecting: Ensure the sensor is within range of your Zigbee gateway. Verify the gateway is powered on and connected to the internet. Re-attempt the pairing process by pressing the reset button for 3 seconds.
- No notifications: Check your smartphone's notification settings for the Smart Life/Tuya app. Ensure the app has permission to send notifications. Verify the sensor's battery level.
- False alarms or missed detections: Adjust the sensitivity settings in the app (refer to section 4.3). Experiment with different sensitivity levels (L to H) to find the optimal setting for your environment.
- Compatibility: The sensor requires a Zigbee gateway. It is compatible with Tuya and Smart Life platforms, and generally works with other standard Zigbee2MQTT (Z2M) and Home Assistant setups.
- Water Exposure: The device is not waterproof. Avoid exposing it to water or high humidity environments.
7. Product Specifications
| Parameter | Value |
|---|---|
| Product Name | Zigbee Vibration Sensor |
| Wireless Protocol | Zigbee3.0 |
| Acceleration Range | ±2g |
| Tilt Alarm | ±10° |
| Working Voltage | 3V |
| Battery Type | CR2450 |
| Standby Current | ≤10uA |
| Standby Time | >15 Months |
| Working Temperature | -10°C to 55°C |
| Working Humidity | 0% to 99% RH |
| Product Size | Ø40 × 13mm |
| Certifications | CE, FCC, UL |
| Smart Home Platform | Tuya |
8. User Tips
- This sensor is highly effective for monitoring garage doors, providing instant alerts for opening or closing.
- Many users find it useful for detecting activity on appliances like washers and dryers, enabling smart automations.
- Consider placing the sensor in your mailbox to receive notifications when it's opened.
- It can be used for doorbell monitoring, alerting you to knocks or movements.
- The sensitivity is adjustable and can be calibrated within the app to suit various applications, from detecting subtle vibrations to significant shocks.
- While highly sensitive, the sensor does not support location-based activation/deactivation directly. Automations for this would need to be configured within your smart home system.
9. Warranty and Support
For any issues, questions, or support needs regarding your Coolo Zigbee Smart Vibration Sensor, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims, if applicable. Specific warranty terms may vary by region and seller.