1. Product Overview
This Real Carbon Fiber Shark Fin Antenna Cover is designed to enhance the aesthetic appeal of your vehicle while providing a protective layer over the existing shark fin antenna. Made from genuine carbon fiber, it offers a sleek, sporty look.

Figure 1: Various styles of Carbon Fiber Shark Fin Antenna Covers.
2. Setup and Installation
Installation of the carbon fiber antenna cover is a straightforward process that does not require the removal of your original car parts.
Installation Steps:
- Prepare the Surface: Ensure the surface of your existing shark fin antenna is clean, dry, and free from dust, wax, or grease. Use an automotive-grade cleaner if necessary.
- Test Fit: Before removing the adhesive backing, carefully place the carbon fiber cover over your original antenna to ensure proper alignment and fit.
- Apply the Cover: Peel off the protective film from the adhesive backing on the underside of the carbon fiber cover.
- Position and Press: Carefully align the cover over your original antenna and firmly press it down across the entire surface to ensure strong adhesion. Apply pressure for at least 30 seconds, paying attention to the edges.

Figure 2: Visual comparison of the antenna before and after cover installation.

Figure 3: Installed carbon fiber antenna cover.
3. Operating Instructions
This product is a decorative and protective cover for your vehicle's existing shark fin antenna. It does not alter the functionality of the antenna itself. Once installed, no further operation is required.
4. Maintenance
To maintain the appearance and integrity of your carbon fiber antenna cover, follow these guidelines:
- Cleaning: Clean the cover with mild automotive soap and water using a soft microfiber cloth. Avoid abrasive cleaners, harsh chemicals, or stiff brushes, as these can scratch or damage the carbon fiber finish.
- Protection: For added protection and shine, you may apply a UV-protective wax or sealant designed for automotive finishes.
- Adhesion Check: Periodically check the edges of the cover to ensure the adhesive remains secure.

Figure 4: Detail of the carbon fiber weave.
5. Troubleshooting
- Cover Not Adhering Properly:
- Ensure the surface was thoroughly cleaned and dry before application.
- Apply firm, even pressure across the entire cover during installation.
- If issues persist, consider using an automotive adhesive promoter (not included) on the antenna surface before applying the cover.
- Fitment Issues:
- Verify that the product is compatible with your specific vehicle model and year. While designed for a range of models, slight variations can occur.
- Damage to Cover:
- Inspect for cracks or chips. If the cover is significantly damaged, replacement may be necessary.
6. Specifications
| Feature | Detail |
|---|---|
| Material | Real Carbon Fibre |
| Item Type | Chromium Styling / Car Decoration |
| External Testing Certification | ISO9001 |
| Model Year Compatibility | 2006-2024 |
| Compatible Car Models | BMW 3, 4, 5, 7 Series, i3, M3, M5, X1; MINI R55, R56; BMW E60, E61, E90, E92, F10, F11, F18, F01, F02 |
| Package Length | 20 cm |
| Package Width | 20 cm |
| Package Height | 3 cm |
| Package Weight | 0.4 kg |
7. User Tips
- For the best and most durable adhesion, ensure the surface of your original antenna is meticulously cleaned and completely dry before applying the carbon fiber cover. Any residue can compromise the adhesive bond.
- After installation, avoid washing your car for at least 24-48 hours to allow the adhesive to fully cure and bond effectively.
8. Warranty and Support
For specific warranty information, please refer to the terms provided by your retailer or contact the seller directly at the point of purchase. Additional product guides and documents, including a user manual in PDF format, may be available from the seller. You can typically find this document at this link.