ToolkitRC Q4AC

Contents

ToolkitRC Q4AC Quad Smart Charger User Manual

Model: Q4AC

1. Introduction

Thank you for purchasing the Q4AC balance charger. This manual provides detailed instructions for safe and efficient operation of your device. Please read it carefully before use to ensure the best experience and to prevent damage to the product or batteries.

For further information, news, firmware updates, and video tutorials, please visit the official ToolkitRC website: www.toolkitrc.com. A user manual in PDF format is also available for download: User Manual (PDF).

2. Safety Guidelines

Failure to follow these safety instructions may result in fire, property damage, or injury.

  1. The Q4AC supports AC input voltage of 100V-240V and DC input voltage of 10-18V. Ensure the power supply voltage is consistent with the charger's requirements. Pay close attention to the positive and negative polarity when connecting the power supply.
  2. Do not use this product in environments with high heat, humidity, flammable liquids, or explosive gases.
  3. Always operate this charger under supervision. Never leave charging batteries unattended.
  4. When not in use, always unplug the input power from the charger.
  5. When using the charging function, set a current that matches the battery's specifications. Avoid setting an excessive current to prevent battery damage. Always consult your battery manufacturer's guidelines for correct charging instructions.
  6. Choosing the wrong battery type to charge may damage the battery, the charger, and cause fire or other dangers. Please choose carefully.
  7. Do not use this product to charge batteries that are not marked with a battery type.

3. Product Overview

The ToolkitRC Q4AC is a versatile four-channel balanced charger featuring an IPS display and intuitive scroll wheel menu navigation for easy operation.

Key Features:

  • Battery Compatibility: Supports charge, discharge, and balance management for LiPo, LiHV, LiFe, Lion (1-4S), NiMh (1-10S), and PB (1-8S) batteries.
  • Power Modes: AC 100-240V (max 100W) and DC 10-18V (max 200W).
  • Charging Power: Max 5A @ 50W per channel (x4).
  • Discharging Power: Max 2A @ 5W per channel (x4).
  • Charging Accuracy: <0.005V.
  • Balancing Current: 240mA.
  • Adjustable Cut-off Voltage: Lithium battery cut-off voltage (TVC) can be set.
  • Smart Power Allocation: Automatically allocates input power.
  • Multi-language System: Supports multiple languages.
  • Firmware Updates: Connects to a PC via USB for easy firmware updates by copying and pasting files.
  • Battery Memory: Can record settings for 5 commonly used batteries.
  • Power Source Memory: Can record 3 groups of commonly used power sources for quick selection.
  • Display: 3.5-inch IPS screen with 480x320 resolution, offering a bright and clear wide-angle view.

Q4AC Layout and Components:

Front layout of the ToolkitRC Q4AC charger
Front Layout: Features the IPS Display, Scroll Wheel (Turn: Left or Right, Press: OK), CH/Exit button, four Output Main Ports, and four Balance Ports.
Back layout of the ToolkitRC Q4AC charger
Back Layout: Includes a Micro USB port, DC Input port (DC10-18V), Cooling fan, and AC Input port (AC100-240V).
Battery output options XT60 and XT30
Battery Output Options: The Q4AC offers both XT60 and XT30 options for greater convenience.
IPS Bright and clear wide angle display
IPS Display: A 3.5-inch IPS screen with 480x320 resolution provides a bright and clear wide-angle view.

4. Setup (Quick Start)

  1. Connect Power: Connect the AC100-240V or DC10-18V power supply to the corresponding input port on the back of the Q4AC.
  2. Boot Up: The screen will display the boot logo for 2 seconds, accompanied by a 'di-di' sound.
  3. Main Interface: After booting, the screen enters the main interface, showing the status of the four charging channels.
Q4AC Main Interface Display
The main interface displays the status of all four channels.
  1. Channel Selection: Short press the [CH/Exit] button to cycle through and select one of the four channels.
  2. Display Information: Scroll the [Scroll Wheel] to switch the display of voltage and internal resistance for the selected channel.
  3. Select Task: Short press [OK] to select a charging task when a channel is idle. You can adjust and end the charge when a channel is in progress.
  4. System Settings: Long press [OK] to enter the system setting interface (only when all four channels are free).
  5. Exit/Confirm: Short press [CH/Exit] to end modifications or return to the previous interface.

Tips for Navigation:

  • Short press [Scroll Wheel] once to confirm a function.
  • Long press [Scroll Wheel] for 2 seconds to activate the delete key function.
  • A 'didi' sound confirms successful key operation.

5. Operating (Charging Settings)

From the main interface, select a channel and short press [OK] to enter the charging function. If battery selection is enabled in system settings, you can choose from 5 saved battery records. Otherwise, it defaults to the first battery record.

5.1. Battery Type

Scroll the [Scroll Wheel] to move the cursor and select an existing battery type or create a new one. Press [OK] to enter the battery setting interface.

The charger supports LiPo, LiHV, LiFe, Lion, NiMh, and PB battery types. After selecting the type that matches your battery, short press [OK] and [CH/Exit] to apply the setting and return to the previous interface.

