AKKO 5108B Plus

Contents

Akko 5108B Plus Mechanical Gaming Keyboard User Manual

Model: 5108B Plus | Brand: AKKO

Introduction

This manual provides comprehensive instructions for the Akko 5108B Plus Mechanical Gaming Keyboard. It covers setup, operation, customization, maintenance, and troubleshooting to help you get the most out of your keyboard.

Akko 5108B Plus Mechanical Gaming Keyboard

Figure 1: Akko 5108B Plus Mechanical Gaming Keyboard, showcasing its full layout and RGB lighting.

Key Features

The Akko 5108B Plus keyboard is designed with advanced features for an enhanced typing and gaming experience:

  • ISO Layout: Standard international layout for various regions, including ISO-DE, ISO-UK, and ISO-Nordic.
  • Tray Mount Structure: Provides a stable typing platform.
  • Multi-modes Connectivity: Supports Bluetooth 5.0, 2.4GHz wireless, and USB Type-C wired connections.
  • RGB Backlit: Customizable per-key RGB lighting with over 20 effects.
  • PBT Double-shot Keycaps: Durable keycaps with legends that won't fade.
  • Hot Swappable: Equipped with premium hot-swappable sockets, allowing users to swap desirable 3-pin and 5-pin mechanical switches (MX style) afterwards.
  • N-Key Rollover: Ensures all key presses are registered accurately.
  • Wide Compatibility: Supports Windows, macOS, iOS, and Android operating systems.
  • Programmable: Keys and lighting effects can be customized via Akko Cloud Driver software.
Akko 5108B Plus Key Features Icons

Figure 2: Icons representing key features: ISO Layout, Tray Mount, Multi-modes, RGB Backlit, PBT Double-shot, Hot Swappable, N-Key Rollover, Mac & Win & ISO & Android compatibility, and Programmable keys.

Akko 5108B Plus Switch Support

Figure 3: The keyboard supports 3/5 Pin Mechanical Switches with MX Style. It is equipped with hot-swappable sockets. Shown are Akko V3 Cream Yellow Pro (Linear, lower noise) and Akko V3 Cream Blue Pro (Tactile, with haptic bump) switches.

Setup Guide

1. Initial Connection and Mode Selection

The Akko 5108B Plus supports three connection modes: Bluetooth 5.0, 2.4GHz wireless, and USB Type-C wired. A switch on the back of the keyboard allows you to select the operating system mode (Windows/Mac) and power state.

Akko 5108B Plus 3 Modes Connection

Figure 4: Three connection modes: Bluetooth 5.0 (for tablets, computers, mobile phones), 2.4GHz Receiver (low latency for gaming/typing), and Wired Mode (consistent, fast response for FPS gaming).

2. Wired Mode Setup

  1. Connect the provided USB Type-C cable to the keyboard's port.
  2. Connect the other end of the cable to an available USB port on your computer.
  3. The keyboard will be automatically recognized by your system.
  4. Ensure the switch on the back is set to the middle position (USB mode) or the appropriate OS mode if using wired for customization.

3. Bluetooth Mode Setup

The keyboard supports Bluetooth 5.0 and Bluetooth 3.0 profiles. You can pair up to 3 Bluetooth devices.

  1. Switch to Bluetooth Mode:
    • Unplugged: If the keyboard is unplugged, push the switch on the back to the left (Windows) or right (Mac) mode.
    • Plugged In: If the keyboard is plugged into the computer via USB, it will automatically enter Bluetooth mode without needing to push the back switch.
  2. Enable Bluetooth Pairing: Long press and hold Fn + E, Fn + R, or Fn + T for at least 3 seconds. The blue LEDs under the corresponding key (E, R, or T) will flash quickly, indicating pairing mode.
  3. Select Bluetooth Profile: The keyboard is equipped with both Bluetooth 5.0 and 3.0 frameworks.
    • Bluetooth 5.0 device names: Akko 5108 BT-1, Akko 5108 BT-2, Akko 5108 BT-3.
    • Bluetooth 3.0 device name: AKKO 5108 BT3.0.
    When searching for Bluetooth devices on your PC, tablet, or smartphone, you will see these options. Select the preferred group. (Note: Some devices may only detect Bluetooth 5.0 groups).
  4. Connect: On your device, select the appropriate Akko 5108 Bluetooth device to connect. The LED will stop flashing once connected.

Note: The system will memorize the last connected device before you turn off Bluetooth mode.

4. 2.4GHz Wireless Mode Setup

  1. Plug the 2.4GHz USB receiver into an available USB port on your computer.
  2. On the keyboard, press Fn + Y. The green LED under the Y key will flash slowly, indicating connection mode.
  3. The keyboard should automatically connect to the receiver. The LED will stop flashing once connected.

