Car Accessory Air Conditioner Outlet Clip

Contents

Air Conditioner Outlet Clip for Tesla Model 3/Y

User Manual

1. Safety & Warnings

Please read all instructions carefully before using this product. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep this device out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

2. Product Overview

This product is an air conditioner outlet clip designed for Tesla vehicles, allowing for the secure attachment of small aromatherapy diffusers. It ensures fragrance is emitted with the airflow without obstructing the original vehicle's air outlet.

Three aromatherapy diffusers installed in a Tesla car vent

Figure 1: Aromatherapy diffusers installed in the car vent using the clips.

3. Setup & Installation

The air conditioner outlet clip is designed for easy installation. Please identify the correct clip type for your Tesla model before proceeding.

3.1 Compatibility Check

Diagram showing two types of clips and their compatibility with Tesla models

Figure 2: Choose the clip that fits your Tesla model.

  • Clip Type 1 (U-shaped): Applicable to Tesla Model Y and older Model 3 (excluding Model 3 from 2023 onwards).
  • Clip Type 2 (L-shaped): Applicable to Tesla Model 3 from 2023 to the present (including Model 3 Highland).

3.2 Installation Steps

  1. Identify the air outlet slot in your Tesla's dashboard.
  2. Gently insert the appropriate clip into the air outlet slot. Ensure it sits snugly.
  3. If the clip feels loose or has noticeable wobbling, proceed to the 'Troubleshooting' section for a solution using sponge pads.
  4. Once the clip is securely in place, you can attach your preferred back-clip type small aromatherapy diffuser to it.

Video 1: Demonstration of clip installation and aromatherapy attachment.

Hand inserting the L-shaped clip into a Tesla car vent

Figure 3: Inserting the clip into the air vent.

4. Operating Instructions

Once installed, the clip securely holds your aromatherapy diffuser. The diffuser will emit fragrance as air flows through the vent, providing a pleasant scent in your vehicle. The small, mini design ensures it does not obstruct the normal air outlet function.

5. Maintenance

To maintain your air conditioner outlet clip, simply wipe it with a soft, damp cloth as needed. Avoid using harsh chemicals or abrasive cleaners, as these may damage the ABS material.

6. Troubleshooting

6.1 Clip is Loose in the Vent

If the clip feels loose or wobbles significantly when inserted into the air outlet, you can use sponge pads to create a tighter fit.

  1. Remove the clip from the air outlet.
  2. Attach the provided sponge pasters (or similar thin adhesive pads) to the contact surfaces of the clip that sit against the vent.
  3. Re-insert the clip into the air outlet. The added thickness from the sponge pads should provide a more secure fit.
Image of a clip with an inset showing sponge pasters

Figure 4: Use sponge pasters for a tighter fit if the clip is loose.

7. Specifications

Product NameAir Conditioner Outlet Clip
Item TypeFastener & Clip / Car Accessories
MaterialABS
ColorBlack
FitmentTesla Model 3/Y, Model 3 Highland 2023-2024
Dimensions (L-shaped clip)4.5 cm (1.77 in) x 3 cm (1.18 in)
Dimensions (U-shaped clip)3.5 cm (1.38 in) x 1.7 cm (0.67 in) x 1.3 cm (0.51 in)
Diagram showing dimensions of the L-shaped clip

Figure 5: Dimensions of the L-shaped clip.

8. User Tips

  • Always ensure the clip is firmly seated in the vent to prevent it from falling out, especially when driving over bumps.
  • If you notice any looseness, utilize the included sponge pasters for a more secure fit as described in the Troubleshooting section.
  • When attaching aromatherapy, ensure it is a back-clip type that is compatible with the clip's design for optimal stability.

9. Warranty & Support

For any product quality or infringement issues, please contact the manufacturer directly. As an EC representative, we are not involved in the manufacture, import, or sale of the product and are not responsible for after-sales services.

Manufacturer Information:

  • Company Name: Room B675, 4th Floor, No. 11 Tandong East Road, Tianhe District, Guangzhou City, Guangdong Province, China
  • E-Mail: 1154365941@qq.com
  • Telephone: +86-15015751086

EU Authorized Representative:

  • Company Name: EC REP SERVICES SL
  • Address: CALLE GRAN VIA 49, 7 DCH.
  • E-Mail: ecrepservice@hotmail.com
  • Telephone: +0034682797075
EC REP compliance information

Figure 6: EC Representative Information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.