Retekess T130

Contents

Retekess T130 Tour Guide System User Manual

Model: T130 Transmitter & T131 Receiver

1. Introduction

The Retekess T130 Tour Guide System is a wireless audio interpretation device designed for various group communication needs, such as factory tours, church services, and guided tours. It features PLL noise reduction, one-to-many communication, and a compact, portable design for ease of use.

Retekess T130 Tour Guide System components including transmitters, receivers, and a charging hub.
The Retekess T130 system, highlighting key features like PLL Noise Reduction and 99 channels.
Product overview video demonstrating the T130 Transmitter and T131 Receiver, their ports, and basic operation.

2. Setup

2.1 On-off Operation

Transmitter: T130

  • Turn on: Keep pressing the "M" button for 2 seconds.
  • Turn off: Keep pressing the "M" button for 2 seconds.

Receiver: T131

  • Turn on: Keep pressing the "II" button for 2 seconds.
  • Turn off: Keep pressing the "II" button for 2 seconds.

2.2 ID Setting

ID setting is crucial to avoid interference when multiple groups use devices in the same location or when adding new receivers to an existing group. The ID of the transmitter and all receivers in a group must be identical.

There are two methods for ID setting:

  1. Transmitter ID Setting:
    Turn off the transmitter. Insert the microphone. Keep pressing the "" button (right hand) and then press the "M" button (left hand) for 2 seconds to turn on. Release the right-hand button when the ID number starts changing. You are now in ID setting mode. Use the "" or "" buttons to change the ID number, then press "M" to confirm. The transmitter will now enter wireless transmitting status (ID number flickering, antenna and power status icons displayed).
  2. Receiver ID Setting:
    Turn off the receiver. Insert the earphone. Keep pressing the "" button (left hand) and then press the "II" button (right hand) for 2 seconds to turn on. Release the left-hand button when the ID number shows "00". The receiver is now in wireless ID receiving mode, and its ID will automatically match the transmitter's ID. (Ensure the transmitter is in wireless transmitting status).

After setting the IDs for all devices in the group, turn them all off. When turned on again, they will operate correctly.

2.2.2 Manual ID Setting (For a few receivers)

Receiver Manual ID Setting:
Turn off the receiver. Keep pressing the "" button (right hand) and press the "II" button (left hand) for 2 seconds to turn on. Release the right-hand button when the ID number starts changing. You are now in manual ID setting mode. Use the "" or "" buttons to change the ID number, then press "II" to confirm. Turn off the receiver; the manual ID setting process is complete.

Diagram showing easy two-step pairing process for the T130 transmitter and multiple T131 receivers.
Easy Pairing: Features a simple two-step pairing process for effortless user setup.

3. Operating Instructions

3.1 Volume Adjustment (Receiver: T131)

When the display shows the searching icon "Q", volume cannot be adjusted. Once the receiver receives the transmitting signal, the display will show the signal icon "Tull". You can then use the "" or "" buttons to adjust the volume. There are 10 volume levels (0-9).

Image showing a hand adjusting the volume on a Retekess T131 receiver.
Volume Adjustable: Listeners can freely adjust the volume while listening.

3.2 AUX Input (Transmitter: T130)

The T130 transmitter supports using an AUX cable to connect with external media devices such as cell phones, laptops, computers, or tablets for audio input.

Diagram showing the AUX input on the T130 transmitter and its connectivity to various devices like computers, laptops, cell phones, and tablets.
AUX Input: Supports connecting the transmitter with external media devices.

3.3 One-to-Many Calls

One T130 transmitter can be used with any number of T131 receivers, providing reliable audio for large groups.

Diagram illustrating one-to-many communication, where a single T130 transmitter broadcasts to multiple T131 receivers.
One-to-many Calls: One transmitter can be used with any number of receivers.

3.4 Headphone Jack

The T131 receiver is equipped with a standard 3.5mm headphone jack, allowing users to connect their own headphones.

Close-up image of the 3.5mm headphone jack on the T131 receiver, showing a headphone plug inserted.
3.5 mm Headphone Jack: You can use your own headphones with a 3.5mm jack.