Operating Instructions

1. Hotkeys (Windows)

These key combinations provide quick access to various functions in Windows. Note that combinations may change with system updates.

CombinationFunction
Fn + F1File Explorer
Fn + F2E-mail
Fn + F3Windows Search
Fn + F4Browser Homepage
Fn + F5Media Player
Fn + F6Pause / Playback
Fn + F7Previous Song
Fn + F8Next Song
Fn + WSwap WASD with Arrow Keys (↑↓←→)

2. System Commands (Windows)

CombinationFunction
Fn + Left WinLock Windows Key
Press & Hold Left Win + Right Win (5s)Restore Factory Settings
Hold Down Fn + Right CtrlRevert Ctrl into Menu (APP) key

3. System Commands (Mac)

CombinationFunction
F1Decrease display brightness
F2Increase display brightness
F3Open mission control
F4Activate Siri
F7Skip back (Audio)
F8Pause/Play (Audio)
F9Skip forward (Audio)
F10Mute
F11Volume down
F12Volume up
Right WinCommand
Right AltOption
Left WinCommand
Left AltOption
Fn + (F1 ~ F12)Activates F1-F12 functions

4. Backlight Settings

Adjust the RGB backlight effects and brightness using the following combinations:

CombinationFunction
Fn + InsCycle through Backlight Effects 1, 2, 3
Fn + HomeCycle through Backlight Effects 4, 5, 6
Fn + PgUpCycle through Backlight Effects 7, 8, 9, 10
Fn + DelCycle through Backlight Effects 11, 12, 13
Fn + EndCycle through Backlight Effects 14, 15, 16
Fn + PgDnCycle through Backlight Effects 17, 18, 19, 20
Fn + LLight On/Off
Fn + ↑Increase Brightness
Fn + ↓Decrease Brightness
Fn + ←Set animation direction to left
Fn + →Set animation direction to right
Fn + -Slower Animation Speed
Fn + +Faster Animation Speed

5. RGB Customization & Key Programming

The Akko 5108B Plus keyboard supports full RGB customization and key remapping through the Akko Cloud Driver software.

  1. Download Driver: Download the Akko Cloud Driver from the official Akko website: en.akkogear.com.
  2. Wired Mode Required: Key/lighting effects customization must be completed in wired mode with the Akko driver.
  3. Music Rhythm Effects: In wired mode, the lighting effects can also achieve music rhythm synchronization with the Akko driver.
Akko Cloud Driver Software Interface for RGB Customization and Key Programming

Figure 5: Akko Cloud Driver interface for RGB customization and key programming. The software allows for firmware upgrades, RGB and key customization including Fn re-programming and Alt-Fn hot-keys, and offers more than 20 lighting effects.

Maintenance and Care

  • Cleaning: Use a soft, lint-free cloth to wipe the keyboard surface. For deeper cleaning, you can use a can of compressed air to remove dust and debris from between the keycaps. For keycaps, a mild soap solution on a cloth can be used, ensuring no liquid enters the keyboard.
  • Keycap Removal: If you wish to clean under the keycaps or replace them, use a keycap puller. Gently pull the keycap straight up.
  • Switch Care: The keyboard features hot-swappable switches. If a switch needs replacement, use a switch puller to carefully remove it. Ensure proper alignment when inserting a new switch to avoid bending pins.
  • Storage: When not in use for extended periods, store the keyboard in a dry, dust-free environment.
  • Avoid Liquids: Keep liquids away from the keyboard to prevent damage to electronic components.

Troubleshooting

1. Connectivity Issues

  • Wired Mode: Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
  • 2.4GHz Wireless: Ensure the USB receiver is properly plugged in. Try plugging it into a different USB port. Make sure the keyboard is in 2.4GHz mode (Fn + Y).
  • Bluetooth:
    • Ensure Bluetooth is enabled on your device and the keyboard is in pairing mode (Fn + E/R/T).
    • If connection issues persist, try resetting the keyboard's Bluetooth memory.

2. Keyboard Not Responding / Keys Not Working

  • Check the connection (wired, 2.4GHz, or Bluetooth).
  • Ensure the keyboard battery is charged if using wireless modes.
  • Try restoring factory settings (Press & Hold Left Win + Right Win for 5 seconds).
  • If specific keys are not working, check if the switches are properly seated or try swapping them with a known working switch (due to hot-swappable feature).

3. Bluetooth Device Switching / Reset

  • Switching Devices: After pairing multiple Bluetooth devices, quickly switch between them by pressing Fn + E, Fn + R, or Fn + T.
  • Resetting Bluetooth: If you forget a specific paired device or experience disorder in Bluetooth connection, you'll need to clear your computer's Bluetooth cache by removing the

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.