1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Tuya Smart WiFi SOS Emergency Call Button. This multifunctional pager is designed to provide quick emergency alerts, making it ideal for elderly patients or anyone needing immediate assistance. Please read this manual thoroughly before using the product to ensure proper function and safety.
2. Product Overview
2.1. Receiver Components
- Alarm indicator lamp: Shows device status. Red light indicates power, green light flashing indicates distribution network mode.
- Built-in speaker: For audible alarms.
- USB DC 5V power port: For continuous power supply.
- External siren interface: For connecting an optional external siren.
- Hanging board buckle: For wall mounting.
- Power switch: To turn the device on/off.
2.2. SOS Button Components
- Button: Press to trigger an emergency call.
- Indicator light: Shows button status.
- CR2032 Battery: Power source for the button.
- Lanyard: For wearing the button around the neck.
3. Setup
3.1. Power On
Ensure the Receiver is plugged into a USB power cable. The LED lights on the Receiver will illuminate, indicating it is powered on.
3.2. Pairing the SOS Button with the Receiver
The SOS Button is typically pre-paired with the Receiver from the factory. If pairing is needed, follow these steps:
- Initiate Pairing on Receiver: Short press the key on the back of the Receiver. The Receiver will emit a "beep" sound for 15 seconds, indicating it's in pairing mode.
- Pair SOS Button: While the Receiver is beeping, short press the SOS Button. The Receiver will stop beeping upon successful pairing.
WARNING: The SOS Button must be used within 70m (230ft) range of the Receiver for proper function. Do not take it outside this range.
3.3. Connecting to the Mobile APP (Tuya Smart or Smart Life)
To utilize smart features and receive remote notifications, connect the Receiver to the mobile app.
3.3.1. Download the APP
Scan one of the QR codes below or search for "Tuya Smart" or "Smart Life" in your application market to download the app.
3.3.2. Notes on Network Connection
- The Receiver supports Wi-Fi: IEEE 802.11 b/g/n 2.4G. Ensure your router is set to 2.4GHz.
- The distance between the Receiver and your WiFi router needs to be less than 20m (66ft) for optimal connection.
- If the Receiver is too far from the router, it will not be able to connect to the smartphone.
3.3.3. Connect the Receiver to the APP
- Ensure your phone is connected to WiFi and Bluetooth is turned on.
- Long press the key on the back of the Receiver for 6 seconds to enter distribution network mode (green light flashes continuously).
- Open the Tuya Smart/Smart Life APP and click "Add Device".
- The app should automatically discover the device. Click "Add".
- Confirm your WiFi network name and enter the password, then click "Next".
- Wait for a successful connection. Once connected, click "Done".
3.3.4. Connect the SOS Button to the APP
- On the Receiver's page in the APP, click "Accessories" at the bottom.
- Click "+" in the upper right corner to add a new accessory.
- After the Receiver beeps, short press the SOS Button.
- Wait for a successful connection, then click "Confirm".
Note: If the SOS Button does not work after pairing, delete it from the APP's accessories list and re-add it following the steps above.
3.4. Installation
3.4.1. Receiver Installation
The Receiver can be placed in two ways:
- On a table: Simply place the Receiver on a flat surface.
- Wall mounting:
- Mark the wall with two mounting hole locations. Drill two holes and insert wall plugs.
- Use a Phillips screwdriver to twist two screws into the holes in a clockwise direction, leaving a small gap for mounting.
- Turn the Receiver to align with the hanging plate buckle and secure it to the screws.
WARNING: The Receiver must be connected to USB power at all times to function.
3.4.2. SOS Button Installation
The SOS Button offers flexible placement options:
- Stick to the wall: Use double-sided tape to stick the SOS Button to a wall, such as in a bathroom or kitchen, for easy access.
- Wearable: Use the provided lanyard to hang the SOS Button around the neck, allowing for portability and immediate access in an emergency.
4. Operation
4.1. Testing the Pairing
To ensure the SOS Button and Receiver are correctly paired:
- Press the SOS Button.
- The Receiver should alarm for 30 seconds, and the SOS indicator light should flash continuously.
- You can remove the alarm in the APP.
4.2. APP Operations
4.2.1. Setting APP Notifications
To ensure you receive emergency alerts:
- In the APP, go to "Me" and click the settings icon (gear) in the upper right corner.
- Select "APP Notification".
- Turn on "Allow Notifications", "Sounds", and "Badges". Choose your preferred alert methods.
WARNING: If your phone is in Silent mode, it will not ring when the SOS button is pressed. Ensure your phone is set to Ring mode to receive alerts.
4.2.2. Removing an Alarm
When an alarm is triggered, you can remove it via the app:
- On the Receiver's page in the APP, click "Alarm silence" or "Alarm remove".
4.2.3. Multiple People Sharing
You can share device control and notifications with other users:
- On the Receiver's page in the APP, click the edit icon (pencil) in the upper right corner.
