Important Safety Instructions
Please read all safety warnings and instructions carefully before using this product to ensure proper use and trouble-free operation. Keep this manual for future reference.
- For the first use, it is recommended to fully charge the speaker.
- Use and store the product at room temperature.
- Do not expose the product to fire, high temperatures, direct sunlight, or other extreme conditions.
- Keep the speaker volume at a moderate level to avoid temporary or permanent hearing impairment.
- Do not use organic solvents or other chemicals to clean the product. Use a soft, dry cloth.
- Prevent small particles or liquids from entering the product.
- Do not disassemble, repair, or modify the product structure or any of its parts. Unauthorized modifications will void the warranty.
- Battery safety: If the battery is not replaced correctly, there is a risk of explosion. Only replace with the same type of battery. Do not expose the battery (or battery pack) to direct sunlight, fire, or similar overheating conditions.
- Avoid throwing or dropping the product to prevent damage.
- Keep the product out of reach of children.
1. Setup
1.1 Packing Contents
Please check the package for the following items:
- ZEALOT-S64 Wireless Speaker x1
- USB-C Charging Cable x1
- Quick Start Guide x1
1.2 Charging the Speaker
Before first use, fully charge your ZEALOT-S64 speaker.
- Connect the USB-C end of the charging cable to the speaker's USB-C port.
- Connect the other end of the USB-C cable to a DC 5V power source (e.g., a USB wall adapter, computer USB port).
- The charging indicator light will show the charging status (refer to the Quick Start Guide for specific light behavior).
- Once fully charged, disconnect the charging cable.
Note: If using a power adapter, ensure it is certified and meets standard safety requirements.
1.3 Powering On/Off
- To Power On: Press and hold the Power button (usually marked with a circle and a vertical line) for a few seconds until you hear an audible prompt or see the indicator lights activate.
- To Power Off: Press and hold the Power button again for a few seconds until you hear an audible prompt or the indicator lights turn off.
2. Operating Instructions
2.1 Wireless Connection (Bluetooth)

Connect your devices seamlessly with Bluetooth 5.2 technology.
- Power on the ZEALOT-S64 speaker. It will automatically enter Bluetooth pairing mode (indicated by a flashing LED light).
- On your smartphone, tablet, or other Bluetooth-enabled device, go to the Bluetooth settings.
- Search for available devices and select "ZEALOT-S64" from the list.
- Once connected, the speaker will provide an audible confirmation, and the LED light will stop flashing.
2.2 Mode Switching
Press the "M" button (Mode button) to cycle through the available playback modes:
- Wireless (Bluetooth) Mode: For streaming audio from your paired device.
- TF Card Mode: For playing music directly from a microSD/TF card inserted into the speaker's slot.
- USB Mode: For playing music directly from a USB flash drive inserted into the speaker's USB port.
- AUX Mode: For playing audio from devices connected via a 3.5mm audio cable (not included) to the AUX input port.
2.3 Playback Controls
Use the buttons on the top panel of the speaker to control your music:
- Play/Pause: Press the Play/Pause button (triangle/two vertical bars icon) to play or pause the current track.
- Volume Up: Short press the "+" button.
- Volume Down: Short press the "-" button.
- Next Track: Press and hold the "+" button.
- Previous Track: Press and hold the "-" button.
2.4 Light Modes (RGB)

Enhance your listening experience with dynamic RGB lighting.
- Turn Lights On/Off: Press the Light button (light bulb icon) to toggle the RGB lights on or off.
- Switch Light Modes: While the lights are on, press the Light button repeatedly to cycle through different lighting effects.
2.5 Equalizer (EQ) Settings
Customize your audio profile:
- Press the "EQ" button to cycle through different sound modes:
- Voice Mode: Optimized for clear vocals.
- Bass Mode: Enhanced bass for a deeper sound.
- Normal Mode: Balanced sound profile.
2.6 Party Add (True Wireless Stereo - TWS) Pairing
Connect two ZEALOT-S64 speakers for a true stereo sound experience:
- Ensure both ZEALOT-S64 speakers are powered on and are not connected to any Bluetooth device.
- On one of the speakers (this will be the primary speaker), press and hold the Party Add button (often indicated by a TWS icon or two interlocking circles).
- The speakers will automatically search for and pair with each other. You will hear an audible confirmation once they are successfully paired.
- Once TWS is established, connect your Bluetooth device to the primary speaker (the one you initiated TWS pairing on). Audio will now play in stereo across both speakers.
3. Maintenance
- Cleaning: Use a soft, dry, lint-free cloth to clean the speaker. Do not use abrasive cleaners, solvents, or chemicals, as these may damage the surface or internal components.
- Storage: When not in use, store the speaker in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity.
- Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Recharge it when the battery is low. If storing for a long period, charge the speaker to about 50% every few months.
4. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not power on. | Ensure the speaker is charged. Connect it to a power source and try again. |
| No sound from the speaker. | Check the volume level on both the speaker and your connected device. Ensure the correct playback mode (Bluetooth, TF, USB, AUX) is selected. |
| Bluetooth connection is unstable or disconnects. | Ensure your device is within the 10-meter range of the speaker. Avoid obstacles between the speaker and your device. Try re-pairing the device. |
| Cannot connect two speakers for TWS. | Ensure both speakers are not connected to any other Bluetooth devices. Power them off and on, then try the TWS pairing process again. Make sure they are close to each other. |
| USB/TF card playback not working. | Ensure the USB drive or TF card is inserted correctly and contains compatible audio files (e.g., MP3). Switch to the correct mode (USB or TF). |
| Poor sound quality. | Try adjusting the EQ settings. Ensure the audio source is of good quality. Move closer to the speaker if using Bluetooth. |
5. Specifications

Engineered for powerful and clear audio performance.
| Feature | Specification |
|---|---|
| Wireless Version | Bluetooth 5.2 |
| Charging Voltage | DC 5V |
| Working Voltage | 7.4V |
| Transmission Distance | Up to 10 meters (33 feet) |
| Frequency Range | 20Hz - 20KHz |
| Speaker Configuration | Φ93mm*1 + Φ40mm*2 |
| Signal-to-Noise Ratio (SNR) | ≥85dB |
| Distortion | <1% |
| Battery Capacity | 14400mAh |
| Input Power (PMPO) | 50W |
| Waterproof Rating | IPX6 |
| Weight | 1600g |
| Dimensions (L x W x H) | 150 x 150 x 173mm |
6. User Tips
- Stereo Immersion: For an enhanced audio experience, consider purchasing a second ZEALOT-S64 speaker and utilize the TWS (Party Add) feature for true stereo sound. Users report this significantly doubles the enjoyment.
- Bass Performance: This speaker is noted for its fantastic sound quality and really good bass for its size. Experiment with the EQ settings to find your preferred sound profile.
- Optimal Bluetooth Range: While rated for 10 meters, some users find that keeping your connected device within 4-5 meters provides the most stable Bluetooth signal, especially in environments with interference.
- Long Playtime: The ZEALOT-S64 offers up to 20 hours of playtime on a single charge, making it ideal for extended listening sessions.
7. Warranty and Support
This product is covered by a manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.
If you encounter any issues or have questions not covered in this manual, please contact the seller or manufacturer's customer support for assistance.
For additional detailed instructions and diagrams, you may refer to the official user manual PDF: View User Manual (PDF)
