CHANZON High Power LED Chip User Manual

I. Warning & Safety Information

Do not use in damp or high-temperature environments.
Avoid direct exposure of eyes to the light beam.
Ensure power is disconnected before installation.

II. Product Overview

The CHANZON High Power LED Chip is designed for various lighting applications, including plant grow lights. It features high luminous intensity, energy efficiency, and an extended service life.

**Figure 1:** Various CHANZON LED chips, including 1W, 3W, 5W, 10W, 20W, 30W, 50W, and 100W models, showing different emitting colors (Royal Blue, Full Spectrum, Deep Red) and their application for plant growth.

Video 1: Product demonstration video showcasing the CHANZON LED chips, including close-ups of the chip design, packaging, and a live test of the full spectrum light output.

III. Setup Instructions

Turn off the power supply completely before beginning installation.
Secure the LED chip (bead) firmly in the intended position. Ensure proper contact for heat dissipation.
Connect the LED chip to the appropriate power supply, observing polarity (Anode + and Cathode -).

LED chip internal structure and polarity — **Figure 2:** Internal structure and polarity of CHANZON LED chips: 1W/3W/5W chips feature 100% copper holder, 2 gold wires, and marked cathode (-). 10W and 20W/30W/50W/100W chips also feature 100% copper holder and 2 gold wires, with anode (+) and cathode (-) clearly indicated.

IV. Operating Instructions

Once the LED chip is securely installed and connected to the power supply, the unit is ready for use. Turn on the power supply to activate the LED chip.

V. Maintenance & Precautions

Do not disassemble the LED chip arbitrarily, as this may damage the unit and void any support.
Avoid frequent on/off switching, which can reduce the service life of the LED chip.
Ensure adequate ventilation and heat dissipation during operation. Overheating can significantly shorten the lifespan of the LED.
Keep the LED chip clean and free from dust or debris to maintain optimal light output and heat dissipation.

VI. Troubleshooting

Lamp does not light up: Check the power supply connection and ensure it is providing the correct voltage and current. Verify all wiring connections are secure and correct.
Excessive heating: Ensure the installation location provides sufficient ventilation. Consider adding a heatsink if not already in use, or improve airflow around the chip.
Uneven light distribution: Adjust the LED chip's angle or position. If the issue persists, the chip may be faulty and require replacement.

VII. Specifications

Below are the general specifications for CHANZON High Power LED Chips. For detailed electrical characteristics per color and wattage, refer to Figure 3.

Attribute	Value
Brand Name	CHANZON
Model Number	3Watt 5Watt 380Nm - 840Nm 440 660 Nm Smd Cob Light-Emitting Diode Led
Item Type	BALL
Certification	CCC
Origin	Mainland China
High-concerned chemical	None

LED chip dimensional diagrams — **Figure 3:** Dimensional diagrams for CHANZON LED chips: 1W/3W/5W (7.2mm base, 5.1mm height), 10W (29mm base, 5.7mm height), and 20W/30W/50W/100W (56mm base, 4mm height).

Detailed LED chip specifications table — **Figure 4:** Detailed specifications table for CHANZON LED Grow Chips, including Royal Blue (440nm), Deep Red (660nm), and Full Spectrum (380-840nm) variants. Specifications cover Power (1W to 100W), Forward Voltage, Forward Current, Luminous Flux, and Quantity per pack.

Light spectrum visualization — **Figure 5:** Visual representation of the light spectrum, showing the range from Ultraviolet (UV) to Infrared (IR), with specific wavelengths highlighted for Royal Blue (440nm), Full Spectrum (380-840nm), and Deep Red (660nm).

**Figure 6:** Spectral distribution graphs for Deep Red 660nm, Royal Blue 440nm, and Full Spectrum LED chips. The Full Spectrum graph indicates 70% Red, 20% Blue, and 10% other colors covering 400nm-480nm, optimized for plant, seed, and flower growth.

VIII. User Tips

For Royal Blue LED chips, the primary wavelength is 440nm, which is ideal for specific stages of plant growth.
Ensure you match the LED chip's wattage and voltage requirements with your power supply to prevent damage.
Always use appropriate heatsinks for high-power LED chips to ensure longevity and stable performance.

IX. Warranty & Support

CHANZON provides online consultation and after-sales support for its products. For any issues or inquiries, please contact the manufacturer's support channels.

For further details, you may refer to the official user manual PDF: CHANZON High-Power LED Chip User Manual (PDF)