NMEA 2000 16192200226

Contents

NMEA 2000 N2K Male Power Cable User Manual

Model: 16192200226

1. Product Overview

This manual provides instructions for the NMEA 2000 N2K Male Power Cable, designed for reliable connection and power distribution within NMEA 2000 marine networks. This cable is essential for establishing the backbone of your NMEA 2000 system.

Key Features:

  • Type: NMEA 2000 N2K Male Power Cable
  • Connector: 5-Pin Male
  • Length: 1 meter (approximately 39.4 inches)
  • Integrated Fuse: Provides circuit protection for the network.
  • Material: High-quality ABS plastic, oil-resistant, sturdy, and durable.
  • Application: Compatible with NMEA 2000 certified networks, Lowrance, Simrad, B&G, and Navico networks.
NMEA 2000 power cable with integrated fuse
Figure 1: NMEA 2000 Power Cable with Integrated Fuse

2. Safety Information

WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children.

Always ensure all connections are secure and free from moisture to prevent electrical hazards. Do not modify the cable or its components.

3. Setup and Installation

This cable is specifically designed for proper termination and powering of NMEA 2000 networks and their backbone. It is NOT a power cable for any particular standalone device; its function is to power the NMEA 2000 network itself.

Installation Steps:

  1. Identify Connection Points: Locate the power input port on your NMEA 2000 backbone or power distribution block.
  2. Connect the Cable: Insert the 5-pin male connector of this cable into the corresponding female port on your NMEA 2000 backbone. Ensure a firm and secure connection.
  3. Power Source Connection: The red and black wires extending from the fuse holder are for connecting to your vessel's 12V DC power supply (red to positive, black to negative). Ensure these connections are made to a fused circuit on your vessel's electrical system.
  4. Verify Fuse: The cable includes an inline fuse for protection. Ensure the fuse is correctly seated in its holder before applying power.
Close-up of 5-pin male NMEA 2000 connector
Figure 2: 5-Pin Male NMEA 2000 Connector
Close-up of inline fuse holder
Figure 3: Inline Fuse Holder

4. Operating Instructions

Once properly installed and connected to a 12V DC power source, the cable will supply power to the NMEA 2000 network backbone. Ensure all devices connected to the network are functioning as expected. No further operational steps are required for the cable itself beyond maintaining its connection.

5. Maintenance

  • Inspection: Periodically inspect the cable for any signs of wear, cuts, or damage to the insulation or connectors.
  • Cleaning: Keep the connectors clean and free from dirt, salt, and moisture. Use a marine-grade dielectric grease on connectors to prevent corrosion.
  • Fuse Check: If the NMEA 2000 network loses power, check the inline fuse. Replace it with a fuse of the same type and rating if blown.
  • Storage: If the cable is removed for storage, ensure it is kept in a dry, cool place away from direct sunlight and harsh chemicals.

6. Troubleshooting

  • No Power to Network:
    • Check the inline fuse. Replace if blown.
    • Verify the 12V DC power connections (red to positive, black to negative) are secure and receiving power from the vessel's battery.
    • Ensure the 5-pin connector is fully seated in the NMEA 2000 backbone.
  • Intermittent Network Issues:
    • Inspect all connections for corrosion or looseness.
    • Check the cable for any physical damage.

7. Specifications

Product NameFor NMEA 2000 N2K Male Power Cable with Fuse 5 Pin 1m/39.4in Long for Networks
Model16192200226
Batch/Serial NumberALI4387892763
MaterialABS Plastic
Total LengthApprox. 1m / 39.4in
Connector Type5 Pin Male
ApplicationNMEA 2000 certified, Lowrance Networks, Simrad Networks, B&G Networks, Navico Networks
FeaturesIntegrated Fuse, Oil Resistant

8. User Tips

No specific user tips were available from customer reviews or Q&A for this product.

9. Warranty and Support

For warranty information or technical support, please contact your point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer Information:

  • Company Name: Huizhou City Xinchengda Glass Mirror Co., Ltd.
  • Full Address: Huacaodi Section, Cunwei Group, Heshan Village, Yuanzhou Town, Boluo County
  • Email: 351692025@qq.com
  • Telephone: 86-15920696512

EU Authorized Representative:

  • Company Name: Kequ Technology s.r.o.
  • Full Address: Pražákova 1008/69, Štyřice, 63900 Brno, South Moravian Region, Czech Republic
  • Email: christopher25106@outlook.com
  • Telephone: 420-123456789

A PDF version of this user manual may also be available from the seller or manufacturer.

© 2024 All Rights Reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.