LEXXSON Becker Upgrade Box

Contents

LEXXSON Wireless CarPlay & Android Auto Upgrade Kit

User Manual for Mercedes-Benz NTG4.5 Becker Module

1. Safety Instructions

To avoid risk of serious injury or possible violation of laws, please read the following thoroughly before installation or connecting.

  • Be sure to use specified accessory parts and install them securely.
  • Do not damage wiring. Failure to do so may result in electric shock or fire due to electrical shorts.
  • Do not install in locations with high moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

2. Product Description

This upgrade kit is specifically designed for Mercedes-Benz NTG 4.5 Systems. It provides wireless CarPlay and Android Auto functionality without replacing your car's original radio. This transforms your car radio from a "single function" to a "multi-function" system, offering wireless CarPlay, wireless Android Auto, a Mirroring function, and camera mode. The system connects automatically when you enter the car, enhancing driving safety and convenience.

For a detailed user manual in PDF format, please refer to the official document: User Manual (PDF).

3. Package Contents

The package includes the following items:

  • LEXXSON Becker Upgrade Box (Main Module)
  • USB Cable
  • AUX Cable
  • Power/CAN Bus Harness
  • Video Input Cables (for reversing camera)
LEXXSON Wireless CarPlay Android Auto Module and Cables
Image: Main module and included cables.

4. Setup and Installation

4.1. Compatibility Check (NTG4.5 vs NTG4.7)

It is crucial to confirm your Mercedes-Benz vehicle has the NTG4.5 system, as this kit is specifically designed for it. NTG4.5 systems are typically found in models from 2011-2015.

  • NTG4.5: Has a HARMAN BECKER slot in the glove box on the passenger side. It also features an LVDS port.
  • NTG4.7: Does NOT have a HARMAN BECKER slot.
Identifying NTG4.5 vs NTG4.7 system in Mercedes-Benz
Image: Visual guide to distinguish NTG4.5 from NTG4.7 systems by checking for the HARMAN BECKER slot and LVDS port.

4.2. Physical Installation

The module is designed for a plug-and-play installation into the HARMAN-BECKER socket.

  1. Locate the HARMAN-BECKER socket in your vehicle's glove box (passenger side).
  2. Simply align the LEXXSON Becker Upgrade Box with the socket.
  3. Gently push the module into the HARMAN-BECKER socket until it is securely seated.
Plugging the module into the HARMAN-BECKER socket
Image: Step-by-step diagram showing how to align and plug the module into the HARMAN-BECKER socket.

4.3. Wiring Connections

Connect the provided cables as per the diagram below. Ensure all connections are secure.

Detailed wiring diagram for LEXXSON CarPlay module
Image: Detailed wiring diagram for the module, including dimensions, dial functions, connection steps, USB expansion, and specific wiring for AUX, camera, and power.

Module Dimensions: Approximately 3.15 inches x 3.15 inches x 0.9 inches.

Dial Functions on Module:

  • Dial 1: Used to turn on/off the audio Bluetooth.
  • Dial 2: Invalid (no function).

Wiring Details:

  • USB Expansion: Connect the USB cable to your mobile phone for CarPlay/Android Auto or to a U disk for media playback and software upgrades.
  • AUX Connection: Connect the AUX cable to the original car's AUX input. This is crucial for audio output.
  • Camera Input: Connect the reversing video input cable for aftermarket rear view cameras.
  • Power (ACC): Connect the ACC wire to a 12V accessory power source.

5. Operating Instructions

5.1. Initial Bluetooth Connection (MB Bluetooth)

Before using any wired or wireless connection for CarPlay/Android Auto, you must first connect your phone to the car's original Mercedes-Benz (MB) Bluetooth system.

  1. On your car's stereo, turn on Bluetooth audio and select "Connect via BT audio device".
  2. On your smartphone, go to Bluetooth settings and pair with "MB Bluetooth". Ensure it shows as "Connected".

Refer to your car's manual for specific steps on accessing and pairing with MB Bluetooth.

5.2. Entering the Becker Interface

After the initial MB Bluetooth connection:

  1. Press the "NAVI" button on your car's control panel to enter the Becker interface.
  2. You will see options for CarPlay, Android Auto, Bluetooth, and Settings.

