1. Safety Notes
- Install this unit in a well-ventilated, cool, dry, clean place, away from direct sunlight, heat sources, vibration, dust, moisture, or cold.
- Use the voltage specified on this unit only. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, or personal injury. The manufacturer will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified.
- Do not attempt to modify or fix this unit by yourself. Contact a salesperson or customer service when any service is needed. The cabinet should never be opened for any reason.
- When not planning to use this unit for long periods of time (e.g., when going on vacation), disconnect the power cable from the AC wall outlet.
Important note: The product specifications and information mentioned in this manual are for reference only. The content of this manual is subject to change without notice.
2. Product Overview and Features
The SMSL SU-X is a high-performance MQA Full Decoder designed to deliver exceptional audio quality. It incorporates advanced technologies and high-quality components to provide a stable, reliable, and low-noise audio experience.
Key Features:
- Supports MQA decoding and MQA-CD.
- Equipped with the brand-new third-generation XMOS XU-316, supporting PCM up to 32bit/768kHz and DSD up to DSD512.
- Features dual latest flagship ESS ES9039MSPRO DAC chips with built-in MQA hardware decoding.
- Eight-channel parallel circuit design for ultra-low distortion (as low as 0.00005% / -126dB).
- Utilizes 21 high-end dual op-amps and numerous HiFi components.
- Adopts 2nd PLL to eliminate SPDIF transmission JITTER.
- Brand-new self-developed CK-03 clock processing circuit to greatly reduce clock jitter.
- Supports DOP independent display, clearly showing the current decoding format.
- USB, optical, coaxial, AES, and I2S inputs support DSD; coaxial, optical, and AES also support DOP64.
- Tempered glass fully fitted color IPS display screen.
- Built-in low noise power supply processing for improved power efficiency and lower power consumption.
- Qualcomm's high-end Bluetooth chip supports LDAC (24bit/96kHz), APTX/HD, SBC, and AAC.
- High-quality all-aluminum shell and gold-plated input/output terminals.
- Japan Audio Association (JAS) Hi-Res certification.
- Equipped with a full-function remote control.
3. Component Identification
Familiarize yourself with the various components and connectors of your SU-X unit.
- Knob: Volume +/-, menu switching, function selection.
- Remote window: Infrared receiver for remote control.
- Standby LED: Indicates standby status.
- Display: Color IPS screen for information and settings.
- XLR Output: Balanced audio output.
- AC IN: Power input (100V-240V).
- USB-B Input: USB Type-B audio input.
- USB-C Input: USB Type-C audio input.
- Optical Input: Optical (SPDIF) audio input.
- Coaxial Input: Coaxial audio input.
- I2S Input: I2S (HDMI) audio input.
- Bluetooth antenna: For wireless Bluetooth connection.
- AES/EBU Input: AES/EBU digital audio input.
- RCA Output: Unbalanced audio output.
4. Remote Control Usage
The SU-X comes with a full-function remote control (RC-8C) for convenient operation.
Button Functions:
- Power ON/OFF: Turns the unit on or off.
- Up / Down / Left / Right: Navigation buttons for menu selection.
- MENU/OK: Enters menu, confirms selection.
- Input select: Cycles through input sources.
- Mute: Mutes/unmutes audio output.
- FN (Define in the menu): Function button, configurable in the menu.
- Volume + / -: Adjusts output volume.
Note: This remote controller uses 2 x R03/AAA batteries.
- If the remote control is ineffective when close to the machine, replace the batteries.
- If the remote control will not be used for a long time, remove the batteries.
- Dispose of used batteries in accordance with local regulations.
5. Initial Setup and Connections
Power Connection:
- Ensure the SU-X is placed on a stable, level surface.
- Connect the provided power cable to the AC IN port (6) on the rear panel of the SU-X.
- Plug the other end of the power cable into a suitable AC power outlet.
Audio Input Connections:
Connect your audio source devices to the appropriate input ports on the SU-X:
- USB-B (7) / USB-C (8): For connecting to a computer (Windows 7/8/8.1/10/11 may require drivers; Mac OSX10.6 or later, Linux are driverless).
- Optical (9): For connecting digital audio sources via optical cable.
- Coaxial (10): For connecting digital audio sources via coaxial cable.
- AES/EBU (13): For connecting professional digital audio sources.
- I2S (11): For connecting I2S compatible sources (HDMI connector).
- Bluetooth (12): For wireless connection to Bluetooth-enabled devices.
Audio Output Connections:
Connect the SU-X to your amplifier or active speakers:
- XLR Output (5): For balanced audio connection to an amplifier with XLR inputs.
- RCA Output (14): For unbalanced audio connection to an amplifier with RCA inputs.
