1. Introduction
The XTOOL D5S is an essential diagnostic tool designed to address common automotive issues across engine, transmission, ABS, EPB, and SRS systems. This advanced device efficiently identifies and clears fault codes, accesses data stream information, reads freeze frame data, and retrieves ECU information.
The D5S features an upgraded dual-core 1.2GHz Processor, 128MB RAM, and 32GB ROM, all operating on a user-friendly Linux system. It is complemented by a robust 3150mAh 3.6V battery for extended use.
It includes 16 special functions, all with lifetime free updates, such as Oil Light Reset, EPB, SAS, DPF, BMS Reset, Throttle, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Matching, Suspension, Window Initialization, Headlight, EGR Relearn, Control Unit Reset, and Gearbox Matching. Additionally, the D5S allows users to view up to four data streams simultaneously in a single interface.
Product Overview Video
Video: XTOOL D5S Four-Main System Diagnostic Tool - Cost-Effective, Portable and Powerful.
2. Safety Information
For your safety, the safety of others, and to prevent damage to devices and vehicles, it is crucial to read and understand all safety instructions presented in this manual before operating or coming into contact with the device.
General Safety Instructions:
- Read and Understand: Ensure that all operators and individuals in the vicinity of the device have read and understood the safety instructions.
- Proper Use: Only use the device as described in this manual. Always adhere to the safety messages and test procedures provided by the vehicle or equipment manufacturer.
- Knowledge and Skill: The automotive technician must be knowledgeable about the system being tested. Familiarize yourself with proper service methods and test procedures.
- Acceptable Testing Practices: Perform tests in a manner that ensures your safety, the safety of others, and prevents damage to the device and the vehicle.
Specific Responsibilities:
- Refer to Manufacturer Guidelines: Always consult and follow the safety messages and applicable test procedures from the vehicle or equipment manufacturer before using the device.
- Use Appropriate Tools and Techniques: Due to the variety of test applications and product variations, it's important to use the correct tools and techniques for each specific task.
- Anticipate Safety Requirements: While this manual provides comprehensive guidance, it cannot cover every potential situation. Technicians must be prepared to handle unforeseen circumstances safely.
Safety Messages
Safety messages are included to prevent both personal injury and damage to equipment. Each safety message begins with a signal word that indicates the level of hazard involved.
⚠ Danger
This signal word indicates "an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders."
⚠ Warning
This signal word "indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders."
Important Safety Instructions:
- Ventilation: When the engine is running, ensure the service area is well ventilated or connect a building exhaust removal system to the engine exhaust. Engines emit carbon monoxide, a colorless and poisonous gas that can impair reaction times and lead to serious injury or even death.
- Safe Environment: Always perform automotive testing in a safe environment.
- Eye Protection: Wear safety eye protection that meets ANSI standards.
- Avoid Hazards: Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
- Transmission and Brakes: Put the transmission in PARK (for automatic) or NEUTRAL (for manual) and ensure the parking brake is engaged.
- Wheel Blocks: Place blocks in front of the drive wheels and never leave the vehicle unattended while testing.
- Ignition System Caution: Be extra cautious around the ignition coil, distributor cap, ignition wires, and spark plugs, as these components generate hazardous voltages when the engine is running.
- Fire Extinguisher: Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
- Test Equipment Connections: Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
- Clean Equipment: Keep the test equipment dry, clean, and free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.
- No Driving While Testing: Do not drive the vehicle and operate the test equipment simultaneously to avoid distractions that may cause an accident.
- Service Manual Reference: Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment.
- Battery Check: Ensure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure to avoid damaging the test equipment or generating false data.
- Avoid Electromagnetic Interference: Do not place the test device on the vehicle's distributor, as strong electromagnetic interference can damage the device.
3. Getting Started
Ensure that the Diagnostic Tool is adequately powered by either checking its battery status or connecting it to an external power supply.
3.1 Turning On/Off or Force Shutdown
- Turning On: Press and hold the power button located on the top right of the device for approximately five seconds. The tool will automatically power on if the internal battery pack has sufficient charge or if it is connected to an AC power supply. If the internal battery pack is completely drained, charge it for more than 6 hours before attempting to turn it on.
