1. Introduction
The Zigbee Door Window Sensor is a smart home security device designed to detect the opening and closing status of doors, windows, drawers, and other entry points. It works with a Zigbee 3.0 hub to provide real-time monitoring, history records, and can be integrated into smart routines with platforms like Home Assistant, Amazon Alexa, and Google Assistant.
Image: Zigbee Door Window Sensor, showing compatibility with Zigbee 3.0 Hub, Zigbee2MQTT, Home Assistant, Amazon Alexa, and Google Assistant.
2. Safety Information and Precautions
- Do not install the product outdoors, on an unstable base, or anywhere unprotected from rain or excessive moisture. This device is not waterproof.
- Avoid placing magnetic metals or other objects near the product during installation, as this may interfere with its operation.
- Ensure the installation surface for the door sensor is smooth, flat, dry, and clean for optimal adhesion.
- Keep out of reach of children.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified personnel for service.
3. Package Contents
The package typically includes the following items:
- Main Sensor Body
- Magnet
- User Manual (this document)
- Reset Pin (for pairing)
- Adhesive Tape (pre-applied or separate)
Image: Contents of the sensor package, including the main sensor, magnet, user manual, and reset pin.
4. Specifications
| Parameter | Value |
|---|---|
| Product Name | Door & Window Sensor |
| Model Number | ZG-102ZA |
| Wireless Protocol | Zigbee / 433MHz (Optional) |
| Sensing Distance | < 15mm (typically less than 5mm for optimal performance) |
| Working Voltage | DC 3V |
| Battery Type | CR2032 |
| Standby Current | < 10uA |
| Operating Temperature | -10°C ~ 55°C |
| Operating Humidity | 0% ~ 99% RH |
| Luminance Meter | 0-1000lux (Only for versions with additional luminance sensor) |
| Product Size (Main body) | 50 × 25 × 11mm |
| Product Size (Magnet) | 30 × 14 × 10mm |
Image: Diagram showing the dimensions of the sensor components and key features like real-time monitoring, history record, battery, routines, and a wide gap tolerance of less than 5mm.
5. Installation Instructions
The sensor consists of two parts: the main body and a magnet. These two parts must be installed on the door/window frame and the moving part (door/window) respectively, ensuring they are aligned and close to each other when the door/window is closed.
-
Choose an Installation Location: Select a clean, dry, and flat surface on your door or window frame. The main body should be fixed on the stationary part (frame) and the magnet on the moving part (door/window). Ensure the gap between the two parts is less than 5mm when the door/window is closed.
Image: Diagram illustrating the correct alignment of the main sensor body and magnet on a door/window, highlighting the alignment mark and the recommended gap of less than 5mm.
- Clean the Surface: Wipe the chosen installation areas with a clean cloth to remove any dust or grease. This ensures strong adhesion of the tape.
- Attach the Sensor: Peel off the protective film from the adhesive tape on the back of the main sensor body and the magnet. Firmly press each part onto its designated surface. Ensure the alignment marks on both parts face each other.
- Verify Placement: Open and close the door/window a few times to confirm that the sensor and magnet remain securely attached and that the gap is maintained for proper detection.
The sensor can be mounted on various surfaces:
Image: Sensor mounted on a window frame.
Image: Sensor mounted on a door.
Image: Sensor mounted on a drawer.
6. Network Configuration (Pairing)
To connect your sensor to your smart home system, follow these steps:
-
Power On the Product: Open the battery cover of the main sensor body and remove the battery insulation film. Close the cover. The sensor is now powered on.
Image: Illustration of removing the battery insulation film to activate the sensor.
-
Enter Pairing Mode: Using the provided reset pin, press and hold the RESET button on the main sensor body for approximately 3 seconds, then release it. The red LED indicator will flash rapidly, indicating that the sensor is in network configuration (pairing) mode.
Image: Close-up of the sensor showing the location of the RESET button and the action of pressing it with a pin.
- Add Device in Your Smart Home App: Open your Zigbee gateway's app (e.g., Tuya Smart Life, Home Assistant, Alexa app with a compatible hub) and follow the instructions to add a new device. The app should detect the sensor in pairing mode.
- Confirm Connection: Once successfully paired, the red LED on the sensor will stop flashing, and the device will appear in your smart home app. You can then rename it and assign it to a room.
Important Notes:
- The Zigbee version product must be connected to a Zigbee gateway (hub) to function properly and upload data to the server/APP.
- If you have the 433MHz version, it must be connected to a 433MHz gateway to function properly.
7. Function Description and Operation
The Zigbee Door Window Sensor provides the following functionalities:
- Open/Close Detection: The primary function is to detect when a door or window is opened or closed. This status is reported to your connected Zigbee gateway and smart home app in real-time.
- Real-time Remote Monitoring: View the current status of your doors and windows from anywhere via your smart home app.
- History Record: The app maintains a log of all open/close events, allowing you to review past activity.
