1. Introduction
This manual provides detailed instructions for the installation and operation of your DRAGON GAUGE 52mm Digital Display Gauge. This advanced automobile instrument features a digital graphics dual display with switchable red and blue backlighting. It is designed to measure and display various critical data for your vehicle.
2. Safety Information
- Always disconnect the vehicle's battery before performing any electrical work.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Do not attempt to modify the gauge or its components, as this may void the warranty and cause damage.
- Consult a professional automotive technician if you are unsure about any installation steps.
- This product is designed for 12-volt gasoline vehicles only. The tachometer function is specifically for 4, 6, or 8-cylinder cars.
3. Package Contents
Depending on the specific gauge purchased, your package may include:
- 52mm Digital Display Gauge (Tachometer, Boost, Vacuum, Water Temp, Oil Temp, Oil Press, Exhaust Temp, Voltmeter, or Air Fuel Ratio)
- Relevant sensor(s) (e.g., Boost sensor, Water Temp sensor, Oil Temp sensor, Oil Press sensor, Exhaust Temp sensor). Note: Air-fuel ratio gauge does not include a sensor; a narrow band oxygen sensor must be purchased separately.
- Wiring harness
- Mounting bracket and hardware
- User Manual (English)




4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | DRAGON GAUGE |
| Model Number | 625-EVO |
| Material | Metal+Plastic+LCD |
| Item Weight | 0.35kg |
| Item Dimensions (L x W x H) | 57mm x 52mm x 57mm |
| Power Supply | 12V (for gasoline vehicles) |
| Tachometer Range | 0~10 x 1000 RPM (for 4/6/8 cylinder cars) |
| Boost Gauge Range | -30~35 PSI |
| Vacuum Gauge Range | -1~0 Bar |
| Water Temperature Gauge Range | 40~140℃ |
| Oil Temperature Gauge Range | 50~150℃ |
| Oil Pressure Gauge Range | 0~150 PSI |
| Voltmeter Range | 8~18V |
| Air Fuel Ratio Gauge Range | 20:1~10:1 (requires separate narrow band oxygen sensor) |
| Exhaust Temperature Gauge Range | 2~12 x 100℃ |
5. Installation and Setup
Careful installation is crucial for proper function and safety. Refer to the specific wiring diagrams below for your gauge type. The sensor thread size is 1/8ZG.
General Wiring Instructions:
- Yellow Wire: Connect to the headlight switch (12V switch power).
- White Wire: Connect to engine accessory power.
- Red Wire: Connect to 12V accessory power (+).
- Black Wire: Connect to ground negative (-).
- Green Wire: Sensor signal input.
- Orange Wire: Connect to ACC power for lighting.
Specific Wiring Diagrams:
The following diagrams illustrate the wiring for each specific gauge type. Please identify your gauge and follow the corresponding diagram carefully.




6. Operating Instructions
Backlight Switching:
The gauge features a dual-color backlight (red and blue). There are two dedicated light lines in the wiring harness. Connecting these lines will illuminate the display in the corresponding color (red or blue). You can wire these to a switch or to different power sources to select your preferred backlight color.
Display Operation:
Once properly installed and powered, the gauge will automatically display the measured data. The digital display provides precise readings, while the graphical elements offer a quick visual reference.
Video demonstrating the gauge's red and blue backlight functionality.
7. Maintenance
- Keep the gauge clean using a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Regularly check all wiring connections for tightness and signs of wear or corrosion.
- Ensure sensors are free from debris and properly seated.
8. Troubleshooting
- Gauge not powering on: Check power connections (Red and White wires) and ground connection (Black wire). Ensure the ignition is on if wired to accessory power.
- Incorrect readings: Verify sensor connections (Green wire) and ensure the correct sensor is installed for the specific gauge. For tachometers, confirm compatibility with your engine's cylinder count (4/6/8 cylinder).
- Backlight not working or incorrect color: Check the connections for the backlight wires (Yellow and Orange).
- Air Fuel Ratio Gauge not working: Ensure a compatible narrow band oxygen sensor is correctly installed and wired, as this gauge does not include its own sensor.
9. User Tips
- Pay close attention to the wiring diagrams, especially for positive, accessory, and backlight connections, to avoid confusion during installation.
- While generally easy to install, double-check all connections to prevent issues like sparks or inaccurate readings, particularly for RPM gauges at higher engine speeds.
- Consider professional installation if you are not confident with automotive electrical systems.
10. Frequently Asked Questions
- Does the gauge have an alarm for out-of-parameter readings?
No, this product does not feature an alarm function to notify when readings are outside specified parameters. - Is a fuel pressure gauge available in this digital red model?
A fuel pressure gauge is not listed among the available types for this model. - Can the oil pressure display be changed to Bar instead of PSI?
The oil pressure gauge displays in PSI (0-150 PSI) as per specifications; there is no mention of a Bar display option. - Is this product water resistant for motorcycle use?
The product specifications do not indicate water resistance. These gauges are typically designed for interior automotive use.
11. Warranty and Support
For any issues, questions, or support needs regarding your DRAGON GAUGE product, please contact the seller directly through the platform where you made your purchase. They can provide assistance with troubleshooting, parts, or warranty claims.
A PDF version of the user manual may also be available for download from the product page: View User Manual (PDF)