4. Maintenance

4.1 Charging

The T130 Transmitter and T131 Receiver are equipped with built-in rechargeable lithium batteries. They are charged via a DC 5V 1A Mini USB jack.

Image showing the T130 transmitter being charged via its DC5V Mini USB port.
Rechargeable Battery: The T130 transmitter charging via DC5V Mini USB.
Close-up of the DC5V charging port on the T130 Transmitter.
T130 Transmitter DC5V charging port.
Close-up of the Mini-USB charging jack and earphone jack on the T131 Receiver.
T131 Receiver Mini-USB charging jack and earphone jack.

4.2 Battery Care

If the transmitters and receivers are not used for a long time, charge them once every 3 months to protect the batteries from damage.

5. Troubleshooting & Safety Information

5.1 General Warnings

WARNING!

  • Do not use charger outdoors or in moist environments; use only in dry locations/conditions.
  • Do not disassemble the charger, as this may result in electrical shock or fire.
  • Do not operate the charger if it has been broken or damaged.
  • Do not place a portable radio in the area over an airbag or in the airbag deployment area. The radio may be propelled with great force and cause serious injury to occupants of the vehicle when the airbag inflates.
  • Turn off your radio when in potentially hazardous environments: Near electrical blasting caps, in a blasting area, in explosive atmospheres (inflammable gas, dust particles, metallic powders, grain powders, etc.).
  • Turn off your radio while taking on fuel or while parked at gasoline service stations.

5.2 Electromagnetic Interference and Compatibility

  • Turn off your radio in any facility where posted notices instruct you to do so, such as hospitals or health care facilities (Pacemakers, Hearing Aids and Other Medical Devices) that may be sensitive to external RF energy.
  • Turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions.

5.3 Antenna Safety

WARNING!

  • Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with the skin when the radio is in use, a minor burn can result.

5.4 Battery Safety

  • When conductive material such as jewelry, keys, or chains touch exposed terminals of the batteries, it may complete an electrical circuit (short circuit the battery) and become hot, causing bodily injury such as burns. Exercise care in handling any battery, particularly when placing it inside a pocket, purse, or other container with metal objects.

5.5 Long Transmission

  • When the transceiver is used for long transmissions, the radiator and chassis will become hot.

5.6 Avoiding Choking Hazard

Small Parts. Not for children under 3 years.

5.7 FCC & CE Compliance

This device complies with Part 15 of the FCC Rules and is in compliance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. For full text of the EU declaration of conformity, refer to www.tivdio.com.

Your Retekess radio is designed and tested to comply with national and international standards for human exposure to radio frequency electromagnetic energy.

6. Specifications

Retekess T130 Tour Guide System Specifications
FeatureT130 TransmitterT131 ReceiverTT002 Charge BaseTT001 Charge Case
Frequency Range195-230MHz195-230MHzN/AN/A
ChannelsUp to 99Up to 99N/AN/A
Frequency Response50Hz-18000Hz50Hz-18000HzN/AN/A
Frequency Stability±0.005%N/AN/AN/A
Modulation Deviation±75KHzN/AN/AN/A
Power SupplyBuilt-in 900mAh lithium batteryBuilt-in 600mAh lithium batteryN/AN/A
Working HoursAbout 12 hoursAbout 18 hoursN/AN/A
Charge MethodDC 5V 1A Mini USB jackDC 5V 1A Mini USB jackAdapter input: AC 100-240V 50/60Hz, USB output: DC 5V, 7AAdapter input: AC110-220V, 50/60Hz, USB output: DC 5V, 7A
Transmission DistanceAbout 60m (196ft)N/AN/AN/A
Dimensions99 x 56 x 14mm / 3.9 x 2.2 x 0.5 in72 x 42 x 12mm / 2.8 x 1.6 x 0.5 in190 x 95 x 50mm / 7.4 x 3.7 x 2 in500 x 265 x 140mm / 19.7 x 10.4 x 5.5 in
Weight58g / 0.13lb45g / 0.1lb430g / 0.95lb3200g / 7lbs
Charge CapacityN/AN/AN/AUp to 2 Transmitters + 30 Receivers
Diagram showing battery capacities and working hours for T130 Transmitter (900mAh, 12H) and T131 Receiver (600mAh, 18H).
Battery Life: T130 Transmitter offers 12 hours, T131 Receiver offers 18 hours of continuous working.
Image showing the compact dimensions of the T131 Receiver (72x42x12mm) and T130 Transmitter (99x56x14mm), and how they can be carried in pockets, clipped, or on lanyards.
Compact and Portable Design: Ultra-lightweight and easy to carry.
Image illustrating the 50m working distance of the T130 transmitter, showing a guide and a tourist within range.
Working Distance: Transmitter has a communication range of 50 meters/196 feet.

