City Train Railway Accessories City Train Railway Accessories

Contents

MOC Creative Expert City Train Railway Accessories Building Blocks Instruction Manual

Compatible with Lego®

Introduction

This manual provides detailed instructions for assembling your MOC Creative Expert City Train Railway Accessories building blocks. These sets are designed to enhance your model railway layouts with realistic traffic lights, railings, and railway crossings. The blocks are fully compatible with standard Lego® building systems.

For a comprehensive digital guide, please refer to the official PDF manual: View User Manual (PDF)

Overview of various MOC City Train Railway Accessories sets including traffic lights, railings, and crossings.
Figure 1: Overview of various MOC City Train Railway Accessories sets.

Safety Warnings

  • Choking Hazard: Small parts. Not for children under 3 years.
  • Recommended Age: 14+ years.
  • General Warning: Do not eat, keep away from fire.
  • California Proposition 65 Warning: This product contains Acrylonitrile, 1,3-Butadiene, and Styrene, chemicals known to the State of California to cause female reproductive toxicity, developmental toxicity, cancer, and male reproductive toxicity. For more information, go to www.P65Warnings.ca.gov.

Setup and Assembly

Your building block set comes unassembled. Assembly instructions are typically provided via a QR code on the packaging, which links to a digital PDF manual. Ensure all parts are present before beginning assembly.

QR code on a plastic bag containing building blocks, indicating where to scan for assembly instructions.
Figure 2: Example of QR code for assembly instructions found on packaging.

Parts List

Refer to the following diagrams for a complete list of components included in your railway crossing set. Please note that specific parts may vary slightly depending on the exact accessory model purchased.

Bagged building blocks for assembly.
Figure 3: Bagged components.
Building blocks and instructions in a box.
Figure 4: Components and instructions in a box.

Railway Crossing Parts

Detailed diagram of various building block pieces for the railway crossing, including track segments, plates, and specialized elements, with quantities and part numbers.
Figure 5: Detailed parts list for the railway crossing (Example: Blue Style).
Dimensions of a signal post: 13cm height, 3.2cm base.
Figure 6: Dimensions of a signal post.

Assembly Steps for Railway Crossing with Barriers

Follow these steps to assemble your railway crossing with barriers. The images below illustrate the process:

  1. Step 1: Base Track Assembly
    Begin by assembling the main track section. Attach 8x flat plates and 2x track segments to the base plate. (Refer to image for visual guidance).

    Assembly step 1: Attaching 8x flat plates and 2x track segments to the base plate.
    Figure 7: Assembly Step 1.
  2. Step 2: Add Road Plates
    Place 4x road plates onto the track section, covering the studs as shown. (Refer to image for visual guidance).

    Assembly step 2: Placing 4x road plates onto the track section.
    Figure 8: Assembly Step 2.
  3. Step 3: Install White and Grey Tiles
    Attach 2x white tiles and 6x grey tiles to the edges of the road plates. (Refer to image for visual guidance).

    Assembly step 3: Attaching 2x white tiles and 6x grey tiles to the edges of the road plates.
    Figure 9: Assembly Step 3.
  4. Step 4: Add Grey Slopes
    Place 16x grey slope pieces along the outer edges of the crossing. (Refer to image for visual guidance).

    Assembly step 4: Placing 16x grey slope pieces along the outer edges of the crossing.
    Figure 10: Assembly Step 4.
  5. Step 5: Center Road Plates
    Add 8x flat plates and 2x smaller plates to the center section of the crossing. (Refer to image for visual guidance).

    Assembly step 5: Adding 8x flat plates and 2x smaller plates to the center section of the crossing.
    Figure 11: Assembly Step 5.
  6. Step 6: Add Curved Tiles
    Place 4x curved tiles on each side of the central road section. (Refer to image for visual guidance).

    Assembly step 6: Placing 4x curved tiles on each side of the central road section.
    Figure 12: Assembly Step 6.
  7. Step 7: Assemble Barrier Base (Side 1)
    Construct the base for the first barrier using 1x small green plate, 1x green brick, 1x green plate, 1x green brick, 1x black brick, and 1x black slope. (Refer to image for visual guidance).

    Assembly step 7: Constructing the base for the first barrier.
    Figure 13: Assembly Step 7.
  8. Step 8: Attach Barrier Hinge (Side 1)
    Attach the hinge mechanism for the barrier using 1x red round plate, 1x black round plate, and 1x black hinge piece. (Refer to image for visual guidance).

    Assembly step 8: Attaching the hinge mechanism for the first barrier.
    Figure 14: Assembly Step 8.
  9. Step 9: Complete Barrier Arm (Side 1)
    Assemble the barrier arm using 6x grey connectors, 1x black connector, 3x red striped cylinders, 3x white striped cylinders, and 1x black end piece. Attach it to the hinge. (Refer to image for visual guidance).