- Select "Share Device".
- Click "Add Sharing" and choose how to share (e.g., with an account, or via messages).
4.2.4. Setting Alarm Ringtone
- On the Receiver's page in the APP, click "Accessories".
- Select the Receiver (e.g., "RControl1").
- Click "device ring" and choose your preferred ringtone.
- Click "Confirm" and then "Save".
4.2.5. Setting Alarm Time
- On the Receiver's page in the APP, click "Setting".
- Click "Alarm time" and choose the desired duration.
- Click "Confirm".
4.2.6. Setting Alarm Volume
- On the Receiver's page in the APP, click "Setting".
- Click "Alarm volume" and choose your preferred level (Low, Middle, High, Mute).
- Click "Confirm".
4.2.7. Setting Brightness
- On the Receiver's page in the APP, click "Setting".
- Click "Alarm light" to toggle the brightness setting.
4.2.8. Deleting SOS Button from APP
- On the Receiver's page in the APP, click "Accessories".
- Slide the SOS Button entry to the left and click "Delete".
- Click "Confirm" to remove.
4.2.9. Clearing All Accessories
- On the Receiver's page in the APP, click "Setting".
- Click "Factory reset".
- Click "Confirm". This will remove all paired accessories.
4.2.10. Unbinding Mobile APP
- On the Receiver's page in the APP, click the edit icon (pencil) in the upper right corner.
- Scroll down and click "Remove Device".
- Click "Confirm" to unbind the device from your account.
5. Maintenance
5.1. Battery Replacement (SOS Button)
The SOS Button uses a CR2032 3V battery. Replace it when the indicator light no longer illuminates or the button fails to respond.
- Open the cover of the SOS Button.
- Remove the old CR2032 battery using a small tool.
- Replace with a new CR2032 battery, ensuring correct polarity (positive side up).
- Put the cover back on.
WARNING: When replacing the battery of the SOS Button, use only a CR2032 battery and ensure correct polarity.
5.2. Cleaning
Wipe the devices with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
6. Troubleshooting (Q&A)
Q: Does the Receiver need to be plugged into a USB power cable all the time?
A: Yes, the Receiver requires continuous USB power to function.
Q: What if the SOS Button cannot make the Receiver alarm?
A: Check the following:
- Ensure the SOS Button has been successfully paired with the Receiver.
- Verify the SOS Button is powered (press it to see if its light illuminates).
- Make sure the SOS Button is within 70m (230ft) range of the Receiver.
Q: What if the Receiver cannot connect to the smartphone?
A: Check the following:
- Ensure both the smartphone and Receiver are on the same WiFi Network.
- The Receiver needs to be within 20m (66ft) of the WiFi router for a stable connection.
Q: Can I take the SOS Button outside?
A: No, the SOS Button needs to be within 70m (230ft) range of the Receiver, and the Receiver needs to be within 20m (66ft) range of the WiFi router. Taking the SOS Button outside this range will prevent it from functioning correctly.
7. Specifications
| Feature | Specification |
|---|---|
| Operating voltage | 5V |
| Static current | ≥60mA |
| Alarm current | ≤200mA |
| Wireless frequency | 433.92MHz |
| Wi-Fi standard | IEEE 802.11 b/g/n 2.4G |
| Working temperature | -10°C ~ 50°C |
| SOS Button Battery | CR2032 3V |
| SOS Button Operating Time | Up to 6 months |
| SOS Button Dimensions | 50mm x 50mm x 16mm (1.968in x 1.968in x 0.629in) |
8. User Tips
- For reliable alerts, always ensure your smartphone is not in silent mode when the SOS button is in use.
- Place the Receiver centrally within your home, ideally within 20 meters (66 feet) of your WiFi router, to maintain a strong connection.
- Keep the SOS Button within 70 meters (230 feet) of the Receiver to ensure emergency signals are transmitted successfully.
- Consider mounting the SOS button in high-risk areas like bathrooms or kitchens, or wear it with the lanyard for constant access.
9. Safety Warnings and Support
Please read all warnings before using the product. Refer to the operation instruction for complete details.
- WARNING: The SOS Button must be used within 70m (230ft) range of the Receiver. Taking it outside this range may cause failure to alarm.
- WARNING: The Receiver must be placed within 20m (66ft) of the WiFi router for proper APP connection. The closer the better.
- WARNING: The Receiver must be connected to USB power at all times to function.
- WARNING: If your phone is in Silent mode, it will not ring when the SOS Button is pressed. Ensure your phone is set to Ring mode to receive alerts.
- WARNING: When replacing the battery of the SOS Button, use only a CR2032 battery and ensure correct polarity.
- WARNING: To comply with RF exposure guidelines, install and operate the device with a minimum distance of 20cm between the radiator and your body.
For further assistance or detailed information, please refer to the full user manual PDF available at User manual (PDF).