- Turning Off: Press and hold the power button for more than three seconds. The tool will then automatically power off. Note: Before turning off, terminate all vehicle communications. Forcing a shutdown during communication could potentially cause issues with the ECM.
- Emergency Shutdown: If the Diagnostic Tool does not respond to navigation or control buttons or operates erratically, press and hold the Power button for at least five seconds. Note: Using emergency shutdown while communicating with the vehicle ECM may cause issues with the ECM on some vehicles.
3.2 Product Activation
- Select Wi-Fi: Select an available Wi-Fi network.
- Register/Log In: For first-time users, the system will prompt you to enter a valid email address and set a login password. Click "Register". If already registered, click "Log In" and enter your credentials.
- Start Using: Click "Start to use" to enter the diagnostic system.
Note: If you are unable to register or see the activation screen, contact support.
3.3 Wi-Fi Connection
The Diagnostic Tool can connect to 2.4 GHz or 5.0 GHz Wi-Fi or a mobile hotspot. Go to More > Settings > Wi-Fi connection, switch on Wi-Fi, select your network, and enter the password.
Note: A Wi-Fi connection is not necessary for diagnostics with most vehicle brands. However, for certain brands (e.g., Peugeot) that require access to an online server for diagnostics, it is essential to connect to Wi-Fi.
4. Device Overview
4.1 Main Ports of The Tablet
Image: XTOOL D5S tablet with labels for ports and buttons.
- 5.45-inch Touch Screen
- Power Button
- VGA 15 PIN-Port
- Type-C Port
- Memory Card Slot (Expandable Up To 128GB)
4.2 Screen Layout & Screen Icons
When you turn on the Diagnostic Tool, the diagnostic screen will appear with various icons for different functions.
Image: Main diagnostic screen showing key function icons.
- Auto Scan: Automatically detects and decodes the VIN, then scans all available vehicle electronic control modules for diagnostics.
- Diagnosis: Accesses the diagnostic menu for vehicle-specific diagnostics, either via Auto VIN or manual input.
- OBD-II: Provides generic OBD-II functions like reading/clearing fault codes and monitoring real-time data.
- Special Functions: Covers commonly performed maintenance services.
- Updates: Allows downloading diagnostic software programs.
- More: Accesses settings, diagnostic reports, language, measurement units, and firmware information.
5. Operation - Diagnosing Vehicles
5.1 Vehicle Connection
The scan tool must be connected to the vehicle's OBD-II port to allow the tablet to establish communication.
- Turn on the tablet.
- Connect the vehicle and tablet using the main test cable. The VGA 15-pin end connects to the device, and the OBDII-16 connector plugs into the vehicle's OBDII port (typically beneath the driver's seat, near the steering wheel). Tighten the nut for a secure connection.
- Turn on the vehicle's ignition switch to start the diagnostic process.
Image: Connection diagram of the XTOOL D5S to a vehicle's OBDII port.
Note: If the OBD port is hard-to-reach, an OBD extension cable may be purchased.
5.2 Identifying a Vehicle
To ensure proper communication and diagnostics, the vehicle must be correctly identified. The process is menu-driven; follow screen prompts to enter information.
- Auto Scan (Auto Identification): Click the "Auto Scan" icon. The tool will automatically scan and decode the vehicle's VIN for identification.
- Manual Input: If auto scan fails, manually input the VIN.
- Manual Selection: If both auto identification and manual VIN input fail, use manual selection. Click "Diagnosis" > Select region > vehicle brand > model year > model name, and other selections as needed. This is the most reliable option.
Note: Auto Identification functionality may not be compatible with all vehicles. If Auto Identification fails, it is advisable to try alternative options.
5.3 OBD-II Functions
The OBD-II function provides access to generic OBD-II data for emissions-related diagnostics.
Image: Screen displaying the 10 full OBD2 functions.
- Read Trouble Codes (Mode $03/07/0A$): Displays current, pending, and permanent emission-related DTCs.