Important Vocabulary:

  • LiPo: Lithium Polymer battery, nominal 3.70V, 4.20V when fully charged.
  • LiHV: High-voltage Lithium battery, nominal 3.85V, 4.35V when fully charged.
  • LiFe: Lithium Iron battery, nominal 3.30V, 3.60V when fully charged.
  • Lion: Lithium-ion battery, nominal 3.60V, 4.10V when fully charged.
  • NiMh: Nickel-hydrogen battery, nominal 1.20V.
  • PB: Lead-acid battery, nominal 2.00V.

5.2. Number of Cells

Move the cursor to "Cells" and press [OK] to modify the number of battery cells (e.g., 1S, 2S, 3S, 4S). Scroll the [Scroll Wheel] to adjust the value.

When set to "Auto", the charger automatically identifies the number of cells based on the battery voltage connected to the output port. Short press [OK] and [CH/Exit] to apply.

Tips for Cell Count:

  • Over-discharge or overcharge can cause battery cell identification errors.
  • Incorrect cell count settings can lead to insufficient charging or battery damage. Set carefully.
  • For Lixx batteries, connecting to the balance port allows for more accurate identification of battery string numbers.

5.3. Work Mode

Move the cursor to "Mode" and press [OK] to select the work mode. Options include "Charge" and "StoCHG" (Storage Charge).

LiPo, LiHV, LiFe, and Lion batteries can be charged and stored. NiMh and PB batteries typically only have a "Charge" option. Short press [OK] and [CH/Exit] to apply.

5.4. End Voltage (TVC)

Move the cursor to "End Voltage" and press [OK] to modify the end voltage of the single-cell battery. Scroll the [Scroll Wheel] to adjust the value in 0.01V steps.

  • Charging Mode: This is the charging cut-off voltage, with a range of ±50mV of the full voltage.
  • Discharge Mode: This is the discharge cut-off voltage.

Important Notes on End Voltage:

  • Only LiPo, LiHV, LiFe batteries allow setting the cut-off voltage.
  • Do not modify the cut-off voltage if you are unfamiliar with the battery characteristics.
  • TVC stands for Terminal Voltage Control.

5.5. Charging Current

Move the cursor to "Charging Current" and press [OK] to modify the current. Scroll the [Scroll Wheel] to adjust the value in 0.1A steps. Quickly scrolling will increase or decrease the value faster. The charger supports up to 5.0A per channel.

Charging Current Tip:

Set the charging rate to 1-2C according to the battery capacity. For example, for a 2000mAh battery, set the charging current to 2.0-4.0A. Always check your battery manufacturer's guidelines.

5.6. NiMh Setting (PeakV)

When the battery type is NiMh, you can set the negative pressure value (PeakV) at which the battery is considered fully charged. The setting range is 5mV-15mV.

PeakV Explanation:

PeakV refers to the point where the voltage of each cell drops after the NiMH battery is fully charged.

5.7. Charging Work Interface

Once charging begins, the charger displays the working interface:

Q4AC Charging Work Interface Display
The charging work interface shows real-time charging data.

Scroll the [Scroll Wheel] on this interface to switch the display between internal resistance and voltage values for the corresponding channel. Short press [OK] to dynamically adjust the working current or stop the process.

Display Content Description:

  • 11.90V: Input power supply voltage.
  • 1.2A: Input power current.
  • 0.8Wh: Accumulated power consumption of the input power.
  • 39.3°C: Internal temperature of the charger.
  • 16.72V: Main port voltage of the first channel.
  • 1.00A: Main port current of the first channel.
  • 003:55: Working time of the first channel.
  • 61mAh: Cumulative capacity of the first channel.
  • 4.177V: First battery voltage.
  • 4.178V: Fourth battery voltage (under balance management).
  • -.--V: No battery connected.
  • 1mΩ: Internal resistance of the first battery.

To end charging/discharging, short press [OK], move the cursor to [Stop], then short press [OK] again. The charger will stop and return to the main interface. A prompt box with a sound will appear upon completion or error.

Important Charging Tips:

  • Always supervise charging to handle abnormalities safely.
  • When charging a lithium battery, connecting only to the main port will not perform balance management. Connect to the balance port for automatic balance management.
  • After charging, unplug the battery. If you insert a new battery, the device will automatically continue charging/discharging according to the set mode. If a fixed number of cells is set, ensure the new battery has the same cell count. If auto-detection is enabled, verify the detected cell count matches the actual number.

6. System Settings

Long press [OK] on the main interface to enter system settings (only when all channels are idle).

6.1. Input Settings

Short press to expand input-related settings:

  • Power selection: Fixed to P1 when AC power is connected. When DC is input, P1 and P2 can be selected, allowing users to set power, current, and voltage.
  • Max power: Maximum power absorbed from the input port during charging.
  • Max current: Maximum current drawn from the input port during charging.
  • Lowest voltage: Lowest allowable input voltage.

6.2. Security Settings

Short press to expand safety settings:

  • Safe Inter. Temp.: If the internal temperature exceeds this value, the device will stop the main port output.
  • Safe time: Maximum continuous charging time. Charging stops if exceeded.
  • Safe capacity: Maximum capacity for continuous charging. Charging stops if exceeded.

