Lemorele HD10

Contents

Lemorele Type C/USB3.0 to Dual HDMI Adapter User Manual

Model: HD10

1. Introduction

The Lemorele Multi-Function USB-C/USB 3.0 Hub is designed to provide a comprehensive expansion solution for your laptop, tablet, and other compatible devices. It enables you to connect two external HDMI displays, supporting resolutions up to 1080P at 60Hz, enhancing productivity and visual experience. This adapter is compatible with both Windows and macOS systems, including Apple M1/M2 Macs.

Lemorele USB A/Type C to Dual HDMI Adapter

Image: Lemorele USB A/Type C to Dual HDMI Adapter, highlighting 1080p 60Hz capability.

2. Package Contents

Please ensure all items are present:

  • 1 x Lemorele Type C/USB3.0 to Dual HDMI Adapter (Model HD10)

3. Specifications

Model NumberHD10
Brand NameYEHUA / Lemorele
Interface TypeUSB Type-C / USB 3.0
StandardUSB 3.0
FunctionHDMI-Compatible (Dual HDMI Output)
Ports2 (HDMI)
Max Resolution1080P @ 60Hz
Cable Length60cm (24 inches)
Dimensions (Adapter Body)1.2cm (0.47in) x 4.3cm (1.69in) x 6cm (2.4in)
PackageYes
OriginMainland China
High-concerned ChemicalNone
Adapter dimensions

Image: Detailed dimensions of the adapter and cable length.

4. Setup & Installation

4.1. Compatibility

The adapter offers wide compatibility with various devices and operating systems:

  • Laptops: MacBook Pro/Air, MacBook M1/M2, Surface Book, ThinkPad, Dell XPS, and more.
  • Displays: HDTVs, Televisions, Monitors, Projectors.
  • Operating Systems: Windows 10 and above, macOS 10.15 and above.
Wide compatibility diagram

Image: Diagram illustrating wide compatibility with various laptops and display types, including Windows and macOS.

4.2. Driver Installation (macOS Only)

For macOS systems, this product requires driver installation to enable multi-stream transport (MST) functionality. Please follow the steps below or refer to the video demonstration:

  1. Connect the adapter to your MacBook.
  2. If prompted, click 'Settings' to allow screen recording permissions.
  3. Navigate to 'System Settings' > 'Privacy & Security' > 'Screen Recording'.
  4. Locate 'UDisplay' or similar extension and toggle the switch to 'On'.
  5. Enter your computer password to unlock and modify settings.
  6. Click 'Quit & Reopen' if prompted.
  7. Click on the CD drive icon (UDisplay) that appears in your menu bar or desktop.
  8. Click to install the UDisplay application.
  9. Once installed, the UDisplay application will manage your display settings.
macOS MST support and driver installation note

Image: MacBook setup with two external monitors, indicating macOS Multi-Stream Transport support and driver installation requirement.

4.3. Physical Connection

  1. Connect the USB-C or USB 3.0 connector of the adapter to the corresponding port on your laptop or compatible device.
  2. Connect your primary HDMI display to one of the HDMI ports on the adapter using an HDMI cable.
  3. Connect your secondary HDMI display to the other HDMI port on the adapter using an HDMI cable.
  4. Ensure all connections are secure.

5. Operating Instructions

5.1. Windows Mirroring and Extended Display

To configure your display settings on Windows:

  1. Press the Win + P keys simultaneously to open the Project menu.
  2. Select your desired display mode:
    • Duplicate: Mirrors your laptop screen to all connected external displays.
    • Extend: Extends your desktop across all connected displays, providing more screen real estate.
    • Second screen only: Displays content only on the external screen(s).
  3. Alternatively, go to System Settings > Display to adjust resolution, orientation, and arrangement of your screens.

5.2. macOS Mirroring and Extended Display

To configure your display settings on macOS:

  1. Open System Settings (or System Preferences on older macOS versions).
  2. Click on Displays.
  3. Here you can arrange your displays, change resolutions, and select mirroring or extended desktop modes.
  4. Extend mode (A-B-C): Provides three distinct screens (laptop and two external monitors).
  5. Extend mode (A-A-B): Mirrors your laptop screen to one external display, and extends to the second external display.
  6. Extend mode (A-A-A): Mirrors your laptop screen to both external displays.
macOS display modes

Image: Visual representation of macOS display modes: A-B-C (extended), A-A-B (partial mirror/extend), and A-A-A (all mirrored).

