Introduction
Thank you for choosing the IRALAN LED Ceiling Fan with Invisible Blades. This modern ceiling fan is designed to provide both efficient air circulation and adjustable lighting, featuring a silent motor and convenient remote control operation. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
Safety Warnings
Important: Failure to follow these safety instructions may result in fire, electric shock, or personal injury.
- The input wattage for this fan should be 110V/60Hz. Ensure your electrical supply matches these requirements.
- Electrical installation must be performed by a qualified licensed electrician.
- To reduce the risk of electric shock, ensure electricity is turned off at the main circuit breaker before assembling, disassembling, or performing any maintenance.
- When assembling, the wire order must be: Ground wire, hot (supply) wire, neutral wire. When disassembling, the wire order should be: Neutral wire, hot (supply) wire, ground wire.
- Make sure all assembled screws are tight during assembly.
- To reduce the risk of injury, do not touch the fan blades when the fan is operating.
- Non-professional operation is strictly prohibited.
Tools Required for Installation
- Electrical Tape
- 14mm Wrench
- Slotted Screwdriver
- Phillips Screwdriver
- Herringbone Ladder (Step Ladder)
- Tape Pliers
Components List
Before beginning installation, verify that all components are present:
- Canopy
- Downrod
- Connector
- Mounting Bracket
- Fan Body
- Light Kit
- Light Glass
- Screw Pack (containing various screws and R-clips)
Product dimensions and specifications are detailed in the image above.
Installation Steps (Setup)
Refer to the official user manual PDF for detailed diagrams and visual aids: User Manual (PDF)
1. Mounting Bracket Installation
The method depends on your ceiling type:
- For Concrete Ceiling: Drill two holes with an 8mm diameter to an appropriate depth. Insert two expansion screws into the holes. Fix the hanger bracket into the expansion screws using wood screws and tighten it with the nuts of the expansion screws. (Refer to Fig. 2 in the PDF manual).
- For Wood Ceiling: Fix the mounting bracket to the wood ceiling (minimum thickness of 7cm) using four wood screws. (Refer to Fig. 3 in the PDF manual).
2. Light Kit Installation
- Loosen four screws from the bottom of the fan body. Remove one screw and set it aside for later use.
- Attach the light kit to the fan body by rotating it until it seats into the three loosened screws.
- Tighten the three screws, then screw in the previously removed screw and tighten it securely. (Refer to Fig. 4 & 5 in the PDF manual).
3. Hanger System Installation
- Remove the pin from the downrod by detaching the R-clip.
- Thread the lead wire through the downrod, canopy, and connector.
- Seat the downrod into the fan body and rotate it until the holes on the downrod align with the holes on the fan body.
- Insert the pin through the aligned holes and secure it with the R-clip on the other side. (Refer to Fig. 6 in the PDF manual).
- Place the downrod with the hanger ball into the mounting bracket.
- Rotate the motor assembly until the "Check Tab" on the mounting bracket drops into the "Registration Slot" on the hanging ball and seats firmly. (Refer to Fig. 7 & 8 in the PDF manual).
4. Canopy Installation
- Raise the canopy towards the ceiling to cover the mounting bracket.
- Ensure the canopy seats into the two screws on the bracket.
- Rotate the canopy to ensure the screw heads are at the narrow end of the keyholes.
- Tighten the screws to secure the canopy. (Refer to Fig. 9 in the PDF manual).
5. Attaching the Light Glass
- Align the key slot on the light glass with the key slot on the fan body.
- Rotate the glass clockwise slightly until it is firmly secured. (Refer to Fig. 10 & 11 in the PDF manual).
Operating Instructions
The IRALAN LED Ceiling Fan is controlled via the included remote control.
Remote control for fan and light functions.
Fan Functions:
- Power On/Off: Use the dedicated fan power button on the remote.
- Wind Speeds: Select from 3 available wind speeds: Soft wind, Natural wind, and Strong wind.
- Timer Function: Set the fan to automatically turn off after 1 hour, 2 hours, 4 hours, or 6 hours using the timer buttons on the remote.
Quiet motor operation and fan speed/timer settings.
Light Functions:
- Power On/Off: Use the dedicated light power button on the remote.
- Color Temperature Adjustment: The light offers three adjustable color temperatures: Warm Light (3000K - Relax), Natural Light (4000K - Daily), and White Light (6500K - Focus). Cycle through these options using the remote.
- Brightness Adjustment: The light brightness is adjustable from 10% to 100%. Use the dimmer buttons on the remote to set your desired brightness level.
Adjustable light color temperature and brightness levels.
Maintenance
- Cleaning: Periodically clean the fan and light fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
- Check Connections: Annually check all screws and electrical connections to ensure they remain tight and secure.
- Blade Care: The invisible blades are designed to retract. Avoid obstructing their movement.
Troubleshooting
Fan Will Not Start
- Check all wire connections to the fan to ensure they are correct and secure.
- Verify that the input wattage is correct (110V/60Hz) and that power is supplied to the fan.
Fan Sounds Noisy
- Ensure all assembled screws are tight, especially those on the mounting bracket and fan body.
- Make sure wire nut connections are not rubbing against each other or the interior wall of the switch housing.
Fan Wobbles
The fan is balanced before shipping, but long-distance transportation may affect its balance. If you notice a wobble after final assembly, perform a balance adjustment:
- Take out the balance kit (magnet pieces) from the package.
- Stick two magnet pieces on any one place marked on the fan (refer to Fig. 13 in the PDF manual for guidance on placement).
- Turn on the fan and check if the wobble problem is still noticeable. Repeat this process, moving the magnet pieces, until the wobble disappears.
- Once the optimal position is found, take out a balance kit (adhesive weight) and stick it on the identified spot instead of the magnet pieces. (Refer to Fig. 14 in the PDF manual).
Specifications
| Feature | Specification |
|---|---|
| Brand Name | IRALAN |
| Model Number | BY-601-500-1 |
| Item Type | Ceiling Fans |
| Power | 72W |
| Lumen | 4800LM |
| Application Area | 10-25 M² |
| Sizes Available | 36 inch (96cm), 42 inch (110cm), 48 inch (118cm) |
| Voltage | 90-265V |
| Light Source | Integrated LED bulbs |
| Number of Lights | 1 pcs |
| Control Method | REMOTE CONTROL |
| Fan Speeds | 6 Speeds (Soft, Natural, Strong) |
| Light Color Temperature | Adjustable (3000K, 4000K, 6500K) |
| Brightness | Adjustable (10%-100%) |
| Timer Function | 1h, 2h, 4h, 6h |
| Motor Type | Pure Copper Silent Motor (<35db) |
| Features | Invisible fan blades |
| Body Material | ABS, IRON |
| Style | Modern Style |
| Weight | Approx. 7 kg |
| Power Source | AC |
| Certification | CCC, CE |
| Origin | Mainland China |
User Tips
- For optimal quiet operation during sleep, consider using the lowest fan speed setting.
- If you experience any unusual noise, double-check all mounting screws and wire connections for tightness.
Warranty and Support
This IRALAN LED Ceiling Fan comes with a 1-year warranty from the date of purchase.
For any questions, technical assistance, or warranty claims, please contact your distributor or the sales team using the contact information provided at the point of purchase or in the official user manual PDF: User Manual (PDF).
Important Notice
Non-professional operation is strictly prohibited. Always ensure that installation and any electrical work are carried out by qualified personnel.