BQCC 7" HD Car MP5 Player User Manual

1. Introduction

Thank you for choosing the BQCC 7" HD Car MP5 Player. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before installation and use.

2. Package Contents

Please check the package for the following items:

BQCC 7" HD Car MP5 Player (Model F9070W)
Power Harness (VW specific)
Remote Control
GPS Antenna
USB Cables
Audio/Video Cables
User Manual (this document)
Optional: Reversing Camera (if purchased with the unit)

Package contents of the BQCC F9070W car MP5 player including the main unit, wiring harness, remote control, GPS antenna, and cables. — Figure 2.1: Included components in the package.

3. Specifications

Feature	Specification
Model Name	F9070W
Brand Name	BQCC
Display Size	7"
Resolution	1024x600
Output Power	60Wx4
Voltage	12V
OSD Language	English
Radio Frequency Range	FM 87.5~108.0MHz, AM 522-1620KHz
Material Type	ABS+Metal
Item Weight	1.02kg
Item Size	220x130x30mm
Audio Output	2 channels (left + right)
Subwoofer Output	1 channel
Video Output	1 channel
Audio Input	2 channels (left + right)
Video Input	2 channels
Reversing Video Input	1 channel
Audio Format Support	MP3/AAC/APE/OGG/M4A/RA/WAV
Video Format Support	H263/H264/H265/DIVX HD/AVI/FLV/MKV/MPEG/MP4/WMV9/VC/ASF/TS/QT
Image Format Support	JPEG/PNG/BMP/GIF/TIFF

4. Setup and Installation

4.1 Safety Precautions

Disconnect the car battery's negative terminal before installation to prevent electrical shorts.
Ensure all wiring is correctly connected to avoid damage to the unit or vehicle.
If you are unsure about the installation process, seek professional assistance.

4.2 Wiring Instructions (VW Specific)

The unit comes with two power cords (A and B). Select the one that matches your original car's power plug. The wiring method depends on whether your car has CANBUS integration.

VW Wiring Instructions diagram showing two power harness options (A and B) and two connection methods based on CANBUS presence. — Figure 4.1: VW Wiring Instructions. This diagram shows two main power harness types (A and B) and two connection scenarios: one requiring a protocol box (CANBUS) and one that does not. For CANBUS connection, plug in the CANBUS module and connect its 8P socket to the machine's rear, ensuring the two black buckles are disconnected. For non-CANBUS connection, connect the two black buckles together and do not plug in the 8P socket. If the unit does not power on/off correctly, try connecting or disconnecting the CANBUS.

With Steering Wheel Buttons/Door Info/AC Info (CANBUS):
- Your original car has a CAN line.
- Plug in the CANBUS module.
- Connect the other end of the CANBUS line to the 8P socket on the back of the machine.
- Important: The two black buckles on the harness must be disconnected. Failure to do so will prevent the machine from shutting down and will drain the battery.
Without Steering Wheel Buttons/Door Info/AC Info (No CANBUS):
- Your original car does not have a CAN line.
- Connect the two black buckles on the harness together.
- Important: Do not connect the CANBUS module and do not plug the 8P plug into the back of the machine. Failure to do so will prevent the machine from shutting down and will drain the battery.

Note: Some models may have original cars without steering wheel buttons but with CAN lines. If the machine does not turn on or off after wiring, please connect or disconnect the CANBUS to try.

4.3 Physical Installation

Carefully remove your existing car radio/multimedia unit.
Connect the appropriate wiring harness from the BQCC unit to your car's wiring.
Connect the GPS antenna, USB cables, and any other accessories (like the reversing camera) to the corresponding ports on the back of the unit.
Slide the BQCC unit into the dashboard opening until it clicks into place or can be secured with mounting screws.
Reconnect the car battery's negative terminal.
Test the unit's functionality before fully reassembling the dashboard.

Rear view of the BQCC F9070W car MP5 player showing all input and output ports. — Figure 4.2: Rear panel connections. This image displays the various ports on the back of the unit, including power harness input, USB ports (USB1, USB2), video input (VIN), video output (VOUT), audio input (LIN, RIN), audio output (L-OUT, R-OUT), subwoofer output (SUB), reversing camera input (BACK-IN), GPS antenna port, and radio antenna port.

Side view of the BQCC F9070W car MP5 player showing mounting points. — Figure 4.3: Side view of the unit, illustrating its depth and mounting screw locations.

Another side view of the BQCC F9070W car MP5 player. — Figure 4.4: Opposite side view of the unit, showing additional mounting points and internal structure.

