1. Product Overview and Features
This device integrates Wireless Apple CarPlay and Android Auto into your vehicle's existing infotainment system without requiring screen replacement. It enhances your driving experience with modern connectivity features.
Key Features:
- Supports Wireless Apple CarPlay, Carlife, and Android Auto.
- Supports wireless phone mirroring (phone-link).
- Equipped with Sunplus SPHE8368-U 800MHz chip, 128MB DDRIII SDRAM, and 128MB SLC NAND FLASH for stable performance.
- Linux operating system for high performance and stability.
- Ultra-compact design ($60*39*6mm$) with rich connectors for easy integration and expansion.
- Enables navigation, voice search, Bluetooth functions, and music playback on the original screen.
- Supports multi-format video output (Analog CVBS, LVDS HD, Digital RGB888).
- Provides two channels of CD stereophonic sound output.
- Retains original car operating system and controls.
- Utilizes original MIC for high-quality sound and echo control.
- Smooth 1080P multi-format video playback (including H.264).
- Includes 1 group USB-HOST connection.
- UART connector for touch screen and button operation.
- Supports extended reverse video input (CVBS or AHD HD), front view camera, and DVR.

Figure 1: Main product features including CarPlay, Android Auto, Mirroring, and Navigation.

Figure 2: Demonstration of rear view video input support (CVBS signal).

Figure 3: Various interface modes: CarPlay, Android Auto, AirPlay, and Autolink.

Figure 4: Key functions including Navigation, Siri Control, Screen Mirroring, Phone Calls, Online Music Play, and USB Flash Play.
Video 1: Demonstration of Wireless CarPlay functionality in a car, showcasing music playback, navigation, and phone call features.
2. Compatible Models
This device is designed for specific Land Rover and Jaguar models equipped with a Bosch system and 7-inch or 8-inch screens. It is NOT compatible with Harman Host systems.

Figure 5: Compatible Model List and visual guide to identify Bosch vs. Harman host systems.
Applicable Models (Bosch System, 7inch/8inch Screen):
- Discovery 4: 2011–2016
- Evoque: 2011–2016
- Freelander 2: 2011–2015
- XE: 2012–2016
- XJL: 2011–2016
- F-TYPE: 2012–2016
- Range Rover: 2011–2017
- XF: 2012–2016
- F-PACE: 2015–2016
Important: Verify your car has a Bosch host. Bosch hosts typically display time on the right side of the screen, while Harman hosts display it in the middle.
3. Package Contents
Please check the package for the following items:

Figure 6: Product dimensions and visual representation of included cables.
- Host Unit: Main decoder box (Size: $140 imes 105 imes 25mm$ L*W*H)
- LVDS Cable: For video signal connection.
- WI-FI Antenna: For wireless connectivity.
- Power Cable: For power supply.
- RCA/USB Cable: For audio/video input and USB media.
4. Installation Instructions
Installation involves connecting the decoder unit to your car's existing wiring harness and display. It is recommended to have this installed by a professional or someone experienced with car electronics.

Figure 7: View of a car dashboard partially disassembled during the installation process.
Connection Diagram:
- Connect the Original Car Power.
- Connect the Navigation Video Cable.
- Connect the plug of the Original Car Power Cable.
- Connect the Original Car Video Cable.
- Connect the WiFi Antenna.
- Connect the USB port.
- Connect the Aftermarket CAM power supply (blue line).
- Connect the Reversing Detection Line (brown wire).
- Connect the Aftermarket Front Camera Port.
- Connect the Aftermarket Rear Camera Port.
Note: For detailed visual guidance, please refer to any installation videos provided by the seller on the product page.
5. Operating Instructions
5.1 Switching to CarPlay/Android Auto System
The device supports touch screen operation. To switch to the CarPlay/Android Auto system, press the