SQ11 SQ11

Contents

SQ11 Mini Camera User Manual

Model: SQ11 | Brand: SQ11

Introduction

Thank you for purchasing the SQ11 Mini Camera. This compact and versatile device is designed for various recording needs, offering Full HD 1080P video, motion detection, and night vision capabilities. This manual will guide you through the setup, operation, and maintenance of your new camera.

Important Safety Warnings

  • Legal Compliance: Camera products can only be used for purposes permissible under applicable laws and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
  • Operating Temperature: Use the camera under natural temperatures. Do not operate in environments with extreme temperatures unsuitable for human comfort.
  • Operating Humidity: Use the camera in environments with humidity suitable for human living. Do not place the product in damp working environments. The product is NOT waterproof; avoid exposing it to water or rain.
  • Lighting Conditions: When recording, ensure sufficient light. Do not point the camera directly at strong light sources like the sun, as this may damage optical components.
  • Cleaning: Avoid using the camera in environments with excessive dust density to prevent dust contamination of the lens and other components, which can affect camera performance.
  • Disposal: Please dispose of the product responsibly according to environmental regulations. Do not throw the product into fire to avoid explosion.

Package Contents

Please check that all items are present in your package:

  • 1 x SQ11 Mini Camera (Mini Car DVR Camera)
  • 1 x USB Cable
  • 1 x Clip
  • 1 x Stand Clip
  • 1 x User Manual

Product Overview

Familiarize yourself with the camera's components:

SQ11 Mini Camera Function Display Diagram
Figure 1: SQ11 Mini Camera Function Display. Labels include Mode Key, LED Indicator, ON/OFF Key, Sing, Infrared Lamp, Ultra Wide Angle, Mini USB Port, TF Card Port, Reset.
SQ11 Mini Camera Product Parameter Diagram
Figure 2: SQ11 Mini Camera Product Parameter Diagram. Labels include Switch Key, Mode Key, Indicator Light Display Port, Lanyard Hole, SD Card Port, Mini USB Port, Reset Hole, HD Camera, Night Vision Lamp.

Specifications

Feature Detail
ModelSQ11
TypeFull HD Dashcam / Mini Action Camera
High Definition Support1080P (Full-HD)
Camera Pixels1 MP (12M for photos)
Video FormatAVI
Video CodingM-JPEG
Video Resolution1920x1080P, 1280x720P
Video Frame Rate30 fps
Image FormatJPG
Image Resolution12M (4032 x 3024)
Image Proportion4:3
Audio SystemBuilt-in microphone (AAC)
Memory Card TypeMicroSD / TF (Class 10 or higher recommended)
Max External Card Support128GB (not included)
Built-in Memory SizeNon
Battery TypeHigh capacity polymer lithium battery (200mAh)
Working TimeApprox. 60-70 minutes (1080p 30fps)
Charging VoltageDC5V
Charging ModeUSB charging
Interface TypeMini 8Pin USB
Infrared Night Vision Range3-5 meters
Camera StabilizationNONE
Supported SystemsWindows ME/2000/XP/2003/Vista, Mac OS x 10.3.6 or later, Win 7, Linux

Setup

1. Charging the Camera

The camera has a built-in rechargeable lithium battery. For first-time use, please charge the camera fully.

  • Connect the camera to your computer using the provided USB cable.
  • Alternatively, you can charge while recording by connecting to a USB charger or a mobile power bank.
  • During charging, the red indicator light will flash. Once fully charged, the red light will remain solid. It is recommended to charge for an additional 30 minutes after the light turns solid to ensure 100% battery capacity.
SQ11 Mini Camera charging methods
Figure 3: Charging the SQ11 Mini Camera using a mobile power bank or a power outlet adapter.

2. Inserting the MicroSD/TF Card

The camera requires a MicroSD/TF card (Class 10 or higher, up to 128GB, not included) for recording. Ensure the card is inserted correctly before use.

  • Locate the TF card port on the side of the camera (refer to Product Overview).
  • Gently insert the MicroSD/TF card until it clicks into place.
  • Note: If no card is inserted, the red and blue indicator lights will flash for 5 seconds, and the camera will automatically power off.

3. Setting the Time Stamp

To set or remove the time stamp on your recordings:

  • After booting, the camera will automatically create a TIMEREST.txt document in the root directory of the TF card.
  • Connect the camera to your computer via USB. Open the removable disk and locate the TIMEREST.txt file.
  • Edit the file to set the desired time and date. Use the format YYYYMMDDHHMMSSY for a timestamp (e.g., 20160804174726Y).
  • To remove the timestamp, change the last character from Y to N (e.g., 20150608192526N).
  • Save the TIMEREST.txt file and safely eject the camera from your computer. The new setting will apply after the camera reboots.

Operating Modes

Power On/Off

  • Power On: Press the ON/OFF button. The blue indicator light will turn on, indicating standby mode.
  • Power Off: In any function mode (video, photo, motion detection), press and hold the ON/OFF button for approximately 6 seconds until both red and blue lights turn off. If left idle in standby mode for 1 minute, the camera will automatically shut down.

