1. Introduction
Thank you for purchasing the Tuya Human Presence Sensor. This device utilizes millimeter-wave radar technology to detect human presence, including subtle movements like breathing, and features a built-in luminance sensor for enhanced smart home automation. Please read this manual carefully before use to ensure correct operation and to avoid damage to the equipment. The information and images provided are for reference only; please refer to the actual product for details.
Important Notes:
- The WiFi version requires a 2.4GHz WiFi network. Ensure your router is configured correctly.
- The Zigbee version requires a Tuya Zigbee Hub or Tuya Multimode Gateway. It does not support third-party gateways or Zigbee2Mqtt.
- A 5V/1A power adapter is required but not included. An old phone charger can be used.
- The sensor is designed for indoor use only.
- Avoid installing on metal surfaces, or directly facing air conditioning units, fans, or curtains, as these can interfere with radar signals.
2. Product Overview
The Tuya Human Presence Sensor is a compact device designed for advanced human presence detection. It integrates millimeter-wave radar for precise motion and static presence sensing, along with a luminance sensor to measure ambient light.
Figure 2.1: Product features including mmWave Radar, Light Intensity, Human Motion, and Human Static Sensing.
The sensor actively detects subtle movements such as chest micro-movements caused by human respiration, providing more accurate presence detection compared to traditional PIR sensors. This allows for intelligent linkages, such as automatic lighting control, preventing lights from turning off when a person is still present.
Figure 2.2: Comparison of Millimeter Wave Radar (Human Presence Sensor) vs. Infrared (PIR) Sensor capabilities.
The built-in illumination sensor has a recognition range of 0-3000 Lux, allowing for smart automation based on ambient light conditions.
Figure 2.3: Built-in Illumination Sensor with 0-3000 Lux range.
The device has a 90° detection angle and a 6-meter detection range, enabling real-time monitoring day and night.
Figure 2.4: Detection Angle and Range.
3. Package Contents
- Host machine (Sensor) x1
- USB cable (Micro USB, 200cm length) x1
- User Manual x1
Figure 3.1: Micro USB Power Interface.
4. Specifications
Figure 4.1: Product Parameters for WiFi and Zigbee Versions.
| Parameter | WiFi Version | Zigbee Version |
|---|---|---|
| Network Requirement | WiFi 2.4GHz | Tuya Zigbee Hub or Tuya Multi-mode Gateway |
| Max Detection Distance | 6 m | 6 m |
| Detection Angle | 90° (Conical shape) | 90° (Conical shape) |
| Power Supply | 5V/1A | 5V/1A |
| Power Supply Cable Length | 2 m | 2 m |
| Operating Voltage | DC 5V/1A | |
| Operating Temperature | -10°C ~ 55°C | |
| Operating Humidity | 0% ~ 95%RH | |
| Product Size | 49 x 49 x 10.5mm | |
| Radar Frequency | 5.8G/24G | |
| Illuminance Value | 0 - 3000 Lux | |
| Stationary Detection Range | 0 - 6 m | |
| Moving Detection Range | 0 - 6 m | |
5. Setup
5.1. Download the App
To use the sensor, you need to download the "Smart Life" app on your smartphone. Search for "Smart Life" in the App Store (iOS) or Android App Store (Android) and install it.
If you are using the Zigbee version, ensure you have a Tuya Zigbee gateway. If this is your first time using a gateway, refer to its detailed user manual for setup.
5.2. Binding the Device
- Plug the USB power cable into the device's Micro USB port and connect it to a 5V/1A power adapter (not included).
- Ensure the LED indicator on the device is flashing. If it's not flashing, press and hold the reset button until the LED light flashes.
- For WiFi Version:
- Turn on Bluetooth on your mobile phone.
- Open the Smart Life APP, log in, and tap the "+" icon in the upper right corner of the home page.
- Select "Add device". The app will guide you through the pairing process.
- For Zigbee Version:
- Ensure you have a Tuya Zigbee gateway set up.
- Open the Smart Life APP, log in, and tap the "+" icon in the upper right corner of the home page.
- Select "Zigbee gateway" and then follow the app's instructions to add the device.
- When the APP finds the device, tap the device icon and follow the in-app instructions to complete the pairing process.
5.3. Installation Method
The sensor can be installed using either ceiling mounting or side wall mounting. The detection area is a conical airspace with a 6-meter sensing distance and a 90-degree angle.
Figure 5.1: Ceiling and Side Installation Methods.
- Ceiling Installation: Mount the sensor on the ceiling. The radar module will detect downwards and outwards.
- Side Wall Installation: Mount the sensor on a side wall. This method can help reduce false detections from small animal movements.
Special Note on Installation:
- Do not expose the radar sensor to interfering devices such as other wireless routers.
- Ensure the sensor is at least 1 meter away from your router to prevent interference and false alarms.
- After installation, it is crucial to test and adjust the parameters in the APP according to the specific environment to achieve optimal performance.
6. Operating the Sensor
6.1. APP Interface Overview
The Smart Life app provides a comprehensive interface to monitor and control your Human Presence Sensor. You can view human status, historical records, and configure intelligent linkages.
Figure 6.1: Smart Life App Page Show.
6.2. APP Adjustable Parameters
The app allows you to fine-tune various parameters to optimize the sensor's performance for your specific environment. Parameters can be adjusted for motion detection distance, motion sensitivity, micro-motion detection sensitivity, and micro-motion detection distance.
