1. Important Safety Instructions
WARNING
- Features bidirectional measurement and remote data transmission for safe and orderly energy monitoring.
- Non-explosion-proof device. Do not operate in environments with flammable gases, vapors, or explosive dusts.
SAFETY INFORMATION
- Please use this product in accordance with the instructions in this manual.
- Do not disassemble this product by yourself.
- Pay attention to the rated voltage for use.
2. Product Overview
The EARU Smart WiFi/Zigbee Energy Meter (Model: PC311-Z-TY) is designed for real-time monitoring of electricity consumption. It supports bidirectional measurement and remote data transmission, allowing you to track energy usage, voltage, current, power factor, active power, and frequency via the Tuya Smart or Smart Life app. This device is compatible with WiFi and Zigbee networks, and integrates with Google Assistant and Amazon Alexa.
3. Specifications
| Feature | Specification |
|---|---|
| Model Number | PC311-Z-TY |
| Rated Voltage | AC90-250V (Output), AC80-250V (Rated) |
| Phase | Single Phase L+N or L+L |
| Frequency | 50/60Hz |
| Measure Range (Max Operating Current) | 80A / 120A / 200A / 300A |
| Metering Accuracy Class | Class I (1%) |
| Display Type | Digital Only |
| WiFi Frequency | 2.4G |
| App Compatibility | Tuya Smart, Smart Life |
| Operating Temperature | -20°C to +55°C (Ambient: -10°C to 50°C) |
| Certification | CE |
| Dimensions (Main Unit) | 46mm x 46mm x 18mm |
| DIN Rail Mount Dimensions | 37mm x 38mm |
4. Setup
4.1 Physical Installation
- Mount the energy meter on a DIN rail within your electrical panel or distribution box.
- Ensure the power supply to the circuit you are monitoring is turned off at the main breaker before proceeding with any wiring.
4.2 Wiring Instructions
Carefully follow the wiring diagram and instructions below to connect the energy meter and CT clamps.
- Power Connection: Connect the AC input line (Live 'L' and Neutral 'N') to the corresponding terminals on the energy meter (Input: 90-250VAC 50/60Hz).
- CT Clamp Connection:
- Open the CT clamp. You will see an arrow (P1→P2 or K→L) inside or on the sticker outside the clip. This arrow indicates the direction of current measurement. The CT supports bidirectional sensing.
- Connect the CT clamp wires to the 'Circuit 1' (1-, 1+) and 'Circuit 2' (2-, 2+) terminals on the energy meter.
- Apply the CT clamp to the cable you wish to monitor. Ensure the direction of the CT arrow is correct based on whether you are measuring energy 'From Grid', 'To Grid', 'From Inverter', or 'To Load'.
4.3 App Setup and Device Pairing
Follow these steps to pair your energy meter with the Tuya Smart or Smart Life app:
- Download and install the 'Tuya Smart' or 'Smart Life' app from your smartphone's app store.
- Register or log in to your account.
- Ensure your smartphone is connected to a 2.4GHz Wi-Fi network (5GHz networks are not supported for initial pairing).
- Power on the EARU Energy Meter. The device's indicator light should be blinking, indicating it's in pairing mode. If not, refer to the device's reset instructions (usually holding a button for a few seconds).
- In the app, tap the '+' icon in the top right corner to add a device.
- Select 'Add Device' manually, then navigate to 'Electrical' and choose 'Socket (Wi-Fi)' or 'Power Strip (Wi-Fi)' as a general category, or search for 'Energy Meter'.
- Confirm the indicator light is blinking rapidly.
- Enter your Wi-Fi network password when prompted.
- The app will begin searching for and adding the device (e.g., 'PC311_TY').
- Once successfully added, you can rename the device and assign it to a room.
5. Operating the Energy Meter
5.1 Real-time Monitoring
Once connected, open the Tuya Smart or Smart Life app and select your energy meter device. You will see various real-time data:
- Total Forward Energy: Cumulative energy consumed.
- Total Generation: Cumulative energy generated (if applicable, e.g., from solar).
- Circuit 1 / Circuit 2: Detailed readings for each connected CT clamp, including:
- Forward Energy (kWh)
- Generation (kWh)
- Current (A)
- Active Power (W)
- Voltage (V)
- Frequency (Hz)
- Power Factor
- Usage History: View daily, monthly, or yearly energy consumption/generation data.
5.2 Two-Phase Current Measurement
The device can measure and display forward and reverse current for each circuit, allowing for comprehensive monitoring of energy flow in both directions.
6. Maintenance
- Keep the device clean and free from dust. Use a dry, soft cloth for cleaning.
- Periodically check all wiring connections to ensure they are secure.
- Do not expose the device to extreme temperatures or humidity.
- Do not attempt to repair or modify the device yourself. Contact support if issues arise.
7. Troubleshooting
- Device not pairing:
- Ensure your Wi-Fi network is 2.4GHz.
- Check if the device is in pairing mode (indicator light blinking rapidly).
- Move the device closer to your Wi-Fi router.
- Restart your Wi-Fi router and try again.
- Incorrect readings:
- Verify that the CT clamps are installed correctly and the arrow direction matches your measurement intent (e.g., P1→P2 for 'From Grid').
- Ensure the CT clamps are fully closed around the cable.
- Check that the CT clamp wires are securely connected to the meter's terminals.
- App not showing data:
- Check your internet connection.
- Ensure the device is powered on and connected to Wi-Fi.
- Restart the app.
8. User Tips
- Optimal Wi-Fi Signal: For consistent data, ensure the energy meter is installed in an area with a strong 2.4GHz Wi-Fi signal.
- CT Clamp Orientation: Pay close attention to the arrow on the CT clamps. Incorrect orientation will result in negative or inaccurate readings, especially for generation or bidirectional flow.
- Cable Selection: Ensure the CT clamp is placed around the correct phase wire (Live) for accurate measurement. Avoid clamping multiple wires unless specifically intended for a combined measurement.
- Data Export: Explore the app's features for data export if you need to analyze your energy consumption over longer periods in external tools.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original seller or refer to the product listing page. Keep your purchase receipt as proof of purchase.