KALADA 18 in 1 Car Ambient Lights

Contents

User Manual: KALADA 18 in 1 Dual Zone Symphony Streamer Car Ambient Light

Model: 18 in 1 Car Ambient Lights

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your KALADA 18 in 1 Dual Zone Symphony Streamer Car Ambient Light. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Installed ambient lighting kit in a car interior, showing multi-color illumination.

Image: Installed ambient lighting kit in a car interior, showing multi-color illumination.

Package Contents

Please verify that all components listed below are included in your package:

Detailed view of the product components, including light strips, power cords, foot sockets, storage lights, main controller, sub-controllers, and installation tools.

Image: Detailed view of the product components, including light strips, power cords, foot sockets, storage lights, main controller, sub-controllers, and installation tools.

  • Light strips (various lengths: 90cm x1, 75cm x4, 25cm x1)
  • Main controller (1 unit)
  • Sub-controllers (4 units)
  • Host power cord/button (1 unit, 102.5cm)
  • Foot socket lights (4 units, 214cm each)
  • Storage lights (4 units, 50.5cm each)
  • Door bowl lamps (4 units)
  • Auxiliary power cords (5 units, 47cm each)
  • Extension cables (2 units, 132cm + 61cm)
  • Adhesive tape (1 roll)
  • Rocker tool (1 unit)
  • Instruction manual (1 unit)

Setup and Installation

Careful planning and execution are key for a successful installation. It is recommended to test all components before final installation.

1. Installation Locations

The system comprises one main controller and four sub-controllers. The main controller manages several lights, while each sub-controller handles lights for a specific car door.

Diagram showing installation locations within a car interior (footwell, center console, contour, handle, saddle, storage lights) and the app interface for intelligent remote control.

Image: Diagram showing installation locations within a car interior (footwell, center console, contour, handle, saddle, storage lights).

  • Main Controller: Install on the center console. Connects to the center console light strip, instrument handle lamp lights, etc.
  • Sub-controllers (4 units): Install one in each of the four car doors. Connects to the respective door light strip, handle light, storage box light, etc.

2. Wiring Instructions

Ensure correct wiring to avoid damage to the product or vehicle.

Instructions on how to cut the LED light strips and wiring diagrams for the main module (fuse box connection) and door module (ACC pin power supply).

Image: Instructions on how to cut the LED light strips and wiring diagrams for the main module and door module.

  • Main Module Power: Connect the main module to the fuse box using the provided plug-in power supply.
  • Door Module Power: Power the door modules via the ACC pin type power supply on the door.
  • Light Strips: The light strips can be cut to length. However, ensure you do not cut into the individual lamp beads. Cut sections are not reusable.

3. App Download and Installation

To control the ambient lights via your smartphone, download the companion app:

  1. Search for 'LED LAMP' in your device's app store (e.g., Apple App Store, Google Play Store).
  2. Alternatively, scan the QR code provided in the manual or on the product packaging to download the app.
  3. After installation, enable Bluetooth on your mobile phone and grant any necessary access permissions requested by the app.

Operating Instructions

1. App Operation

The 'LED LAMP' app allows for intelligent remote control of your ambient lighting system.

App interface for intelligent remote control.

Image: App interface for intelligent remote control.

  1. Initial Setup: Upon first use, pull down to refresh the app. It should automatically scan and add nearby atmosphere lighting equipment. If manual addition is needed, identify the device by the name 'LEDCAR01' and its RGB DMX icon.
  2. Connecting Devices: The app displays connected devices (BLE, LED, DMX).
  3. Main Control Interface: Click on the device icon to enter the main control interface. From here, you can:
    • Adjust brightness (0-100).
    • Select colors using a color disc or color ring.
    • Choose from common colors or DIY common colors.
    • Switch between static color, dynamic streamer, DIY mode, and music mode.
    • Access setup and light switch functions.

2. Button Control

The main controller features dual control buttons for basic functions:

  • 'M' Button: Controls the illusion light.
  • 'S' Button: Controls the RGB light.
  • Long Press: Press and hold either button to turn off the lights.
  • Short Press: Briefly press either button to switch modes or turn on the lights.

Other functions, such as speed and brightness adjustments, are exclusively controlled via the app.

Various color modes of the ambient lighting.

Image: Various color modes of the ambient lighting.

Maintenance

  • Keep the light strips and controllers clean by wiping them with a soft, dry cloth.
  • Avoid using harsh chemicals or abrasive cleaners, as these can damage the acrylic and electronic components.
  • Ensure all connections remain secure.

Troubleshooting

App Connection Issues

  • Cannot connect or control via app:
    • Verify that your phone's Bluetooth function is turned on.
    • Check if the device is already connected to another phone.
    • Try restarting the app.
    • If issues persist, restart the ambient light device.
  • App crashes: If the app recently crashed, uninstall and then re-download it.

Individual Light or Sub-controller Malfunction

  • If a specific sub-controller or light strip is not working, first check its wiring connections for looseness or damage.
  • Ensure that the matching lights and connecting wires are used for installation.
  • If a sub-controller is confirmed to be faulty, contact customer support for assistance.

Specifications

FeatureSpecification
Brand NameKALADA
Model Name18 In 1 Car Ambient Lights
Item TypeAtmosphere lamp
Special FeaturesButton /APP Dual control, dual zone
Voltage12 V
MaterialAcrylic
Item Weight0.6 kg
Light Strip Lengths75cm, 110cm (as shown in diagrams)
Package Dimensions (L x W x H)25cm x 25cm x 8cm
Package Weight0.554 kg
CertificationCE

User Tips

  • Installation Planning: The light strips are not highly flexible, so carefully plan your placement before installation. Consider where they can be discreetly and effectively installed.
  • Panel Removal: Removing car interior panels can be challenging. Watch YouTube videos or consult car-specific forums for guidance on safely removing panels for your vehicle model to avoid damage.
  • Wiring Complexity: Tapping into the car's electrical system can be tricky. If you are unsure, consider seeking professional installation to ensure proper and safe wiring.
  • Brightness: Users have noted the excellent brightness of these lights, making them a great choice for enhancing car ambiance.

Warranty and Support

For detailed information regarding warranty coverage, returns, or technical support, please refer to the official user manual PDF or contact the seller directly.

A comprehensive user manual in PDF format is available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.