Figure 6.2: APP Parameter Adjustment Interface.
The LED indicator provides status feedback:
- Fast flashing or slow flashing: Device is in pairing status.
- Always on: Pairing is successful and the network is connected.
- Off: Network is disconnected.
The device collects light values every 2 seconds. When the light value changes, the data is uploaded automatically.
The sensor supports uploading presence status (present, absent) and human body action status (moving, slightly moving). You can configure intelligent linkages based on these statuses.
If you need to maintain a 'presence' state for a period after a person leaves, you can set the "Presence keep time" in the APP (0 to 180 seconds).
6.3. Intelligent Linkage Examples
The sensor can be integrated into various smart home scenarios to enhance convenience and security.
Figure 6.3: Static Human Body Recognition and Intelligent Linkage Scenarios.
- Smart Bathroom: When entering the bathroom, the light automatically turns on and stays on while you are present.
- Smart Living Room: Background music starts when you enter and stops when you leave.
- Home Security: When leaving home, if no one is detected, all lights turn off, and security cameras activate after 5 minutes.
Figure 6.4: Preventing Thieves - Alarm Activation.
7. Maintenance
The Tuya Human Presence Sensor requires minimal maintenance. Keep the device clean and free from dust. Do not use harsh chemicals or abrasive cleaners. Ensure the power supply is stable and within the specified voltage range (5V/1A).
8. Troubleshooting
8.1. Configuration Failure (WiFi Version)
- Power and Indicator: Check if the sensor is powered on and its indicator light is in fast flashing mode.
- WiFi Network: Ensure your mobile device is connected to a 2.4GHz WiFi network.
- Bluetooth Permissions: Grant Smart Life app Bluetooth permission and ensure your phone's Bluetooth is turned on. If your phone uses low-power Bluetooth in GPS, ensure location services are also enabled.
- Network Connectivity: Verify your router is working correctly and you have a stable internet connection.
- WiFi Password: Double-check that the WiFi password entered in the app is correct.
- Router Restrictions: Confirm your WiFi router does not have access restrictions like MAC address whitelisting.
- SSID Conflict: If your 2.4GHz and 5GHz WiFi networks share the same SSID, try changing the SSID of the 2.4GHz network and connect your smartphone to it.
- AP Mode: If configuration still fails, turn off your phone's Bluetooth, long-press the sensor's Reset Button for 5 seconds to switch its indicator light to slow flashing mode, then try adding it using AP mode in the app.
8.2. False Alarms or Inaccurate Detection
If the device experiences false detections or fails to detect presence accurately, you can adjust the radar parameters in the APP:
- Start by adjusting the parameters under "Motion Detection Settings". Test the changes.
- If issues persist, then adjust the parameters under "Micro motion detection settings".
- If the device detects "no human presence" when a person is still present (e.g., sitting 1.5m away without moving arms), try turning down the upper and lower distance limits for micro motion sensitivity and micro motion detection. This may require multiple tests and patient adjustment.
- If the device detects human presence but fails to report "non-human presence" after a person leaves, adjust the "Presence keep time" setting in the APP.
8.3. Compatibility with Smart Speakers
The sensor does not currently support third-party smart speakers like Amazon Alexa, Google Home, or Yandex Alice due to the complexity of its configuration parameters.
9. User Tips
- Fine-tuning is Key: While default settings work for many, be prepared to fine-tune the motion and micro-motion sensitivity and distance settings in the app for optimal performance in your specific room layout and usage patterns. This is especially important for detecting static presence (e.g., when reading or sleeping).
- Optimal Placement: Experiment with both ceiling and side wall installation to find the best coverage and minimize false triggers. Remember to keep it at least 1 meter away from your WiFi router.
- Power Supply: Any qualified 5V/1A power adapter will work. Consider repurposing an old phone charger for convenience.
- Multi-User Access: Share control of the sensor with family members by using the app's sharing function or by creating a virtual home.
10. Frequently Asked Questions (FAQ)
- Q: What kind of device is it and what benefits can I gain from using it?
- A: This sensor detects object movement and accurately determines human presence, even micro-movements like breathing. It's a superior alternative to traditional PIR sensors, which are prone to false alarms and environmental interference. It provides accurate judgment of human existence, including small pets.
- Q: Is it made by Tuya?
- A: No, but we are partners with Tuya. We developed and manufactured it under authorization, and Tuya provides the app and cloud services.
- Q: What are the necessary conditions for using it?
- A: You need a smartphone to install the app, and a 2.4GHz WiFi network with the router constantly online.
- Q: How do I know my WiFi router has a frequency of 2.4GHz?
- A: Most routers support 2.4GHz, and this information is usually on the router's nameplate. If 2.4GHz is off by default, refer to your router's manual to enable it.
- Q: Can I control it through 2G, 3G, 4G, 5G mobile networks?
- A: Yes. As long as your mobile phone can access the internet, the Smart Life app can control the sensor. However, the sensor itself requires a constant WiFi connection.
- Q: Is it using ESP series chips?
- A: No, we no longer manufacture products with built-in ESP series chips.
- Q: How long is the power supply cable?
- A: The included USB cable is 200cm long. Currently, it's USB to Micro USB, but future versions may use USB to Type-C without prior notice.
11. Warranty and Support
For detailed warranty information and technical support, please refer to the official product page or contact the seller directly. Keep your purchase receipt for any warranty claims.
A PDF user manual is available for download from the seller's product page for additional details and diagrams.