-
Smart Scene Linkage: Integrate the sensor into automated routines (scenes) within your smart home system. For example:
- When a door opens, automatically turn on a smart bulb.
Image: Example of a smart scene where opening a door (detected by the sensor) triggers a smart bulb to turn on.
- When a window closes, automatically activate an air purifier.
Image: Example of a smart scene where closing a window (detected by the sensor) triggers an air purifier to start.
- When a door opens, automatically turn on a smart bulb.
-
Voice Control Integration: If your Zigbee hub supports it, you can use voice commands via Amazon Alexa or Google Assistant to check the status of your sensor (e.g., "Alexa, is the bedroom door open?"). Note: Direct linking to Alexa/Google Assistant without a compatible Zigbee 3.0 hub is not supported.
Image: A user interacting with voice assistants (Alexa and Google Assistant) to check the status of a door sensor.
- Luminance Detection (Optional): For versions with an additional luminance sensor, the light value is uploaded after the sensor is triggered. If real-time detection is required, the "Light. Sense Interval Time" needs to be set in the APP. After setting parameters in the APP, the device needs to be triggered once to synchronize the parameters (e.g., from Open to Close).
8. Maintenance
-
Battery Replacement: The sensor uses a CR2032 coin cell battery. When the battery level is low, the sensor will send a low power warning notification through your smart home app (e.g., Tuya/Smart Life) to remind you to replace the batteries in time.
Image: Screenshot of a smartphone app displaying a 'Low battery' warning for the sensor.
To replace the battery, gently open the sensor casing, remove the old CR2032 battery, and insert a new one with the correct polarity. Close the casing securely. - Cleaning: Use a soft, dry cloth to clean the sensor's exterior. Do not use liquid cleaners or abrasive materials, as they may damage the device.
- Firmware Updates: Periodically check your smart home app for any available firmware updates for the sensor. Keeping the firmware updated ensures optimal performance and security.
9. Troubleshooting
- Sensor Not Pairing: If the sensor fails to enter pairing mode or isn't detected by your hub, try removing and re-inserting the CR2032 battery a few times before pressing the reset button again. Ensure your Zigbee hub is in pairing mode and within range.
- Delayed Notifications: If you experience delays in receiving open/close notifications, check the stability and strength of your Zigbee network. Ensure the sensor is within good range of your Zigbee hub or a Zigbee router device.
- Sensor Falling Off: If the adhesive tape is not holding the sensor securely, especially on frequently used or moving parts, consider using stronger double-sided adhesive tape or an alternative mounting method if possible, such as small screws (if the sensor design allows and does not damage internal components).
- Inaccurate Detection: Ensure the main sensor body and the magnet are properly aligned and the gap between them is less than 5mm when the door/window is closed. Magnetic interference from nearby metal objects can also affect accuracy.
10. User Tips
- Home Assistant Integration: Many users report excellent compatibility and instant reaction times when using this sensor with Home Assistant, especially via Zigbee2MQTT (Z2M) or ZHA (Zigbee Home Automation) integrations.
- Compact Size: The sensor's compact design makes it discreet and easy to install in various locations without being obtrusive.
- Optimal Gap: For reliable detection, ensure the gap between the main sensor and the magnet is kept to a minimum, ideally less than 5mm.
- Battery Life: While specific battery life isn't provided, users note good longevity compared to older Wi-Fi alternatives, thanks to the low-power Zigbee protocol.
11. Frequently Asked Questions (FAQ)
- Q: Can this sensor be used outdoors, for example, on a street gate?
- A: No, the sensor is not waterproof and is designed for indoor use only. Exposure to rain or high humidity will damage the device.
- Q: Does it work with SmartThings hub?
- A: While not explicitly listed, as a Zigbee 3.0 device, it is generally compatible with most standard Zigbee hubs, including SmartThings. However, specific compatibility may vary, so it's recommended to check your SmartThings hub's device compatibility list or try pairing it directly.
- Q: Is it compatible with Tuya?
- A: Yes, the sensor is compatible with Tuya and Smart Life apps when connected to a compatible Zigbee gateway.
- Q: How long does the battery last?
- A: The battery life depends on usage frequency and environmental factors. The sensor uses a CR2032 battery and is designed for low power consumption. The app will provide a low battery warning when replacement is needed.
- Q: Does the sensor make any sound or alarm?
- A: No, this device is a sensor only. It detects open/close events and sends a signal to your smart home hub. It does not have a built-in siren or alarm sounder. Alarms or notifications are typically configured through your smart home app or hub.
- Q: What is the depth size of the sensor components?
- A: The main sensor body has a depth of 11mm, and the magnet has a depth of 10mm.
- Q: What kind of battery does it use?
- A: It uses a CR2032 coin cell battery.
12. Warranty and Support
For detailed warranty information and customer support, please refer to the official documentation provided by the seller or manufacturer. A PDF user manual is available for download:
If you encounter any issues not covered in this manual, please contact the seller or your smart home system's support channels for assistance.