5.3. Video Demonstration

Watch this official video for a step-by-step guide on setup and multi-screen configuration:

Video: Demonstration of connecting the adapter, installing drivers on macOS, and configuring extended display modes.

6. Maintenance

To ensure the longevity and optimal performance of your Lemorele Dual HDMI Adapter:

  • Keep the adapter clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Do not drop or subject the adapter to strong impacts.
  • Disconnect the adapter when not in use for extended periods.

7. Troubleshooting

Display Issues

  • No display when connecting to an HDMI monitor: Ensure your laptop's USB-C port supports audio and video output. If it does, try disconnecting the HUB, shutting down the laptop, holding the power button for 40 seconds to discharge static electricity, then reconnect.
  • MacBook triple-screen extended display not achieved: macOS does not support MST (Multi-Stream Transport) technology. Only mirroring (AAA) or duplicating the same extended display (ABB) is supported.
  • Cannot set a higher resolution with multiple HDMI monitors: On Windows, max resolution is 1080P @60Hz. For a single HDMI monitor, resolution depends on laptop/monitor capabilities (max 4K @30Hz). On macOS, max resolution is 4K @30Hz.
  • VGA monitor resolution: VGA supports up to 1080P @60Hz. In extended mode, VGA display follows the HDMI port next to it.

Connection & Compatibility

  • Cannot connect a USB-C monitor: The HUB's USB-C PD port is for power input only. The USB-C data port is for storage devices only. Use HDMI for monitors.
  • Using a USB-A adapter: Not recommended. Using a USB-A to USB-C adapter will cause HDMI and other ports to malfunction.
  • USB-C extension cable: May weaken the signal. Not recommended for optimal performance.

Audio & Peripherals

  • No audio from 3.5mm device: Confirm laptop's USB-C port supports audio/video. Switch laptop's audio output to LCD or HDMI. Some monitors may lack audio drivers.
  • 3.5mm audio port for microphone input: No, it only supports audio output.
  • USB-C headphones: Not supported. Use USB-A or 3.5mm audio port.
  • External hard drive not recognized or connection drops: External hard drives may draw too much power. Use a PD power adapter connected to the HUB's USB-C PD port for stable power.
  • SD card not read: Check if the SD card is inserted correctly and its file format is compatible with the device.

Power & Charging

  • No charging indication with PD power adapter: Confirm laptop's USB-C port supports PD charging and check power adapter connection. Try a different PD power adapter.
  • Slow charging: The HUB requires at least 13W. Use a higher wattage PD adapter (preferably up to 100W) to ensure sufficient power for both the HUB and laptop.

Other Issues

  • Driver installation required: The HUB is plug-and-play and generally does not require manual driver installation, except for macOS which requires a specific driver for MST functionality.
  • Ethernet connection intermittently disconnecting: Check cable, IP conflicts, and update network drivers from the official website.

8. User Tips

  • This adapter works effectively for connecting additional screens via USB-C/USB 3.0.
  • It is normal for the adapter to generate some heat during operation, especially under heavy load.

9. Precautions

  • Ensure your device supports USB-C audio/video output, data transfer, and PD power delivery functions.
  • Avoid connecting the HUB via a USB-A to USB-C adapter or a USB-C extension cable, as this may affect functionality.
  • The USB-C PD port is for power input only. The USB-C data transfer port is for USB-C storage devices only.
  • Use a 100W PD charger (87W for laptop, 13W for hub).
  • When connecting to a Switch, use its power adapter or one with 45W or higher.
  • Do not expose the device to humid or high-temperature environments.
  • Ensure sufficient wattage from your power adapter when connecting multiple high-power devices.
  • Avoid frequent plugging and unplugging cables to prolong device lifespan.

10. Support

If you need assistance, you can contact Lemorele support by following these steps:

  1. Log in to your account and go to

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.