1. Introduction
The RMshebei RMDZW-3PNB 100A 485 is a smart circuit breaker designed for comprehensive power management and protection. It integrates features such as over/under voltage protection, overcurrent protection, leakage protection, temperature protection, energy metering, and remote control capabilities via mobile applications. This device is suitable for various applications, including household electricity management, power distribution rooms, and site equipment control.
This manual provides detailed instructions for the installation, operation, and maintenance of your smart circuit breaker. Please read it carefully before use to ensure safe and efficient operation.

2. Key Features
- Remote Control: Power on/off the circuit breaker via mobile phone or computer from anywhere.
- Voice Control: Compatible with AI speakers like Amazon Alexa and Google Assistant.
- Timing Schedule: Set up timing modes, countdowns, and cycle timers for automated operation.
- Electricity Metering: Monitor electricity consumption (kWh) and generation (for PV systems).
- Over/Under Voltage Protection: Adjustable thresholds to prevent damage from unstable voltage.
- Over Current Protection: Adjustable current limits to protect against overload.
- Residual Current (Leakage) Protection: Detects and protects against leakage currents.
- High Temperature Protection: Automatically shuts down if the device temperature exceeds a set threshold.
- Phase Protection: Includes three-phase current unbalance protection, phase-loss protection, and reverse phase sequence protection.
- Prepaid Functionality: Manage energy consumption with a prepaid mode, allowing top-up and automatic shutdown when power runs out.
- Data Monitoring: View real-time current, power, voltage, and historical energy statistics (hourly, daily, monthly, yearly).
- Modbus RTU Protocol: Supports Modbus RTU for industrial communication.
- Centralized Control: Enables centralized control within organizational networks.
- Device Sharing: Share control of the device with multiple users.

3. Technical Specifications
| Parameter | Specification |
|---|---|
| Rated Voltage | 380 V |
| Operating Voltage | AC80V-300V (per phase) |
| Working Frequency | 50/60Hz |
| APP Share | Multiple users |
| Installation Type | 35mm DIN Rail |
| Electrical Life | 105 cycles |
| Mechanical Life | 105 cycles |
| Protection Level | IP20 |
| Pollution Level | 3 |
| Altitude | <2000m |
| Working Humidity | ≤50% at 40°C (non-condensing) |
| Measurement Error | 1% |
| Over/Under Voltage Trip Delay | 0.5s |
| Reclosing Delay | 10s-99s |
| Voltage Measurement Accuracy | 1% (within total range) |
| Rated Insulation Voltage | 400V |
| Output Contact | 1NO |

4. Setup Guide
4.1. Installation
The RMshebei Smart Circuit Breaker is designed for DIN-Rail mounting, ensuring convenient installation in standard electrical panels.

Wiring Instructions: Connect the incoming power lines to the top terminals (L1, L2, L3, N) and the outgoing load lines to the bottom terminals (L1, L2, L3, N). Always ensure power is off before performing any wiring.
4.2. App Installation and Device Pairing
- Download the App: Use your smartphone to scan the QR codes below or search for "Smart Life" or "Tuya Smart" app in Google Play Store or Apple App Store.

Scan to download Smart Life or Tuya Smart app. - Create an Account: Register an account using your mobile number within the app.
- Connect to Wi-Fi: Ensure your mobile phone is connected to a 2.4 GHz Wi-Fi network.
- Enter Pairing Mode: On the circuit breaker, press and hold the third button (Wi-Fi button) for 5 seconds until the Wi-Fi indicator starts flashing quickly.
- Add Device in App:
- Open the Smart Life or Tuya Smart app.
- Click the "+" button in the upper right corner of the homepage.
- Select "Add Device".
- Choose "Breaker" or "Switch module (Wi-Fi)" from the "Energy" category.
- The app will search for nearby devices. Once detected, tap on the device.
- Enter your Wi-Fi password to connect the device to your network.
- The Wi-Fi indicator on the circuit breaker will change from flashing to a steady light once connected.
5. Operating Instructions
5.1. Remote Control (ON/OFF)
Once paired with the app, you can remotely turn the circuit breaker on or off from anywhere with an internet connection. Simply open the app and tap the power icon to toggle the switch.