7. Package Contents

7.1 T130 Transmitter Package Includes:

  • T130 Transmitter
  • Lavalier microphone
  • Charging cable
  • Lanyard
Image of the T130 Transmitter with an attached lavalier microphone.
T130 Transmitter with lavalier microphone.
Close-up of a lavalier microphone clipped to a white shirt.
Lavalier microphone for the T130 Transmitter.
Image of the T130 Transmitter with a blue lanyard.
T130 Transmitter with lanyard.

7.2 T131 Receiver Package Includes:

  • T131 Receiver
  • D-type earphone
  • Charging cable
  • Lanyard
Image of the T131 Receiver with an attached D-type earphone.
T131 Receiver with D-type earphone.
Close-up of a D-type earphone worn by a person.
D-type earphone for the T131 Receiver.
Image of the T131 Receiver with a blue lanyard.
T131 Receiver with lanyard.

7.3 Optional Charging Accessories:

  • TT002 Charge Base: A multi-port USB charging base.
  • TT001 Charge Case: A portable charging case for multiple devices.
Image of the TT002 Charge Base with multiple USB ports.
TT002 Charge Base.
Image of the TT002 Charge Base with an optional power cord (US/EU/AU/UK).
TT002 Charge Base with optional power plug.
Image showing the dimensions of the TT002 Charge Base: 7.4 inches long, 3.7 inches wide, 2 inches high.
Dimensions of the TT002 Charge Base.
Image of the TT001 Charge Case interior, showing slots for multiple devices and a power cable.
TT001 Charge Case interior.
Image of the TT001 Charge Case exterior, a silver briefcase-style case with a handle.
TT001 Charge Case exterior.
Close-up of the power input and on/off switch on the back of the TT001 Charge Case.
TT001 Charge Case power input and switch.
Close-up of the latches and handle on the TT001 Charge Case.
TT001 Charge Case latches and handle.

8. User Tips

  • Translation Functionality: The T130 system does not have an automatic translation function. It only transmits the guide's voice in real-time. If translation is required, it must be performed by a human interpreter, whose voice is then transmitted through the system to the listeners.
  • Portability: Both the transmitter and receiver are lightweight and compact, making them easy to carry in pockets, clip to clothing, or wear on lanyards for all-day comfort during tours and visits.
  • Versatile Applications: The system is suitable for a wide range of uses, including factory tours, church services, and general tour guiding.
Image showing a guide speaking into a T130 transmitter and multiple tourists listening with T131 receivers, indicating 99 channels available.
99 Channels: You can set up 99 groups in the same area.
Image depicting various applications for the T130/T131 system, including factory tours, church services, and outdoor tour guiding.
Multiple Applications: Ideal for factory tours, church, and tour guiding.

9. Warranty & Support

Retekess has been a trusted brand since 2008, serving over 100,000 business teams across 112 countries. For repairs and service, please contact Retekess customer support.

EU Importer:
Name: Germany Retevis Technology GmbH
Address: Uetzenacker 29, 38176 Wendeburg

Retekess brand logo and text 'Trusted Since 2008. 16+ years serving 100,000+ business teams across 112 countries with efficient communication solutions.'
Retekess: Trusted since 2008.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.