Front view of the BQCC F9070W car MP5 player with CarPlay interface displayed. — Figure 4.5: Front view of the unit, displaying the 7-inch touch screen with a CarPlay interface, physical buttons for menu, EQ, mute, power, mode, media, APS, band, and tune, along with volume and selection knobs, and front USB ports.

5. Operating Instructions

5.1 Basic Operations

Power On/Off: Press the POWER button.
Volume Control: Rotate the VOL knob.
Menu Navigation: Use the touch screen or the MENU button to access main functions.
Mode Selection: Press the MODE button to switch between Radio, Media, Bluetooth, CarPlay/Android Auto, etc.

5.2 Radio Function

Band Selection: Press the BAND button to switch between FM and AM bands.
Station Tuning: Use the TUNE knob or touch screen controls to scan for stations.
Automatic Scan (APS): Press the APS button to automatically scan and store radio stations.

5.3 Media Playback

USB Playback: Insert a USB drive into one of the USB ports. The unit will automatically detect and play compatible audio/video files.
Supported Formats: Refer to the Specifications section for supported audio, video, and image formats.
EQ Settings: Press the EQ button to adjust audio equalizer settings.

5.4 Bluetooth Connectivity

On the unit, navigate to the Bluetooth menu.
Enable Bluetooth on your mobile device and search for available devices.
Select "BQCC" (or similar name) from the list on your phone.
Confirm pairing on both devices. Default PIN is usually "0000" or "8888".
Once connected, you can make/receive calls and stream audio.

5.5 CarPlay / Android Auto / Mirrorlink

Wired Connection: Connect your smartphone to the unit via a USB cable. The unit should automatically detect and launch CarPlay or Android Auto.
Wireless CarPlay/Android Auto: Some models may support wireless connection. Follow on-screen prompts for initial setup.
Mirrorlink: Connect your smartphone via USB and select the Mirrorlink option on the unit to mirror your phone's screen.

BQCC F9070C model with wired Android Auto and CarPlay, Mirrorlink, Smart BT, 7 Color lights, FM Radio, RDS function. — Figure 5.1: Features of the F9070C variant, highlighting wired Android Auto and CarPlay, Mirrorlink, Smart Bluetooth, 7-color ambient lighting, FM Radio, and RDS function.

6. Maintenance

Cleaning the Screen: Use a soft, lint-free cloth to wipe the screen. For stubborn smudges, slightly dampen the cloth with water or a screen cleaner. Do not use abrasive cleaners.
General Cleaning: Keep the unit free from dust and debris. Use a soft brush or compressed air for hard-to-reach areas.
Software Updates: Check the manufacturer's website periodically for any available firmware updates to ensure optimal performance and new features.

7. Troubleshooting

Problem	Possible Cause	Solution
Unit does not power on.	Incorrect wiring; blown fuse; loose power connection.	Check power harness connections (refer to Section 4.2); check vehicle's fuse box; ensure battery is connected.
No sound.	Volume too low; mute function active; incorrect speaker wiring.	Increase volume; check if unit is muted; verify speaker connections.
Bluetooth not connecting.	Bluetooth not enabled on phone/unit; incorrect pairing process.	Ensure Bluetooth is on; retry pairing process (Section 5.4); try restarting both devices.
CarPlay/Android Auto not launching.	Faulty USB cable; phone not compatible; software issue.	Try a different USB cable; ensure your phone's OS is up to date; check phone settings for CarPlay/Android Auto.
Unit stays on after car is off.	Incorrect CANBUS wiring (for VW).	Review CANBUS wiring instructions (Section 4.2), specifically the black buckles.
Noise in wireless CarPlay audio.	Interference; signal quality.	Try wired CarPlay connection for better audio fidelity.
Stereo turns on when opening/closing doors.	CANBUS signal interpretation.	Check CANBUS settings in the unit's system menu; consult support if persistent.

If problems persist after trying these solutions, please contact customer support.

8. User Tips

VW Installation: For Volkswagen vehicles, ensure you correctly manage the small red wire connector. If the unit stays on after the car is off, it's likely due to this connection. Refer to the wiring diagram carefully.
Audio Quality: For the best audio fidelity, especially with CarPlay, a wired connection is often preferred over wireless to minimize potential noise.
USB Charging: The front USB ports might offer slower charging speeds, especially when simultaneously running CarPlay/Android Auto.
CANBUS Features: This unit can display vehicle information like speed, RPM, temperature, odometer, and open doors on compatible VW models.
Default Passwords: Common default passwords for settings or Bluetooth pairing are "0000", "8888", or "000000".

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's contact information or visit the official BQCC website. Keep your purchase receipt as proof of purchase.

PDF User Manual: A detailed PDF user manual may be available for download from the seller or manufacturer's website. (Reference: Download PDF Manual)

BQCC F9070W