    Assembly step 9: Assembling and attaching the first barrier arm.
    Figure 15: Assembly Step 9.
  10. Step 10: Assemble Barrier Base (Side 2)
    Repeat Step 7 for the second barrier base. (Refer to image for visual guidance).

    Assembly step 10: Constructing the base for the second barrier.
    Figure 16: Assembly Step 10.
  11. Step 11: Attach Barrier Hinge (Side 2)
    Repeat Step 8 for the second barrier hinge. (Refer to image for visual guidance).

    Assembly step 11: Attaching the hinge mechanism for the second barrier.
    Figure 17: Assembly Step 11.
  12. Step 12: Complete Barrier Arm (Side 2)
    Repeat Step 9 for the second barrier arm. (Refer to image for visual guidance).

    Assembly step 12: Assembling and attaching the second barrier arm.
    Figure 18: Assembly Step 12.

Completed Assembly Examples

Assembled overhead signal structure with red circle highlighting the lights.
Figure 19: Assembled overhead signal structure.
Assembled overhead signal structure.
Figure 20: Another view of the assembled overhead signal structure.
Assembled railway crossing with barriers in an open position.
Figure 21: Assembled railway crossing with barriers (open).
Assembled railway crossing with barriers in a closed position.
Figure 22: Assembled railway crossing with barriers (closed).
Assembled railway bridge or overpass structure.
Figure 23: Assembled railway bridge.
Assembled signal post with yellow and black stripes and red/green lights.
Figure 24: Assembled signal post.

Operating Instructions

These building block accessories are designed for manual interaction within your model railway setup.

  • Railway Crossings: The barrier arms can be manually raised and lowered to simulate traffic flow and train passage.
  • Traffic Lights/Signals: These are static models and do not light up or change automatically. They serve as decorative and realistic elements for your railway scene.
  • Compatibility: All components are designed to seamlessly integrate with existing Lego® train tracks and building systems.

Care and Maintenance

  • Cleaning: To clean the blocks, gently wipe them with a damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the plastic.
  • Storage: Store the assembled models or loose blocks in a cool, dry place away from direct sunlight to prevent discoloration and warping. Keep them in a container to prevent loss of small parts.
  • Handling: Handle assembled models with care, especially fragile sections like barrier arms or signal posts, to prevent accidental disassembly.

Troubleshooting

  • Missing Parts: If you find any parts missing upon opening the package, please contact the seller with your order details. Double-check all packaging materials before discarding.
  • Fragile Build: Some users have noted that certain assemblies, particularly barrier mechanisms, can be fragile. If you experience this, consider reinforcing critical connection points with additional compatible building blocks if available.
  • Barriers Not Staying Horizontal: If the barrier arms do not remain in the desired horizontal (open) or vertical (closed) position, the hinge mechanism might be loose or require slight adjustment. Reinforcement may be necessary.
  • Difficulty with Instructions: If the digital instructions are unclear, try zooming in on the PDF or viewing it on a larger screen for better detail.

Specifications

FeatureDetail
MaterialABS Plastic
Block TypeSmall building block (Compatible with Lego®)
Recommended Age14+ years
Is ElectricNo Battery (Non-electric)
OriginMainland China
Package Dimensions (L x W x H)24 cm x 19 cm x 3 cm
Package Weight0.135 kg
Signal Post Dimensions (H x Base)13 cm x 3.2 cm

User Tips

  • Accessing Instructions: The assembly manual is typically provided as a PDF accessible by scanning a QR code on the product packaging. Ensure you have a QR code scanner app on your smartphone or tablet.
  • Reinforce Fragile Builds: If you find certain parts of the assembly, such as the barrier arms, to be a bit fragile or prone to drifting, consider using extra compatible building blocks to reinforce the connections for added stability.
  • Compatibility Check: These blocks are designed to fit perfectly with original Lego® rails and other building systems, allowing for seamless integration into your existing layouts.
  • Review PDF Clarity: If the digital instructions appear small or difficult to read, try viewing the PDF on a larger screen (like a computer monitor) and utilize the zoom function for better clarity.
  • Enjoy the Build: Many users have found the assembly process enjoyable and the final product a great addition to their train sets.

Warranty and Support

For any issues regarding missing parts, product defects, or assembly difficulties not covered in this manual, please contact the seller directly through your purchase platform. Provide your order number and a clear description of the problem for efficient assistance.

The manufacturer does not offer a specific warranty beyond standard consumer rights. Please retain your proof of purchase for any claims.

© 2024 MOC Creative Expert. All rights reserved. Lego® is a trademark of the Lego Group, which does not sponsor, authorize or endorse this product.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.