1. Product Information
This manual provides instructions for the AUTOXBERT Engine Oil Filler Cap, designed to seal the vehicle's fuel tank, prevent fuel leakage, and keep foreign matter from entering. It is suitable for most passenger vehicles with standard threaded fuel tank necks.
Product Specifications
| Feature | Detail |
|---|---|
| Product Name | Engine Oil Filler Cap |
| Model Number | 06B103485C |
| Brand Name | AUTOXBERT |
| Material | Plastic (PA66-GF30) |
| Color | Black |
| Special Features | Protector |
| Item Weight | 0.045kg |
| Item Height | 1.6 inch (4 cm) |
| Item Width | 3.9 inch (10 cm) |
| Item Length | 5.1 inch (13 cm) |
| Origin | Mainland China |
For a detailed diagram of the oil filler cap, refer to the image below:

2. Safety & Warnings
Important Safety Information
Read all instructions before use. Inspect the product before each use; do not use if damaged, cracked, or with loose sealing gaskets.
General Warnings
- Only operate the fuel tank cap when the vehicle engine is completely off and the vehicle is in a well-ventilated area.
- Keep away from open flames, sparks, and high-temperature sources to avoid fire and explosion risks.
- Do not over-tighten or use tools to twist the fuel tank cap, which may cause damage to the cap and the fuel tank thread.
- Keep the fuel tank cap clean; prevent dust, sand, and other foreign objects from entering the fuel tank when opening the cap.
3. Setup and Installation
Tools & Materials Needed
- New universal fuel tank cap (ensure the thread size and sealing type match your vehicle).
- Clean soft cloth (to wipe the fuel tank neck and the cap's sealing surface).
Installation Steps
Before starting, ensure the vehicle is parked on a flat and stable surface, the engine is off, the parking brake is engaged, and the engine and fuel system have cooled down completely (at least 5 minutes). Ensure no open flames, smoking, or electrical sparks are within 5 meters of the vehicle. Avoid touching the fuel tank neck or cap with oily or greasy hands.
- Step 1: Open the Original Fuel Tank Cap
Locate the fuel tank cap cover on the vehicle body (usually on the left/right rear side), and open the cover by pressing or pulling the switch (refer to the vehicle owner's manual for the switch position). Grasp the original fuel tank cap, rotate it counterclockwise to loosen it (usually 1-2 rotations), and then lift the cap off the fuel tank neck. Wipe the fuel tank neck's sealing surface and the surrounding area with a clean soft cloth to remove dust, fuel stains, and other debris.
Figure 2: Typical installation location of the oil filler cap in an engine bay. - Step 2: Inspect the New Fuel Tank Cap
Check the new fuel tank cap's sealing gasket: ensure it is intact, non-deformed, and firmly attached to the cap; replace the gasket if it is damaged or missing. Inspect the cap's thread: make sure there is no deformation, rust, or damage that may affect the sealing effect.
Figure 3: Exploded diagram showing the oil filler cap (highlighted) and surrounding engine components. - Step 3: Install the New Fuel Tank Cap
Align the new fuel tank cap with the fuel tank neck's thread, hold the cap steadily, and rotate it clockwise to tighten it. Tighten until you hear a clicking sound (the built-in anti-over-tightening mechanism triggers), which indicates the cap is securely sealed and properly installed; do not continue to rotate after the click. Close the vehicle's fuel tank cap cover and press it until it snaps into place to ensure it is fully closed.
4. Operating and Verification
Testing & Verification
After installation, check the fuel tank cap cover to confirm it is tightly closed and no looseness. Start the vehicle and run it for a short time (2-3 minutes), then turn off the engine and check the fuel tank neck area for fuel leakage; if leakage is found, immediately turn off the engine and recheck the cap installation or replace the cap. Check the vehicle's fuel warning light (if equipped): ensure it is off and no abnormal fuel pressure alarm occurs.
5. Maintenance
Maintenance Tips
- Clean regularly: Wipe the fuel tank cap's surface, thread, and sealing gasket with a dry soft cloth every month to remove dust and fuel residue; do not use corrosive cleaning agents.
- Inspect the sealing gasket: Check the gasket for hardening, cracking, deformation, or aging every 3 months; replace the gasket or the entire cap if the gasket is damaged to maintain the sealing effect.
- Avoid impact: Do not hit or drop the fuel tank cap to prevent deformation of the cap body and damage to the internal mechanism.
- Storage: If the cap is not in use for a long time, store it in a dry, cool, and dust-free place, and keep the sealing gasket away from oil and chemical substances.
- Replace periodically: Replace the fuel tank cap every 1-2 years (or sooner if damage, deformation, or poor sealing is found).
6. Troubleshooting Common Issues
| Issue | Solution |
|---|---|
| Cap cannot be tightened or loosened smoothly | Check if the thread of the cap or fuel tank neck is deformed/rusted; clean the thread with a dry cloth and apply a small amount of anti-rust lubricant (for metal threads only). Do not use excessive force to avoid thread damage. |
| Fuel leakage at the fuel tank neck | Recheck the cap installation to ensure it is tightened to the clicking position; inspect the sealing gasket for damage, deformation or misalignment, replace the gasket if necessary. |
| Abnormal fuel pressure alarm on the vehicle | Check if the cap is fully sealed; verify the cap's pressure relief valve (built-in) is not blocked (do not disassemble the valve by yourself). If the alarm persists, replace the fuel tank cap and consult a professional mechanic. |
| Cap falls off easily | Confirm the anti-over-tightening mechanism is not damaged; check if the cap matches the vehicle's fuel tank thread specification, replace with a suitable cap if needed. |
Note: Always refer to your vehicle's owner's manual for model-specific fuel tank cap operation and maintenance guidance. If you are unsure about any step or encounter unresolvable issues, consult a professional vehicle mechanic or the product after-sales service.
7. User Tips
- Users have reported that this cap fits perfectly on models like the Caddy 4, offering a comfortable and natural grip compared to original caps.
8. Support and Additional Resources
For further assistance or if you encounter issues not covered in this manual, please consult a professional vehicle mechanic or contact the product's after-sales service.
An official user manual in PDF format is available for download: View User Manual (PDF).