6.3. Other Settings

  • Continuous work: Determines whether charging continues after replacing a battery. Ensure the next battery requires the same settings.
  • Work completed: Whether to stop or trickle charge after the main charge is over.
  • Battery selection: Whether to skip the battery selection interface when starting a charge.
  • Backlight: Backlight brightness level (1 to 10).
  • Buzzer: Tone of the buzzer (can be set to off).
  • Language: System display language (English, Chinese, etc.).
  • Theme style: Two styles available: Light and Dark.
  • Default: Restores all settings to factory values.
  • ID: Unique device factory settings ID (e.g., FF3705D8-SW1.00-HW1.2).

7. Other Functions

7.1. Firmware Upgrade

Connect the Q4AC to your computer using the provided USB data cable. The computer will recognize a USB drive named "Toolkit". Download the latest firmware file (app.upga) from the official ToolkitRC website. Copy and paste the new file, overwriting existing files on the USB drive, to upgrade the firmware.

7.2. Automatically Continue Charging

When a battery is fully charged, if you unplug it for 2 seconds and then connect another battery, the device will automatically continue charging. This function can be enabled or disabled in the system settings menu.

7.3. Fan Level

  • If the internal temperature exceeds 42°C, the fan will activate at half-speed to reduce noise.
  • If the internal temperature exceeds 50°C, the fan will operate at full-speed to enhance heat dissipation.

7.4. Manual Voltage Calibration

While the charger is off, press and hold the [Scroll Wheel]. Connect the power supply while holding the wheel. The system will enter manual voltage calibration mode. Use a voltmeter to measure the actual voltage of each battery. Move the cursor to the corresponding voltage value on the screen and adjust it to match the voltmeter reading. After calibration, move the cursor to "Save" and short press once. The buzzer will beep, indicating successful save. You can then exit or shut down.

7.5. Fully Charged Indication

When a lithium battery is fully charged, the charger will display "Fast charging has ended". If the battery is not removed, a constant voltage trickle charge will automatically be performed to keep the battery full.

8. Specifications

Feature Specification
Input VoltageAC100-240V@MAX1.5A / DC10-18V@MAX20A
Battery TypeLiPo/LiHV/LiFe/Lion (1-4S), NiMh (1-10S), PB (1-8S)
Balance Current240mA @2-4S
Charging Accuracy<0.005V
Charge Power (DC Input)0.1-5A@50W*4
Charge Power (AC Input)0.1-5A@50W*2 or 0.1-5A@25W*4
Discharge Power0.1-2A@5W*4
USB PortUpgrade@USB
Battery Voltage Range1.0V-5.0V @1-4S
Battery Internal Resistance1-100mR @1-4S
DisplayIPS 3.5 inch, 480*320 Pixel
Product Size150mm * 112mm * 36.5mm
Product Weight450g
Individual Packing Size160mm * 160mm * 46mm
Individual Packing Weight600g
MaterialPOLYESTER
CertificationCE, FCC, RoHS

9. User Tips

Based on feedback from other users, here are some helpful tips for using your Q4AC charger:

  • Great for Small Batteries: The Q4AC is particularly well-suited for charging smaller batteries, especially up to 4S LiPo, making it ideal for applications like indoor RC flying.
  • Intuitive Operation: Users find the charger intuitive and easy to use, thanks to its clear IPS display and scroll wheel navigation.
  • Fast Charging: When paired with an adequate power supply, the Q4AC can charge multiple batteries simultaneously at impressive speeds, significantly reducing wait times.
  • Included Cables: The product typically includes an AC power cable (EU plug shown in images) and a USB cable for convenience.
  • Input Voltage Caution: The DC input range is 10-18V. Do not attempt to use power sources outside this range, such as a 48V bicycle battery, as it can damage the unit.

10. Troubleshooting

  • Charger Not Powering On: Ensure the AC or DC input power is correctly connected and within the specified voltage range (AC 100-240V, DC 10-18V). Check for proper polarity on DC input.
  • Charging Errors/Battery Damage:
    • Verify that the correct battery type (LiPo, LiHV, etc.) is selected in the settings.
    • Confirm the number of cells (S-count) is accurately set or correctly auto-detected.
    • Ensure the charging current is appropriate for your battery's capacity (1-2C rate recommended).
    • Do not modify end voltage settings unless you are familiar with battery characteristics.
  • Charger Stops Unexpectedly: Check the 'Safe Inter. Temp.', 'Safe time', and 'Safe capacity' settings in the Security Settings menu. If any of these limits are reached, the charger will stop for safety.
  • Fan Noise/Operation: The cooling fan will activate at half-speed above 42°C and full-speed above 50°C to manage internal temperature. This is normal operation.
  • Inaccurate Voltage Readings: Perform a manual voltage calibration as described in section 7.4 using a precise voltmeter.
  • Battery Not Balancing: Ensure the balance lead of your lithium battery is correctly connected to the charger's balance port.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official ToolkitRC website (www.toolkitrc.com) or contact your retailer. Keep your proof of purchase for warranty claims.

© ToolkitRC 2022. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.