1. 720P Video Recording

  • From standby mode (blue light ON), click the ON/OFF button once.
  • The blue light will flash 3 times and then turn off, indicating 720P video recording has started.
  • The camera records in 5-minute segments and uses loop recording (new recordings overwrite old ones when the card is full).
  • To stop recording, click the ON/OFF button again. The camera will return to blue light standby mode.

2. 1080P Video Recording

  • From standby mode (blue light ON), press the Mode button once. The red and blue lights will turn on, indicating 1080P video mode.
  • Click the ON/OFF button once. The blue light will turn off, and the red light will flash 3 times, indicating 1080P video recording has started.
  • The camera records in 5-minute segments and uses loop recording.
  • To stop recording, click the ON/OFF button again. The camera will return to standby mode.

3. Photo Mode (12M)

  • From standby mode, press the Mode button twice. The red light will turn on, indicating photo mode.
  • Click the ON/OFF button once. The red light will flash once, indicating a photo (4032x3024 pixels) has been taken and saved.

4. Infrared Night Vision

  • To Turn On: In any standby mode, press and hold the ON/OFF button for approximately 2 seconds. The red light will flash twice, and the infrared night vision lamps will turn on.
  • To Turn Off: In any standby mode, press and hold the ON/OFF button for approximately 2 seconds. The red light will flash three times, and the infrared night vision lamps will turn off.

5. Motion Detection Mode

  • 720P Motion Detection: From blue light standby mode, press the Mode key for 3 seconds. The blue light will be ON, and the red light will flash 3 times, then turn OFF, indicating 720P motion detection mode is active. When motion is detected, both red and blue lights will flash, recording 720P video in 5-minute segments. Recording continues until no motion is detected, or the card is full/power runs out. Click any button once to exit motion detection mode.
  • 1080P Motion Detection: From 1080P video mode (red and blue lights ON), press and hold the Mode key for 3 seconds. The red light will flash 3 times, then the blue light will be ON and the red light will flash 3 times, indicating 1080P motion detection mode is active. When motion is detected, both red and blue lights will flash, recording 1080P video in 5-minute segments. Recording continues until no motion is detected, or the card is full/power runs out. Click any button once to exit motion detection mode.
SQ11 Mini Camera Night Vision and Motion Detection Examples
Figure 4: Examples of Night Vision and Motion Detection in use.

6. Recording While Charging

Insert a TF card, then connect the camera to an external 5V USB power supply (e.g., power bank or wall adapter) using the USB cable. The camera will automatically enter 720P video recording mode. It will continue to record until the card is full or power is disconnected. You can manually stop recording or switch modes as needed.

7. TV OUT Mode

Connect the camera to a TV using the provided USB TV cable. After powering on, you can view the camera's feed on the TV screen. In this mode, you can take photos, record videos, and use motion detection functions.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the camera. Avoid using harsh chemicals or abrasive materials. Keep the lens free from dust and fingerprints.
  • Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the camera regularly, even if not in use for extended periods.

Troubleshooting

Camera is unresponsive or buttons do not work:
The camera may have crashed. Use a sharp object (like a pin) to press the Reset hole (refer to Product Overview) to restart the device. After resetting, it should function normally.
Camera does not record or powers off automatically:
Ensure a MicroSD/TF card is properly inserted. If no card is present, the camera will flash red and blue lights for 5 seconds and then power off. Also, check the battery level; if the battery is low, the camera will flash red and blue lights and then shut down after saving any current recording.
Poor image or video quality:
Ensure the camera is used in an environment with sufficient lighting. Maintain a distance of more than 50 cm from the subject for optimal clarity and natural colors. Clean the lens if it appears smudged.
Computer does not recognize the camera or removable disk does not appear:
Try resetting the camera and re-plugging it into the computer's USB port. Ensure the USB cable is securely connected.
Video playback is not smooth when connected via USB:
It is recommended to use a card reader to directly access and play video files from the MicroSD/TF card. Direct playback via USB may be slow due to large data volumes.
Camera feels warm during operation:
This is a normal phenomenon. Due to the high power consumption of HD recording and the zinc alloy casing, the product may generate some heat during use. This does not indicate a defect.

User Tips

  • Smartphone Connectivity: Please note that this camera does not support direct connection to smartphones for live viewing or control. Recordings must be accessed via a computer or card reader.
  • Optimal Recording: For best results, especially in 1080P mode, ensure the camera is fully charged and has a high-speed (Class 10 or higher) MicroSD card.
  • Versatile Use: The compact size and included clips/stand make it suitable for various applications, including home security, office monitoring, aerial photography (e.g., drones), and outdoor sports.
SQ11 Mini Camera usage scenarios
Figure 5: Various usage scenarios for the SQ11 Mini Camera, including home, office, aerial, and outdoor activities.

Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or retailer from whom you purchased the SQ11 Mini Camera. Keep your proof of purchase for warranty purposes.

A PDF version of this user manual is available for download: User Manual (PDF)

© 2024 SQ11 Mini Camera. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.