- Clear Trouble Codes (Mode $04$): Erases DTC records, freeze frame data, and other stored information from the ECM. A confirmation screen appears to prevent accidental data loss.
- Live Data (Mode $01$): Views current emission-related data from the ECM. Displays parameters and their values.
- Read Freeze Frame (Mode $02$): Displays a snapshot of critical parameter values at the moment a DTC is set.
- I/M Readiness (Smog Check): Checks the readiness of the monitoring system for emissions compliance.
- O₂S Monitoring Test (Mode $05$): Checks the integrity of oxygen sensors.
- On-Board Monitor Test (Mode $06$): Views results of On-Board Monitor tests for continuously and intermittently monitored systems.
- Component Test (Mode $08$): Enables bidirectional control of the ECM to test components (e.g., EVAP leakage test).
- Read ECU Information (Mode $09$): Displays ECU names, supported protocols, and calibration information.
- Read Vehicle Information: Retrieves vehicle identification details.
Live Data Graphing
The D5S can graphically display up to four different real-time data streams simultaneously on one screen for easy monitoring and analysis.
Image: Four-in-one live data graphing feature.
5.4 Special Functions (16 Hot Maintenance Services)
This section covers various scheduled services and maintenance functions. Follow on-screen instructions to select options, enter values, and perform necessary actions.
Image: Icons for 16 hot maintenance services.
- Oil Reset: Resets the engine oil life system after an oil change.
- EPB (Electronic Parking Brake) Reset: Initializes or resets the EPB system after brake pad replacement or repairs.
- Electronic Steering Adaptation (SAS): Re-adapts or calibrates the electronic power steering system after component replacement or adjustments.
- DPF/GPF After-Treatment (Regen): Performs regeneration operations for Diesel/Gasoline Particulate Filters, including clearing warning lights or initiating regeneration.
- Battery Adaptation (BMS Reset): Reconfigures the battery management system after battery replacement.
- Throttle Adaptation: Recalibrates the throttle control system after replacing the throttle valve or related components.
- Tire Pressure Reset (TPMS Reset): Resets the Tire Pressure Monitoring System after checking or adjusting tire pressure.
- ABS Auto Bleeding: Automatically bleeds the ABS system after repairing or replacing brake system components.
- Injector Coding: Codes or calibrates new injectors after replacement to optimize fuel injection.
- Gearbox Matching: Rematches the ECU and gearbox after replacement or overhaul.
- Suspension System: Adjusts vehicle body height sensors or re-initializes the air suspension system.
- Window Initialization: Re-initializes the window control system after motor replacement or power loss.
- Headlight Adjustment: Recalibrates the angle and range of headlights for adaptive frontlighting systems.
- EGR Learning (Relearn): Performs EGR learning after replacing the EGR valve or cleaning the system.
- Gear Information Learning (CPS Reset): Recalibrates gear ratio and speed signals between engine and gearbox sensors.
- Control Unit Reset: Restores ECU parameters or other related systems to factory default settings.
6. Settings
The "More" menu on the diagnostic screen provides access to various settings for the tablet and diagnostic software.
- Profile: Check your mailbox and change your password. Add workshop information for PDF reports.
- Report: View all historical diagnostic reports.
- Language: Modify the device language. The D5S supports 22 languages including English, Spanish, French, German, Polish, Portuguese, Russian, Danish, Greek, Finnish, Hungarian, Italian, Japanese, Korean, Dutch, Norwegian, Swedish, Thai, Arabic, Turkish, Vietnamese, and Traditional Chinese. English is the default. To change, contact your dealer with your S/N.
- Unit: Set measurement units (Metric, Imperial, US Units).
- Wi-Fi Connection: Manage Wi-Fi networks.
- Display: Adjust screen brightness and sleep time.
- Storage: Check storage space and clear cache.
- Date & Time: Select time zone and format.
- About: View device name, serial number, firmware version, and restore factory settings.
7. Software Updates
Software updates can be performed while connected to a Wi-Fi network or using a mobile phone's hotspot. Using a mobile phone's hotspot is recommended in case of network provider restrictions or when home Wi-Fi is unavailable.