6. Operating Instructions
Basic Operation (Knob):
- Knob: Rotate to adjust volume or navigate menu options.
- Short press knob: Enters menu, confirms selection.
- Long press knob: Exits menu, switches the unit on/off.
Bluetooth Operation:
- Connection:
- Switch the input source on the SU-X to Bluetooth.
- Turn on Bluetooth on your phone/device and search for "SMSL SU-X".
- Click "Pair Connection" after finding it. The connection is successful when your phone shows "Connected".
- Re-connection:
- If the Bluetooth connection is lost (e.g., moving out of range and returning), some phones may not automatically reconnect.
- In such cases, a short press of the Bluetooth button on the remote control can re-establish the connection.
- Clear pairing:
- Press and hold the Bluetooth Control button on the remote control.
- After clearing, if your phone cannot find "SMSL SU-X", you may need to delete the "SMSL SU-X" device from your phone's saved Bluetooth devices and then search again.
MQA Playback:
The SU-X supports MQA decoding via USB, optical fiber, and coaxial inputs.
- MQA playback does not require special playback software (e.g., foobar2000, Audirvanaplus only needs to support ASIO or WASAPI audio output).
- When playing MQA audio, it is recommended to adjust the computer's volume to maximum for optimal audio output.
- When playing an MQA file, the sampling rate of the original master recording will be displayed on the SU-X screen.
For more information on MQA, visit https://www.mqa.co.uk/how-it-works.
Notes on playing MQA-CD:
- Ensure that the CD being played is a genuine MQA-CD.
- Verify that the optical or coaxial signal output of the CD player is an unprocessed source code.
7. Settings and Configuration
The SU-X offers various settings to customize your listening experience. Access these settings via the menu using the knob or remote control.
Inputs and Outputs:
The SU-X supports the following input and output types:
| Category | Type |
|---|---|
| Inputs | USB Type-B, USB Type-C, Bluetooth, Optical, Coaxial, AES/EBU, I2S (HDMI) |
| Outputs | All Line Out, Balanced (XLR), Unbalanced (RCA) |
PCM Filter Settings:
The SU-X provides 8 different PCM filter modes:
- F-1 FILTER OFF (NOS)
- F-2 MINIMUM PHASE
- F-3 APODIZING (Notch, fast roll-off, linear phase filter)
- F-4 LINEAR FAST (Fast roll-off, linear phase filter)
- F-5 LINEAR SLOW (Slow roll-off, linear phase filter)
- F-6 MINIMUM FAST (Fast roll-off, minimum phase filter)
- F-7 MINIMUM SLOW (Slow roll-off, minimum phase filter)
- F-8 LOW DISPERSION (Low dispersion delay)
DSD Filter Settings:
The SU-X offers several DSD cutoff frequency options:
- 47kHz CUT-OFF
- 50kHz CUT-OFF
- 60kHz CUT-OFF
- 70kHz CUT-OFF
PRE MODE (Preamplifier Mode):
This setting controls the volume adjustment function for the output interfaces:
- VARIABLE: The output volume is controlled by the unit's volume knob/remote.
- FIXED: The output volume is fixed, bypassing the unit's volume control.
SOUND COLOR (Tone Menu):
The SU-X has 9 sound color settings, processed by the DAC's DSP:
- Rich1, Rich2, Rich3 (Harmonic rich)
- Tube1, Tube2, Tube3 (Tube-like sound)
- Crystal1, Crystal2, Crystal3 (High clarity)
These settings create different sound effects without changing the frequency response curve. Setting to "Standard" bypasses this function.
FN KEY FOR (FN Button Function):
The FN button on the remote can be configured:
- OUTPUTS: Switches between output types.
- BLUETOOTH: Switches to Bluetooth input.
DPLL (Digital Phase-Locked Loop) Settings:
This is a special function of ESS series products, adjusting the internal DPLL bandwidth to balance anti-clock jitter and input tolerance. There are 15 settings, with 5 as default. A larger number increases jitter adaptation, a smaller number improves clock jitter performance.
- When the input signal's clock stability is good, reduce this value for better clock performance.
- When the input signal's clock stability is poor, increasing this value can prevent sound interruptions, especially when using a TV as a signal source.
I2S MODE:
This option is used to match different I2S interface standards. Please check the interface definition of your signal source before use.
- NORMAL: Standard PS AUDIO format.
- REVERSED: Inverted DATA and LRCLK.
DIMMER (Auto Screen Off):
Sets the time (5-60 seconds) after which the screen automatically turns off. The screen will re-light up if you operate the remote control or the knob. This reduces light pollution and improves the listening environment.
BRIGHTNESS (Display Brightness):
Adjusts the display brightness from 1% to 99%.
