MatSee Plus PJ-1203

Contents

User Manual: MatSee Plus Tuya Smart Life ZigBee Energy Meter

Model: PJ-1203

Brand: MatSee Plus

Introduction

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your MatSee Plus Tuya Smart Life ZigBee Energy Meter. This device is designed to monitor electricity usage, including voltage, current, power, and kilowatt-hours (kWh), for appliances up to 80A. It integrates with the Tuya Smart or Smart Life application via a ZigBee gateway, allowing for remote monitoring and energy statistics.

MatSee Plus ZigBee Energy Meter with current sensor clamp and app display
Overview of the MatSee Plus ZigBee Energy Meter, current sensor clamp, and its display within the Tuya Smart Life application.

Safety Information

WARNING: Failure to follow these instructions may result in death, serious injury, fire, electric shock, or damage to the Power Clamp and other property. Read all safety notices before using the Power Clamp.

Safety Installation

  • The power clamp must be installed and serviced only by qualified electrical personnel.
  • Do not touch the terminals of the device during testing.
  • Turn off all power supply for this equipment before installing.
  • Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
  • Always use a properly rated voltage sensing device to confirm power is off.
Danger Electric Shock Warning Symbol
Danger Electric Shock Warning Symbol.

Safety Handling

  • Avoid high humidity or extreme temperatures.
  • Avoid long exposure to direct sunlight or strong ultraviolet light.
  • Do not drop or expose the unit to intense vibration.
  • Do not disassemble or try to repair the unit on your own.
  • Do not expose the unit or its accessories to flammable liquids, gases, or other explosives.

Package Contents

The package typically includes:

  • 1 x MatSee Plus ZigBee Energy Meter (Model PJ-1203)
  • 1 x Current Sensor Clamp (CT)
  • 1 x User Manual (this document, or a printed version)

Specifications

Feature Specification
Brand Name MatSee Plus
Model PJ-1203
Input Voltage AC 100-240V, 50/60Hz
Measuring Range 0.2A - 80A
Wireless Protocol ZigBee
WiFi Frequency 2.4Ghz (Not Support 5Ghz)
Compatibility All Compatible (Tuya Smart, Smart Life App)
State of Assembly Ready-to-Go
Certification CE, RoHS
Device Dimensions 50mm x 45mm x 23mm (Length x Width x Height)
Clamp Diameter 10mm
Working Temperature -10°C ~ +55°C
Package Dimensions 10cm x 10cm x 3cm
Package Weight 0.126 kg
Dimensions of the ZigBee Energy Meter and Current Transformer Clamp
Physical dimensions of the energy meter (50mm x 46mm) and the current clamp (10mm diameter, 0.7m cable).
Diagram showing the 80A current capacity and various appliances it can monitor
The energy meter supports a maximum measured current of 80A, suitable for monitoring various household appliances like ovens, air conditioners, washing machines, refrigerators, and kettles.
ZigBee Energy Meter mounted on a 35mm DIN Rail
The energy meter is designed for mounting on a 35mm DIN rail.

Setup

1. Download the App

To use the energy meter, you need to download either the 'Smart Life' or 'Tuya Smart' application on your smartphone. These apps are available on the App Store (for iOS) and Google Play Store (for Android).

Important: Ensure you already have a Tuya ZigBee gateway and it is configured with the app before attempting to add this ZigBee Meter.

App download QR codes and network diagram for ZigBee devices
Scan the QR codes to download the Smart Life or Tuya Smart app. The diagram illustrates the network connection: Router (2.4G WiFi) to Gateway (WiFi) to ZigBee Meter (ZigBee) and Router (Internet) to Server (WiFi/GPRS) to App (Android/iOS).

2. Add the Device to the App

Once the app is installed and your ZigBee gateway is set up:

  1. Open the Smart Life or Tuya Smart app.
  2. Ensure the ZigBee Energy Meter is powered on.
  3. Press the reset button on the meter for approximately 5 seconds until the red LED light flashes quickly. This indicates pairing mode.
  4. In the app, navigate to your ZigBee gateway and select "Add subdevice" or similar option.
  5. Follow the on-screen prompts. If the device is blinking, confirm "LED already blink" in the app.
App screenshots showing 'Add subdevice' and 'LED already blink' options for pairing
App interface for adding a subdevice to the ZigBee gateway and confirming the device's LED status for pairing.

3. Wiring Diagram

WARNING: Ensure the power supply is completely turned off before performing any wiring. Installation should be performed by qualified electrical personnel.

Connect the energy meter according to the following diagram:

Wiring diagram for the ZigBee Energy Meter with current sensor clamp
Wiring diagram showing connections for Live (L) and Neutral (N) wires to the meter, and the current sensor clamp around a single wire of the measured device. The meter also has S1 and S2 terminals for the clamp.

Note: Please only put ONE wire (either the live wire or the neutral wire, NOT BOTH) into the current transformer clamp. If both wires are put together, the reading value will be zero.

The current transformer (CT) clamp model is PJCT-110301, with a ratio of 80A 1000:1. The wires from the CT clamp connect to the S1 and S2 terminals on the meter. The red wire typically connects to S1 and the black wire to S2.

Operation

After successfully adding the device and completing the wiring, you can monitor electricity usage through the app.

  1. Once the device is added, click 'DONE' in the app.
  2. The app will display real-time data such as Voltage, Current, and Power (in Watts).
  3. You can also view historical data for KWH consumption over days, months, or years.
  4. The app provides an overview of energy saving, costs, and usage duration.
App screenshot showing successful device addition and real-time electricity monitoring
App interface after successful device addition, displaying real-time voltage, current, and power readings.
App screenshots showing real-time power and historical KWH data
Screenshots of the app displaying real-time power (209.8W) and historical KWH consumption data over time.
App screenshots showing energy saving overview and detailed consumption
App interface providing an energy saving overview, including usage in kWh, costs, and daily average costs, along with detailed consumption graphs.

Maintenance

Uninstalling the Clamp

WARNING!!! FOR SAFETY. If you need to remove the current transformer clamp, please be sure to turn off the power of the measuring device first. Otherwise, there is a risk of electric shock.

Always ensure the circuit is de-energized before attempting to remove or adjust the current clamp.

Troubleshooting

Q: After I configure it with the App, why does the App show 'Device is power off'?

A: The app will show 'Device is power off' if the current sensor clamp is not sensing any current. This typically happens if:

  • No wire is placed through the clamp.
  • Both the live and neutral wires are placed through the clamp (only one wire should pass through).
  • The device being measured is not turned on.

To resolve this, ensure you put only one wire (either live or neutral, not both) into the clamp, and turn on the device you wish to measure. The clamp will then sense the current, and the app will show it is working.

App screenshot showing 'Device is power off' and correct clamp wiring example
The app displaying 'Device is power off' when no current is detected, illustrating the importance of correct clamp wiring around a single live wire.

User Tips

  • Home Assistant Integration: Many users have successfully integrated this energy meter into Home Assistant via Zigbee2mqtt. This allows for advanced automation and data logging.
  • Calibration: If you notice discrepancies with your main electricity meter, you might need to apply an offset calibration within your smart home system (e.g., Home Assistant) to match the readings accurately.
  • CT Clamp Cable Size: The current transformer (TC) hole is designed to fit cables up to 16mm in diameter.
  • Accuracy: When correctly installed and calibrated, the meter can provide highly accurate readings, with some users reporting less than 0.5% deviation from their smart meters.

Warranty and Support

For warranty information, technical support, or further assistance, please refer to the seller's official store or contact their customer service. A digital version of this user manual is available for download at this link.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.