7.1 Updating Software Programs
You have two options for updating:
- Update All Software Programs: Click "Update" at the left of the update menu.
- Update Individual Software Program: Click the download icon at the right side of the corresponding software program. If the update is interrupted, click the icon again to proceed.
7.2 Deleting Software Programs
To free up memory, you can delete rarely used diagnostic software programs. Enter the Diagnostic menu, long-press any diagnostic software package for five seconds. When a blank box appears, check the software package(s) you want to delete and click "Delete".
8. Maintenance
8.1 Print the Report
To view and print vehicle diagnostic reports:
- Send Diagnostic Report to Your Email: Go to More > Diagnostic Report > Choose the report > Share by email > Input your email address.
- Receive and Save: Receive Diagnostic Reports by Email and save them on your phone or iPad.
- Print: Connect your phone or iPad to a printer and print the Diagnostic Report.
Note: For the safety of the device's firmware, avoid connecting it directly to the printer.
8.2 Data Logging
For software-related issues or vehicle communication problems, data logging provides crucial information for technical support. Ensure your Diagnostic Tool remains connected to Wi-Fi for at least 15 minutes and provide the Serial Number (S/N) to technical support for analysis.
9. Troubleshooting (FAQ)
- Q1: I haven't found I/M readiness in the menu.
- A: Click the "OBD-II" icon > Auto Scan/Select OBD-II Protocol > I/M Readiness.
- Q2: Unable to find live sensor data as the generic OBD2 scanner, like short-term/long-term fuel trim.
- A: Click the "OBD-II" icon > Auto Scan/Select OBD-II Protocol > Live Data > LTFT, STFT or similar term.
- Q3: Unable to find the misfire data for my Ford/Dodge/Chrysler/Jeep cars?
- A: OBD-II > Auto Scan or Select OBD-II Protocol for your car > On Board Monitor Test > Select "Misfire Cylinder Data" or similar term.
- Q4: I can not charge the battery now. I plugged in the cord, it's not charging. The battery is almost dead, only about 10% left.
- A: 1. Try to use the original charging cable or OBD test cable to charge the device for more than six hours (preferably with a stable 12V power supply). 2. Hold down the shutdown button for 15 seconds and observe if the device can be turned on normally (do not connect the charging cable). 3. Connect the device to the computer through the USB cable to see if it is recognized. 4. If these methods fail, contact technical support with a video of the charging issue.
- Q5: Can scanner tune up car?
- A: Sorry, D5S Diagnostic Tool does not have the capability to tune up a car.
- Q6: It was frozen until the battery went flat even I tried the reset button and the power button.
- A: Ensure the App is updated to the latest version (More > Setting > About > Version > APP Version). If updated, reset to factory settings. If the issue persists, contact support.
- Q7: I cannot update, I've tried Wi-Fi and cell phone as hotspot, however, keep telling me failure connection.
- A: This could be due to router firewall settings or network provider restrictions. Check if your router firewall can access the server. If the problem persists, contact support.
- Q8: Why should I connect the scanner to internet once a month?
- A: It's a government policy compliant requirement to report IP location to prevent illegal activities. If Wi-Fi connection doesn't resolve the issue, contact support.
- Q9: The auto scan/VIN cannot work on my vehicle.
- A: Auto scan/VIN does not cover all vehicles. Some vehicles don't store VIN in the ECU, or the VIN is not in the database. For some vehicles (e.g., Dodge), it works in "sending command, answering command" mode. Try alternative navigation methods: turn on ignition (engine off for newer, engine on for older vehicles) and try auto scan, manual VIN input, or manual selection (Diagnosis > America/Europe/Asia > Vehicle Selection > Automatic Detection/Manually Selection).
- Q10: My diagnostic tool cannot connect to Wi-Fi.
- A: If it shows "times out", check your router (WPA2, not WPA3) and ensure it doesn't block outgoing network traffic to non-US regions. Switching to a mobile hotspot often resolves registration issues. You can switch back to home Wi-Fi for software downloads after activation. Alternatively, connect via a Wi-Fi extender. If it shows "connect internet to sync your device", correct the time zone in the Android system to match the network time zone.