RESET (System Reset):
- During Bluetooth input, long press the middle button of the knob to reset only the Bluetooth pairing status.
- During other inputs, long press the middle button of the knob to clear all settings, including Bluetooth.
8. Technical Specifications
| Parameter | Value |
|---|---|
| Input | USB / Optical / Coaxial / Bluetooth / I2S / AES |
| Output | RCA / XLR |
| Line output amplitude (XLR) | 5.2Vrms |
| Line output amplitude (RCA) | 2.5Vrms |
| THD+N (UN-WTD) | 0.00005% (-126dB) |
| Dynamic range (XLR) | 135dB |
| Dynamic range (RCA) | 128dB |
| SNR (XLR) | 135dB |
| SNR (RCA) | 128dB |
| USB transmission | USB 2.0 Asynchronization |
| USB compatibility | Windows 7/8/8.1/10 (Needs Driver), Mac OSX10.6 or Later, Linux (Driverless) |
| MQA decoder | USB / Optical / Coaxial / AES |
| MQA-CD decoder | Optical / Coaxial / AES |
| PCM Sampling rate & Bit Width | 44.1 ~ 768kHz (32bit) |
| DSD Sampling rate & Bit Width | 2.8224 ~ 22.5792MHz (1bit) |
| Optical / Coaxial Sampling rate & Bit Width | 44.1 ~ 192kHz (24bit) |
| DoP | DoP256 (USB), DoP64 (Optical / Coaxial / AES) |
| Bluetooth (LDAC) | 24bit/96kHz (990kbps/660kbps/330kbps) |
| Bluetooth (aptX-HD) | 24bit/48 kHz_576kbps |
| Bluetooth (aptX) | 16bit/44.1 kHz_352kbps |
| Bluetooth (SBC) | 16bit/44.1 kHz_328kbps |
| Bluetooth (AAC) | 16bit/44.1 kHz_320kbps |
| Power Consumption | <20W |
| Standby power | <0.5W |
| Size (WxHxD) | 250x51x217mm |
| Weight | 2.7kg / 5.95lbs |
SMSL reserves the right to make improvements which may result in specification or feature changes without notice.
9. Troubleshooting
If you encounter issues with your SU-X, please refer to the following common troubleshooting steps:
- No Power: Ensure the power cable is securely connected to both the unit and the wall outlet. Check if the power outlet is functional.
- No Sound:
- Verify that the correct input source is selected on the SU-X.
- Check all audio cable connections (USB, Optical, Coaxial, XLR, RCA) between the source, SU-X, and amplifier/speakers.
- Ensure the volume on the SU-X and your amplifier/speakers is not muted or set too low.
- If using USB, ensure the correct drivers are installed on your computer (if applicable for Windows).
- Bluetooth Connection Issues:
- Ensure Bluetooth is enabled on your source device and the SU-X is in Bluetooth input mode.
- Try clearing the pairing history on both the SU-X (long press Bluetooth button on remote) and your source device.
- Move your source device closer to the SU-X to rule out range issues.
- Sound Interruptions (especially with TV source): Adjust the DPLL setting to a higher value in the menu to improve tolerance for unstable clock signals.
- Remote Control Not Working: Replace the batteries in the remote control (2 x AAA). Ensure there are no obstructions between the remote and the SU-X's IR receiver.
10. User Tips
No specific user tips were available from the provided data. However, general advice for DAC users includes:
- Experiment with different PCM filter settings to find the sound profile that best suits your preferences and audio content.
- For critical listening, consider using wired connections (USB, Optical, Coaxial) over Bluetooth for potentially higher fidelity.
- Ensure your audio source provides a clean digital signal for optimal performance from the SU-X.
11. Warranty Information
Term of Service:
Foshan Shuangmusanlin Technology Co., Ltd (S.M.S.L) promises to offer good-quality products. If the product is found to be faulty within 7 days of purchase under normal use, customers may choose to return, replace, or repair it (returns/replacements are only possible if the product does not affect secondary sales). Free repair is provided for one year under normal use.
The purchase date is determined by the date on the invoice or receipt provided by the seller. For online purchases, a screenshot of the transaction can serve as proof.
Warranty Void Conditions:
The warranty will be void if the unit is damaged due to inappropriate usage, including but not limited to:
- All damages caused by inappropriate use, including operating in a non-normal working environment or not following instructions.
- Dismantling, refitting, or repairing by the user without authorization.
- Damage caused by using non-designated or non-accredited fittings.
- Inability to provide credible proof of purchase.
- The product not belonging to S.M.S.L.
12. Support and Contact
For any service needs, technical support, or warranty claims, please contact your S.M.S.L Audio reseller or customer service. Do not attempt to open or repair the unit yourself.
A user manual in PDF format is available for download: View User Manual (PDF)