5.3. Module Bluetooth Settings

Within the Becker interface:

  1. Click the "Bluetooth" icon.
  2. Select "Auto Connect" to enable automatic connection to the module's Bluetooth (named "BK-xxxx").

5.4. Wireless CarPlay

To use wireless CarPlay:

  1. On your iPhone, turn on Wi-Fi and Bluetooth.
  2. In the Becker interface, click the "CarPlay" icon.
  3. On your iPhone, go to Bluetooth settings and pair with the device named "BK-xxxx".
  4. Once paired, allow all permissions requested on your iPhone.
  5. Tap "Use CarPlay" when prompted.
  6. Your iPhone will connect to wireless CarPlay within a few seconds.

5.5. Wireless Android Auto

To use wireless Android Auto:

  1. On your Android phone, turn on Wi-Fi and Bluetooth.
  2. In the Becker interface, click the "Android Auto" icon.
  3. On your Android phone, go to Bluetooth settings and pair with the device named "BK-xxxx".
  4. When prompted on your phone, tap "Pair-Allow" for notifications.
  5. Your Android phone will connect to wireless Android Auto within a few seconds.

5.6. Wired CarPlay & Android Auto

For wired connections:

  1. Ensure your phone is already paired with the car's factory MB Bluetooth (as per section 5.1).
  2. Connect your phone's data cable to the USB port on the Becker module.
  3. The system will automatically enter the corresponding CarPlay or Android Auto interface.

5.7. Steering Wheel Button Control

The module supports control via your vehicle's steering wheel buttons:

  • Siri Voice Control: Activate Siri.
  • Volume Up/Down: Adjust audio volume.
  • Short Press to Answer: Answer incoming calls.
  • Short Press to Hang Up: End calls.

5.8. Rear View Camera

The Becker module supports the installation of CVBS format aftermarket rear view cameras. If your car already has a factory rear view camera, this input cannot be used to add another one.

Connect the camera's video output to the "back video in" RCA input on the module's harness. Ensure the camera's trigger wire is connected correctly for automatic display when reversing.

6. Troubleshooting

6.1. CarPlay/Android Auto Works But No Sound

If CarPlay or Android Auto is displayed but there is no audio:

  • Check Bluetooth Connection: Ensure your phone is still connected to "MB Bluetooth" (the car's original Bluetooth). If the connection is lost, re-pair it.
  • Check Audio Source: On your phone, verify the audio output source. It should be set to "MB Bluetooth". Disconnect any other Bluetooth devices that might be interfering.
  • Car AUX Input: Ensure your car's audio system is set to the AUX input. The module outputs audio through the car's AUX channel.

6.2. Cannot Enter CarPlay/Android Auto Interface After Pairing Bluetooth

If you've paired Bluetooth and allowed permissions but cannot access the CarPlay/Android Auto interface:

  • Reset Module: In the Becker box interface, go to "Settings" > "System" > "Factory reset" to reset the module.
  • Reset Phone Network Settings: On your mobile phone, reset its network settings. This often resolves connectivity issues.
  • Contact Support: If the issue persists, please contact your dealer or after-sales service for further assistance.

7. Specifications

FeatureSpecification
Operating Voltage5V
Operating Temperature-30°C to +75°C
Stored Temperature-30°C to +85°C
Power Consumption1A (rated), 3A (Max)
Environment Humidity≤98% (at 45°C), 65±5% (rated)
Shutdown Current300mA (Clock is on)
Quiescent CurrentLess than 3mA
Charging Current≤2A. If USB charging current >1A, unit activates circuit protection to control current below 1.5A to prevent product damage.

8. User Tips

  • Audio Output: Always ensure your car's audio source is set to AUX for sound from CarPlay/Android Auto. Many audio issues stem from incorrect source selection.
  • Stable Connection: For the most stable connection, ensure your phone's operating system is up-to-date (iOS 10+ or Android 11+).
  • Troubleshooting Audio: If you experience no audio, double-check that your phone is connected to the car's original "MB Bluetooth" and not just the module's "BK-xxxx" Bluetooth for audio routing.

9. Warranty and Support

LEXXSON products undergo strict functional and performance tests to ensure quality. All products are covered by standard vehicle electronics guarantees.

If you encounter any problems while using this product, please contact your dealer or the point of purchase for support and warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.