- Q11: When activating the device, shows error message "registration failure" after entering your email address.
- A: Try a mobile hotspot (recommended) or a different network to activate.
- Q12: Received a used device with a lock screen password, unable to open the device.
- A: Contact the support team with the device's S/N to resolve the issue.
- Q13: Shall I connect my device to the Internet/ Wi-Fi all the time?
- A: No, not all the time. You only need it for registration and updates. Some special vehicles (e.g., Peugeot) require an internet connection for advanced features like ECU Programming.
- Q14: Does your tools can support all the functions on all vehicles?
- A: Our tools are comprehensive but cannot perform all functions on all vehicles, similar to other scan tools or even factory scanners. Vehicle compatibility and available functions vary by make, model, and configuration.
10. User Tips
- The XTOOL D5S is generally easy to use and works great for diagnostics.
- It can generate PDF fault reports, which is useful for documentation.
- The device is durable and well-built.
- If you need to change the language, contact the seller's technical service with your device's serial number (S/N) for prompt assistance.
- Always confirm compatibility for specific car models and functions with the seller before purchasing or performing critical operations.
- Update the software immediately upon receiving the device to ensure you have the latest features and vehicle coverage.
11. Specifications
| Item | Description/Specification |
|---|---|
| Display | 5.45 Inch (1440*720 Resolution) |
| Operating System | Linux |
| Protocols Supported | CAN FD/FCA |
| Processor | Dual-core 1.2GHz |
| Memory | 128M+32G |
| Connectivity | Type-C |
| Operating Method | Flat Panel Touchscreen |
| Upgrade Method | Device Connects to Wi-Fi for Online Upgrade |
| Battery | 3150mAh 3.6V |
| Wi-Fi | 2.4G/5Ghz |
| Tested Battery Life | 3.5 Hours |
| Dimensions | 19.5*2.8*11.5(CM) |
| Free Renewal Update | Lifetime |
| Charging Method | Type-C Charging (No charger included) |
| Sensor | Gravity/ Light Sensor |
| Audio | Microphone |
| Speaker | Built-In Speaker |
| Weight (Including Battery) | 0.4KG |
| Gross Weight | 0.8KG |
| Operating Temp Range (Ambient) | -4°F ~ 140°F (-20°C ~ 60°C) |
| Storage Temp (Ambient) | -40°F ~ 158°F (-40°C ~ 70°C) |
| Operating Humidity | <90% |
Package Contents:
Image: Contents of the XTOOL D5S package.
- 1 PC X D5S Tablet
- 1 PC X Diagnostic Main Line (VAG to OBD-II-16 Main Cable)
- 1 PC X Charging Cable (USB Type-C Main Cable)
- 1 PC X Quick User Guide
- 1 PC X Packing List
- 1 PC X Color Carton
12. Warranty & Support
12.1 Limited Two-Year Warranty
Shenzhen XTOOL Tech Intelligent Co., LTD. (the Company) warrants to the original retail purchaser of this XTOOL device that should this product or any part thereof prove defective in material or workmanship during normal usage and under normal conditions within two years from the date of purchase, such defect(s) will be repaired or replaced (with new or rebuilt parts) with Proof of Purchase, at the Company's option, without charge for parts or labor directly related to the defect(s).
The Company shall not be liable for any incidental or consequential damages arising from the use, misuse, or mounting of the device.
This warranty does not apply to:
- Products subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation/repair or, improper storage.
- Products whose mechanical serial number or electronic serial number has been removed, altered, or defaced.
- Damage from exposure to excessive temperature or extreme environmental conditions.
- Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company.
- Defects in appearance, cosmetic, decorative, or structural items such as framing and non-operating parts.
- Products damaged from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft, or improper usage of any electrical source.
12.2 Technical Assistance & Contact Information
For technical assistance, product training videos, or to check vehicle compatibility, please visit the official website or contact support:
- Website: https://www.xtoolonline.com
- Email: support@xtoolonline.com
- User Manual (PDF): For a detailed user manual, you can refer to the official PDF document.