1. Introduction
This manual provides clear instructions for the proper installation and maintenance of Heloxyo HEPA filter elements for your iRobot Roomba vacuum cleaner. Following these guidelines ensures optimal filtration performance, proper sealing, and safe operation of your device.
2. Safety Information
Warnings:
- Always power off and unplug the vacuum cleaner from its charging base before attempting any installation or maintenance.
- Do not operate the vacuum cleaner without the filter correctly installed.
- Do not modify, damage, or attempt to repair the filter. Replace it with a new one if damaged.
Product Use Limitations:
- These filters are designed for dry household use only.
- Do not expose the filter to liquids or attempt to wash it.
- Install the filter only in the designated filter compartment of your compatible iRobot Roomba model.
3. Product Overview
Heloxyo HEPA filters are designed to capture fine dust and allergens, maintaining the strong suction performance of your iRobot Roomba. They feature a multi-layer structure and a solid frame for effective filtration.

Figure 1: Heloxyo HEPA Filter Features (99% Filtration, Solid Frame, HEPA Nonwoven Filter, No Washing)
Filtration Performance:
- High-Efficiency Filtration: Constructed with a multi-layer structure to effectively capture fine dust, pet hair, wood debris, fallen leaves, food residues, and carpet dust.
- 99% Filtration: Designed to maintain strong suction performance comparable to original filters.

Figure 2: Filtration Capabilities of Heloxyo HEPA Filter
4. Compatibility
These high-efficiency replacement filters are designed to fit a wide range of iRobot Roomba models. Please confirm your filter size by comparing your original filter with the dimensions provided in the specifications section to ensure proper compatibility.
Compatible Models:
- Roomba E Series: E5 (E5134), E6 (E6198), E7
- Roomba I Series: i7 (7150), i7+ / Plus (7550), i1+ (1552), i3+ (3550), i4+ (4550/4552), i5 / Plus, i6+ (6550), i8+ (8550)
- Roomba J Series: J5 Plus Combo, J9 Plus Combo
Not Compatible With:
- Roomba Combo J9
- Roomba Combo J7
- Roomba 10 Max

Figure 3: Visual Guide to Compatible Roomba Models
5. Installation Instructions
Replacing your Roomba's filter is a simple process. Follow these steps for correct installation:
- Step 1: Power Off - Ensure your iRobot Roomba is powered off and disconnected from its charging base.
- Step 2: Open Compartment - Locate and open the dust bin compartment on your Roomba. Remove the dust bin from the robot.
- Step 3: Remove Old Filter - Open the dust bin to access the filter. Remove the old filter by pulling it out. Discard the old filter responsibly.
- Step 4: Insert New Filter - Insert the new Heloxyo HEPA filter firmly into the designated slot within the dust bin. Ensure it sits flat with no gaps and makes full contact with the sealing edge.
- Step 5: Reassemble - Close the dust bin and reinsert it into your Roomba until it clicks into place.
Correct Installation Check:
- The new filter should sit flat within the dust bin with no visible gaps.
- The sealing edge of the filter should fully contact the housing.
- After reassembling and powering on your Roomba, normal suction should be observed.

Figure 4: Visual Guide for Filter Installation
6. Operating Your Roomba with New Filters
Once the new Heloxyo HEPA filter is correctly installed, your iRobot Roomba is ready for operation. The filter works continuously during cleaning cycles to trap dust, allergens, and debris, ensuring cleaner air and floors. No special operating procedures are required beyond your Roomba's standard usage.
7. Maintenance
Recommended Maintenance Cycle:
For optimal operation, airflow, and filtration efficiency, it is recommended to replace the HEPA filter every 2–3 months. This interval may vary depending on your Roomba's usage frequency, the presence of pets, and the general dustiness of your environment. For intensive cleaning, some users find replacement every month beneficial.
Filter Cleaning:
These filters are designed as "no washing" components. Do not attempt to wash the filter with water or any cleaning solutions, as this can damage the filtration material and reduce its effectiveness. For light maintenance between replacements, you may gently tap the filter against a waste bin to dislodge accumulated dust, as shown in the installation guide.
8. Troubleshooting
If you encounter issues after installing a new filter, refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Loose Filter | The filter may not be seated correctly. Remove the filter and reinstall it firmly, ensuring it clicks into place and sits flat. |
| Reduced Suction | Check the filter's orientation and ensure it is fully seated. A clogged filter can also reduce suction; replace if it's past its recommended lifespan. |
| Air Leakage | Confirm that the filter's sealing edge is properly aligned and making full contact with the dust bin housing. Reinstall the filter if necessary. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Heloxyo |
| Type | HEPA Filter (Vacuum Part) |
| Material | PP, Non-woven fabrics |
| Dimensions (Approx.) | Width: 1.96 in (5 cm) Length: 2.4 in (6.1 cm) Height: 0.79 in (2 cm) |
| Filtration Efficiency | 99% |
| Maintenance | No washing required |

Figure 5: Heloxyo HEPA Filter Dimensions
10. User Tips
- Easy Installation: Many users find these filters very easy to install, often requiring no tools.
- Regular Checks: Periodically check your filter for excessive dirt buildup, especially if you notice a decrease in suction power.
- Intensive Use: If your Roomba operates frequently or in dusty environments, consider replacing the filter monthly for optimal performance.
11. Frequently Asked Questions (FAQ)
Q: Can this filter be used with iRobot Roomba J5?
A: Yes, this filter is compatible with the iRobot Roomba J5 Plus Combo model.
12. Warranty and Support
For any issues or questions regarding your Heloxyo HEPA filters, please contact your retailer or the manufacturer's customer support. If you encounter any issues, our support team is ready to assist with a prompt solution within 24 hours.