Logitech G PRO 2 LIGHTSPEED Wireless Gaming Mouse

1. Setup Instructions

Follow these steps to set up your Logitech G PRO 2 LIGHTSPEED Wireless Gaming Mouse.

1.1 Connecting the Wireless Receiver

1. Locate the wireless receiver and USB adapter in the accessory box.
2. Plug one end of the provided cable into your PC.
3. Plug the other end of the cable into the USB adapter and receiver.
4. Alternatively, the receiver can be plugged directly into your PC. However, using the cable and adapter in wireless mode is recommended for better connectivity and easier access for recharging.

1.2 Powering On the Mouse

5. Turn the mouse on using the switch located on the bottom of the mouse.

1.3 Installing Logitech G HUB Software

6. Download the Logitech G HUB software from logitechG.com/support/pro-2-lightspeed. This software allows for customization of button programming, report rate, and tracking behavior.

1.4 Charging the Mouse

7. To charge the mouse, disconnect the cable from the adapter and plug it directly into the front of the mouse.
8. When plugged in directly to a PC, the mouse will operate in data-over-cable mode.
9. A full charge from an empty battery typically requires approximately 2 hours when plugged into a PC USB port.

1.5 Setup Tips for Optimal Performance

• Keep the mouse and receiver at least 2 meters (6.5 feet) away from wireless routers or other 2.4GHz wireless devices to minimize environmental noise and interference.
• The PRO 2 LIGHTSPEED has a wireless range of up to 10 meters (33 feet). For optimal performance in noisy wireless environments and easy access to the charging cable, it is recommended to keep the receiver within 20 cm (8 inches) of the mouse.

2. Button Configurations

The PRO 2 LIGHTSPEED mouse features replaceable buttons and button caps that attach magnetically. These should be stored in the box when not in use. The replaceable buttons support various configurations, making the mouse ambidextrous.

2.1 Fully Programmable Buttons Overview

The mouse features 8 fully programmable buttons, in addition to the scroll wheel click. These can be customized using the Logitech G HUB software.

1. Left Click (Button 1)
2. Right Click (Button 2)
3. Wheel Click (Button 3)
4. Back (Button G4)
5. Forward (Button G5)
6. Back (Button G6)
7. Forward (Button G7)
8. DPI Cycle (Button 8, located on the bottom of the mouse)
9. Receiver storage door + POWERPLAY module enclosure (bottom of mouse)
10. On/Off switch (bottom of mouse, not programmable)

For visual diagrams of button placements and configurations (right-handed, left-handed, no buttons, full buttons), please refer to the official user manual PDF available at the support link provided in Section 6.

3. Battery Life and Charging

The PRO 2 LIGHTSPEED is equipped with a rechargeable 290mAH LiPol battery.

3.1 Estimated Battery Life

• Up to 95 hours of non-stop gaming at a 1ms report rate with lights off.
• Up to 60 hours of non-stop gaming at a 1ms report rate with RGB color cycling on.

*Battery life and capacity may vary with age and use. Rechargeable batteries have a limited number of charge cycles.

3.2 Checking Charge Level

The charge level can be checked when the mouse is powered on or by assigning a button in Logitech G HUB to check the charge level. The mouse's DPI indicator will display the charge level for seven seconds upon power-on:

• 3 green dots: 50-100% charge
• 2 green dots: 30-50% charge
• 1 green dot: 15-30% charge
• 1 flashing red dot: Less than 15% charge

Tip: The bottom dot will flash red when the battery is at 15% or less. When this occurs, plug in your mouse to charge. You can also program a button to show the charge level using G HUB, where you can view detailed charge level, power draw, and estimated remaining battery life.

4. Logitech G HUB Software

Logitech G HUB is essential for customizing your PRO 2 LIGHTSPEED mouse. It allows you to:

• Customize onboard profile settings.
• Program buttons for various functions.
• Adjust the report rate.
• Modify tracking behavior.
• Set up to 5 different DPI settings.

Default DPI Settings: 400, 800, 1600, 3200, 6400

Default Report Rate: 1ms

Download the software from logitechG.com/GHUB.

5. DPI/Onboard Profile Indicators

DPI/Onboard profiles are indicated by three LEDs located under the main buttons. The pattern of illuminated LEDs corresponds to the active DPI profile. For visual representations of these LED patterns, please refer to the official user manual PDF.

6. Specifications

6.1 Packaging Contents

• GPW4 Suzaku Gaming Mouse (TF2)
• USB LIGHTSPEED adapter
• USB A to USB C charging/data cable
• Adapter extension cord
• Optional grip
• Optional case back with PTFE feet
• User documentation

7. Troubleshooting

If you encounter issues with your Logitech G PRO 2 LIGHTSPEED mouse, consider the following common troubleshooting steps:

• Mouse Not Responding: Ensure the mouse is powered on and the wireless receiver is securely plugged into a USB port on your PC. Try a different USB port.
• Connectivity Issues: Verify that the receiver is within 20 cm of the mouse, especially in environments with many other wireless devices. Keep the receiver and mouse at least 2 meters away from other 2.4GHz wireless devices (like Wi-Fi routers) to minimize interference.
• Charging Problems: Ensure the USB charging cable is properly connected to both the mouse and a powered USB port on your PC. Allow sufficient time for charging (approx. 2 hours for a full charge).
• Inaccurate Tracking/DPI Issues: Check your DPI settings in Logitech G HUB. Ensure the mouse sensor is clean and free from obstructions.
• Button Malfunction: If a button is not working, check its assignment in Logitech G HUB. For replaceable side buttons, ensure they are correctly seated and magnetically attached.
• Software Not Detecting Mouse: Make sure Logitech G HUB is installed and up to date. Restart the software and your PC if necessary.

For more detailed troubleshooting and frequently asked questions, please visit the official Logitech G support page: logitechG.com/support/pro-2-lightspeed.

8. User Tips

Maximize your experience with the Logitech G PRO 2 LIGHTSPEED mouse with these helpful tips:

• Customize with G HUB: Take full advantage of the Logitech G HUB software to personalize DPI settings, button assignments, and lighting effects to match your gaming style.
• Optimal Receiver Placement: For the most stable wireless connection, especially during intense gaming, keep the wireless receiver as close to the mouse as possible, ideally within 20 cm.
• Regular Charging: To avoid interruptions during use, make it a habit to charge your mouse overnight or when you're not using it for extended periods.
• Clean the Sensor: Periodically clean the optical sensor on the bottom of the mouse with a soft, dry cloth to ensure consistent and accurate tracking.
• Experiment with Button Configurations: Utilize the magnetic, replaceable side buttons to find the most comfortable and efficient setup for your grip and game.

9. Warranty and Support

Logitech provides comprehensive support for its products. For detailed warranty information, please refer to the documentation included with your product or visit the official Logitech website.

For further assistance, product registration, and access to the latest drivers and software, please visit the official support page:

logitechG.com/support/pro-2-lightspeed

An official user manual in PDF format is also available for download: View User Manual (PDF)

©2024 Logitech. Logitech, Logitech G, Logi and their respective logos are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other countries. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.