5.2. Energy Monitoring
The device provides detailed energy consumption and generation data. You can view:
- Real-time Data: Current (A), Power (kW), Voltage (V).
- Historical Data: Electricity usage per hour, day, month, or year.
- Forward and Reverse Currents:
- Forward Current: Power consumption input from the grid.
- Reverse Current: Power input from a solar panel to the grid (for PV metering).
5.3. Prepaid Recharge Management
The prepaid mode allows you to manage your energy consumption by topping up power. When enabled, the device will automatically switch off when the prepaid power runs out. You can also clear the power level with a single click.
- Navigate to the "Expense Management" section in the app.
- Enter the default password "0000" (which can be changed in settings).
- Toggle "Prepayment enable" to ON.
- Use "Charge energy" to top up the power (recharge range 0-999999 kWh).
- Use "Clear energy" to reset the balance.
5.4. Timing Module
Automate your circuit breaker operations using the timing module:
- Countdown: Set a specific time for the device to turn on or off.
- Schedule: Create daily or weekly schedules for power on/off.
- Cycle Time: Set recurring on/off cycles.
- Inching: Configure the device to turn on for a short period and then automatically turn off.

5.5. Voice Control
Integrate your smart circuit breaker with voice assistants like Amazon Alexa or Google Assistant for hands-free control. Once linked, you can use voice commands to turn the device on or off.

6. Protection Settings
The device offers various adjustable protection functions to safeguard your electrical system. These settings can be configured in the "Alarm Settings" section of the app.

- High Temperature Alarm: Set a threshold (default 85°C, range 10-85°C). If the circuit breaker's temperature exceeds this, it automatically shuts down to prevent fire.
- Leakage Current: Set a leakage alarm threshold (default 30mA, range 10-99mA). The device automatically shuts down if leakage current is detected.
- Over Current Protection: Set an overload current threshold (default 80A, range 1-100A). You can also set a delay time for overcurrent protection and recovery.
- Overvoltage Alarm: Set an overvoltage alarm threshold (default 275V, range 120-300V) for each phase.
- Undervoltage Alarm: Set an undervoltage alarm threshold (default 175V, range 80-210V) for each phase.
- Three-phase Current Unbalance Alarm: Set a threshold (default 20%, range 10-100%) to protect against current imbalances.
- Three-phase Lack of Phase Alarm: Protects against phase loss.
- Reverse Phase Sequence Alarm: Protects against incorrect phase sequencing.
- Voltage Three-phase Imbalance Alarm: Protects against voltage imbalances.
- Lost Flow Alarm: Set a threshold (default 10A) for lost current protection.
- Reclosing Settings: Configure reclosing allowed times (default 30) and reclose recover seconds (default 20).
- Power-on Delay: Set power-on delay time (default 5s).
- Password Settings: Change the prepayment password from the default "0000".
7. User Tips
- Protocol Compatibility: The RS485 interface uses the MODBUS RTU protocol for communication, which is standard for many industrial and smart home systems.
- Wi-Fi Connection Stability: Ensure your Wi-Fi network is stable and within range for reliable remote control and data monitoring. If connection issues occur, try restarting both the circuit breaker and your router.
- Password Security: Always change the default prepayment password to a strong, unique password to prevent unauthorized access.
- Protection Thresholds: Carefully set protection thresholds according to your specific electrical system requirements and local regulations to avoid nuisance tripping or insufficient protection.
8. Troubleshooting
- Device not connecting to Wi-Fi:
- Ensure your Wi-Fi network is 2.4 GHz. 5 GHz networks are not supported.
- Check if the Wi-Fi password entered is correct.
- Make sure the device is in pairing mode (flashing Wi-Fi indicator).
- Move the device closer to your Wi-Fi router.
- Restart your router and try pairing again.
- Device not responding to app commands:
- Verify that the device is connected to Wi-Fi (steady Wi-Fi indicator).
- Check your internet connection on your phone.
- Ensure the app is updated to the latest version.
- Circuit breaker trips unexpectedly:
- Check the alarm records in the app to identify the cause (e.g., overvoltage, overcurrent, leakage).
- Review your protection settings to ensure thresholds are appropriate for your load.
- If a high temperature alarm is triggered, ensure adequate ventilation around the device.
- Energy data not updating:
- Ensure a stable Wi-Fi connection.
- Refresh the app or restart it.
9. Maintenance
- Cleaning: Regularly wipe the exterior of the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Ventilation: Ensure the installation area has adequate ventilation to prevent overheating.
- Firmware Updates: Check the app periodically for firmware updates to ensure optimal performance and security.
- Safety Checks: Periodically inspect wiring connections for tightness and signs of wear or damage.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.
A user manual in PDF format is available for download: User Manual (PDF)