1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your Himist Galaxy Star Projector. Please read this manual thoroughly before use and retain it for future reference.
1.1. Packing List
Upon unpacking, please ensure all items are present:
- Projector lamp x 1
- Projection Disc x 1 (pre-installed)
- Additional Projection Slides x 6
- Type-C Cable x 1
- User Manual x 1
A detailed PDF version of this manual is also available for download: User Manual (PDF).
2. Product Overview
Familiarize yourself with the components and controls of your projector.
2.1. Key Features
2.2. Functional Module Diagram
- Sound Hole: For audio output.
- Charging Indicator Light: Indicates charging status (red for charging, green for full).
- Type-C 5V-2A Power Input: Connects to the power source.
- Projection Image Definition Adjustment Knob: Rotate clockwise/counter-clockwise to adjust focus until the image is clear.
- Star Projection: Activates the star projection feature.
- Night Light: This light operates in conjunction with the projector lamp and cannot be controlled independently. It will automatically turn off after blinking for approximately 705 seconds.
- Bluetooth: Activates Bluetooth pairing.
- White Noise Button: Plays/pauses white noise.
- Next Music Button: Skips to the next song in Bluetooth music mode.
- Projection Switch Button: Turns projection on/off.
- Volume Adjustment Knob: Rotate clockwise to increase volume, counter-clockwise to decrease volume.
- Switch of The Lamp: Controls the main lamp.
- Timing Indicator Light: Indicates the active timer setting.
- Timing Button: Sets the automatic shutdown timer.
- Projection Rotational Speed Adjustment: Adjusts the rotation speed of the projection.
3. Setup
3.1. Charging Instructions
For first use, please fully charge the device. Connect the projector to a 5V-2A power adapter (not included) using the provided Type-C cable. The charging time may vary depending on the power source. The charging indicator light will be red while charging and turn green when fully charged.
If the product indicates low power, please turn it off and charge it for at least 10 minutes before resuming use.
3.2. Changing Projection Discs
To change the projection scene, follow these steps:
- Gently pull the existing disc out from the projection lamp slot.
- Remove the original projection slide from the disc holder. Insert the new projection slide into the holder, ensuring it is correctly oriented (e.g.,